Specifications
16
NBST27 Unvented Gas Log Set
- This unit is supplied with 10 ceramic
fiber logs. Do not handle the logs with bare hands. Always
wear gloves to prevent skin irritation from ceramic fibers.
After handling the logs, wash your hands gently with soap
and water to remove any traces of fibers.
1. Place dime size pieces of rock wool evenly over small
burner ports starting at pilot and down each side of
burner. Avoid placing rock wool on slots on either side
of burner between the air defectors. . Wash
hands after placing rock wool. Skin irritation may oc-
cur.
2. Place flickering bright embers (FBE-.1G) before plac-
ing logs on burner. Pull embers apart into small strands
and place on top of existing rock wool on both sides of
burner from the air deflectors to the end of each burner
where they can be seen. Try to avoid stacking these
embers on top of each other. Use smaller strands for
maximum effect. Use as much as needed to achieve
desired effect.
LG649
NBST embers
Flickering
Bright Embers
Rock wool
LG649
Figure 18 -
Place Flickering Bright Embers
LG648
NBST rockwool
Pilot
Rockwool
Rock Wool
LG648
Figure 17 -
Place Rock Wool
Horizontal
Grate Bar
Grate Tine
Grate Tines
Horizontal
Grate Bar