Warranty

SERVICES TO BE PROVIDED BY THE DEALER (con't.)

SERVICE FACILITIES

Mi-T-M

Authorized Service Centers are required to provide a fully equipped service shop. The following is

a list of minimum tools required to properly service most Mi-T-M

pressure washers and air compressors:

• An assortment of hand tools (metric and U.S.)

• Pressure gauge (water up to 5000 PSI)

• Pressure gauge (oil up to 300 PSI)

• Tachometer

• Torque wrench

• Electric drill

• Battery charger

• Air compressor

• Anti-freeze hydrometer

• Snap ring pliers (internal and external)

• Volt OHM meter/load bank

• Work bench with vice

In addition to the tools listed previously the Servicing Dealer must have ready access to:

• 120 and 208-230 volt single phase electric power

• 208-230 and 460 volt three phase electric power

• Water supply of not less than 6 GPM

• Inside storage capabilities

QUALIFIED PERSONNEL

Authorized Service centers must employ a minimum of one full time service technician. The technician is to

attend Service Training seminars as needed.

TECHNICAL LIBRARY

The Servicing Dealer is obliged to maintain the provided literature in an organized fashion. This includes

replacing the old with updated information that is provided free of charge by Mi-T-M

. Mi-T-M

will supply

one master catalog; additional catalogs must be purchased.

PARTS INVENTORY

The Dealer must maintain an adequate stock of parts to be able to service the most common repairs

(i.e. valves, packings, nozzles, strainers, air filters, regulators, etc.)