Twin Wall Pro Installation file

SUPPORTS

Wall Band 210-420mm

Structural Locking Band

Adjustable Base Support

Adjustable Base Support 80-280mm

Wall support are to be used for lateral support only and should be use a minimum of every 3

meters. Only recommended ﬁxings should be used to ﬁt the wall support to the building surface.

This wall band allows you to set a distance of 80mm (minimum) and 420mm (maximum)

adjustment from the wall surface allowing a 340mm adjustment. This wall support has to be

manually cut down to achieve the desired effective length.

The Structural Locking Band replaces the standard locking band where an unsupported length

of up to 2.9 meters is required. These should be used on each joint above and the joint below

the ﬁnal wall support.

Adjustable Base Supports are used internally or externally to provide vertical support to the

chimney. This support has a small levelling adjustment of 50mm to 80mm from the wall surface.

See page 38 for loading data.

Only recommended ﬁxings should be used to ﬁt this base support to the building surface.

Adjustable Base Supports are used internally or externally to provide vertical support to the

chimney. This support has an adjustment of 80mm to 280mm from the wall surface. See page

38 for loading data.

Only recommended ﬁxings should be used to ﬁt this base support to the building surface.

Ø 80 Ø 100 Ø 125 Ø 150 Ø 175 Ø 200 Ø 250 Ø 300

15-80-055 15-100-055 15-125-055 15-150-055 15-175-055 15-200-055 65-250-055 65-300-055

- 55-100-055 30/55-125-055 30/55-150-055 55-175-055 55-200-055 - -

- - 17/56-125-055 17/56-150-055 - - - -

- - 14/54-125-055 14/54-150-055 - - - -

Ø 80 Ø 100 Ø 125 Ø 150 Ø 175 Ø 200 Ø 250 Ø 300

10-80-054 10-100-054 2-125-054 2-150-054 10-175-054 10-200-054 60-250-054 60-300-054

- 50-100-054 50-125-054 50-150-054 50-175-054 50-200-054 - -

- - 17-125-054 17-150-054 - - - -

- - 14-125-054 14-150-054 - - - -

Ø 80 Ø 100 Ø 125 Ø 150 Ø 175 Ø 200 Ø 250 Ø 300

10-80-060 10-100-060 2-125-060 2-150-060 10-175-060 10-200-060 60-250-060 60-300-060

- 50-100-060 50-125-060 50-150-060 50-175-060 50-200-060 - -

- - 17-125-060 17-150-060 - - - -

- - 14-150-060 14-150-060 - - - -

Ø 80 Ø 100 Ø 125 Ø 150 Ø 175 Ø 200 Ø 250 Ø 300

10-80-063 10-100-063 2-125-063 2-150-063 10-175-063 10-200-063 60-250-063 60-300-063

- 50-100-063 30-125-063 30-150-063 50-175-063 50-200-063 - -

- - - - - - - -

TWPro