Operating instructions


8
"MOJO" Series Unvented Gas Log Sets
The sides of the fire-
place opening must be at least 16" from any combustible
wall. The ceiling must be at least 42" from the top of the
fireplace opening.


   minimum clearances   




Follow these instructions carefully to ensure safe installation. Failure to
follow instructions exactly can create a fire hazard.
16"
42"
FP1996
wall ceiling clearances
FP1996
Figure 4 -
Sidewall and Ceiling Clearances



To install the gas logs into a fireplace with no wooden
mantel, shelf or other combustible projection above the
fireplace opening, measure the heat resistant material
height according to TABLE A.
Heat resistant materials such as slate and marble must 


TABLE A -
Heat Resistant Material Requirements with no Mantel
or Combustible Projection
FP1997
heat resistant material
Heat Resistant
Material
Heater in Fireplace or
Firebox
FP1997
Measure
This
Distance
Figure 5 -
Measuring Heat Resistant Material

  
  
12” or more Hood not required
8” or less than 12” Extend heat resistant material to 12”
 install hood. 
Less than 8” Extend heat resistant material to at
least 8”  install hood. 
  extend heat resistant material to a
height of at least 12".