Twin Wall Pro Installation file

TWPro is a high quality, multi-fuel, stainless steel twin wall
chimney system designed for use with all solid fuel, wood,
coal, gas, oil and pellet heating appliances. It is tested to a
maximum operating temperature of 600°C and comes with a
25 year warranty.
TWPro has exceptional thermal properties which have allowed
it to be classified as G50. The 50mm clearance required to
combustible materials also applies when it is installed in an
enclosure. Enclosed or exposed, always G50 !
The 25mm high density mineral insulation is injected into the
cavity of the chimney under high pressure; this improves the
thermal efficiency of the system which in turn helps maintain
constant and reliable flue performance.
The TWPro range has the largest selection of starting
components of any chimney system available in the U.K.
This enables you to complete the installation with the most
aesthetically pleasing transition from stove to chimney
possible.
Whilst TWPro is available off the shelf in an unrivalled
selection of Satin black, White, Grey and Stainless Steel,
it can also be powder coated to virtually any RAL colour of
your choice. All powder coated finishes are U.V. resistant and
therefore perfectly suited to external applications.
Locking bands are included with each component as required;
the standard locking band will provide lateral support for up
to 1.9 metres of pipe above the final wall support. Structural
locking bands are available and allow an additional metre
height.
TWPro is suitable for installation on both dry and condensing
appliance applications. (Silicone seals are required for
condensing appliances).
KEY BENEFITS
OIL
CONDENSING
OIL
COAL
WOOD
GAS
G
GAS
CONDENSIN
WOOD
PELLET
4
|
TWPro