Twin Wall Pro Installation file

90° Bend Inspection

135° Tee

LONG 135° Tee

90 degree bend with a fully condensing P1 access plug (with seals), this allows full inspection on

90 deg changes of direction allowing sweeping in 2 directions.

The 135° Tee is used when you need a cleaning access at the base of the chimney. It is the

ﬁrst piece installed on the external wall and allows for ease cleaning of the ﬂue. The 135° Tee is

shaped in such away that it does not restrict the ﬂue gases.

The Long 135° Tee is used when you need a cleaning access at the base of the chimney. It is

the ﬁrst piece installed on the external wall and allows for ease cleaning of the ﬂue. The 135° Tee

is shaped in such away that it does not restrict the ﬂue gases, it has a extra-long branch that will

reach through most standard UK wall constructions.

Ø 80 Ø 100 Ø 125 Ø 150 Ø 175 Ø 200 Ø 250 Ø 300

- 10-100-042 2-125-042 2-150-042 10-175-042 10-200-042 60-250-042 60-300-042

- - - - - - - -

Ø 80 Ø 100 Ø 125 Ø 150 Ø 175 Ø 200 Ø 250 Ø 300

10-80-034 10-100-034 2-125-034 2-150-034 10-175-034 10-200-034 60-250-034 60-300-034

- 50-100-034 30-125-034 30-150-034 50-175-034 50-200-034 - -

- - 17-125-034 17-150-034 - - - -

- - 14-125-034 14-150-034 - - - -

Ø 80 Ø 100 Ø 125 Ø 150 Ø 175 Ø 200 Ø 250 Ø 300

10-80-044 10-100-044 2-125-044 2-150-044 10-175-044 10-200-044 - -

- 50-100-044 30-125-044 30-150-044 50-175-044 50-200-044 - -

- - 17-125-044 17-150-044 - - - -

- - 14-125-044 14-150-044 - - - -

ELBOWS AND TEES

15° Bend

2 segment 15 degree bend, for offset details see table on page 40

Ø 80 Ø 100 Ø 125 Ø 150 Ø 175 Ø 200 Ø 250 Ø 300

10-80-033 10-100-033 2-125-033 2-150-033 10-175-033 10-200-033 60-250-033 60-300-033

- 50-100-033 30-125-033 30-150-033 50-175-033 50-200-033 - -

- - 17-125-033 17-150-033 - - - -

- - 14-125-033 14-150-033 - - - -

TWPro