Mi-T-M Corporation 1971 - 2018 Made in the USA Amid all the hustle and bustle of one of the fastest growing towns in Iowa, Made in you’ll find the Mi-T-M Corporation. The thriving community of Peosta is home to this American manufacturing success story.
PRESSURE WASHERS nd le e r ie s H a S m u in CA Alu m We ld ing HS Series in Test Room J P S e rie s F ra me s o n Po wde r Co at L ine ing r Co il Ro ll H ot Wate HS E S e rie s M ot or Insta llati on
CD Series Pressure Washers Cold Water – Gasoline – Direct Drive Pump: – Forged brass manifold – Thermal relief valve – In-line water strainer – Low pressure detergent injector Frame: – Powder coated steel mounting plate with center balanced lift and four rubber isolators Unit Includes: – Quick connect nozzles - 0°, 15°, 25° and detergent nozzle – 50-foot x 3⁄8-inch non-marking high pressure hose with quick connects – Professional-grade insulated trigger gun with safety lock-off Limited Warranties: – 3 yea
JP Series Pressure Washers Cold Water – Gasoline – Direct Drive Pump: – Forged brass manifold – Thermal relief valve – In-line water strainer Frame: – Powder coated steel frame and base plate with 11⁄4-inch tube handles – Convenient gun/wand holder and hose wrap – 13-inch flat-free tires (10-inch on 2400, 2700 and 3000-PSI models) Unit Includes: – Quick connect nozzles - 0°, 15° and 25° – 50-foot x 3⁄8-inch non-marking high pressure hose with quick connects – Professional-grade insulated trigger gun with
Pressure Washers CA Aluminum Series Cold Water – Gasoline – Direct Drive Pump: – Forged brass manifold – Thermal relief valve – In-line water strainer Frame: – Lightweight, corrosion-resistant aluminum frame and base plate with 11⁄4-inch tube handles – Patented vibration isolation plate with four rubber isolators – Convenient gun/wand holder – 13-inch flat-free tires (10-inch on 2400, 2700 and 3000-PSI models) Unit Includes: – Quick connect nozzles - 0°, 15° and 25° – 50-foot x 3⁄8-inch non-marking high p
CBA Aluminum Series Pressure Washers Cold Water – Gasoline – Belt Drive Pump: – Forged brass manifold – Thermal relief valve – Water filter with clear sleeve for screen inspection Frame: – Lightweight, corrosion-resistant aluminum frame and base plate with 11⁄4-inch tube handles – Patented vibration isolation plate with four rubber isolators – Convenient gun/wand holder – Two-piece belt guard for quick access to belts – 13-inch flat-free tires Unit Includes: – Quick connect nozzles - 0°, 15°, 25° and 40°
Pressure Washers JCW Series Cold Water – Gasoline – Belt Drive Pump: – Forged brass manifold – Thermal relief valve – Water filter with clear sleeve for screen inspection Frame: – Powder coated steel frame and base plate with 11⁄4-inch tube handles – Convenient gun/wand holder and hose wrap – Two-piece belt guard for quick access to belts – 13-inch flat-free tires (10-inch on 2400, 2700 and 3000-PSI models) Unit Includes: – Quick connect nozzles - 0°, 15°, 25° and 40° – 50-foot x 3⁄8-inch non-marking high
CW Premium Series Pressure Washers Cold Water – Gasoline – Belt Drive Pump: – External bypass system allows more water into the system to protect from heat build-up – Forged brass manifold (Nickel plated brass on 4000-PSI models) – Thermal relief valve – Water filter with clear sleeve for screen inspection Frame: – Powder coated steel frame and base plate with 11⁄4-inch tube handles – Convenient gun/wand holder and hose wrap – Two-piece belt guard for quick access to belts – 13-inch flat-free tires Com
Pressure Washers CWC Premium Series Cold Water – Gasoline – Belt Drive Pump: – External bypass system allows more water into the system to protect from heat build-up – Forged brass manifold – Thermal and safety relief valves – Water filter with clear sleeve for screen inspection (High capacity water filter on CWC-3008-4MGH) Frame: – Powder coated steel frame with 11⁄4-inch roll cage, handles and lifting hook – Convenient gun/wand holder and hose wrap – Two-piece belt guard for quick access to belts – 13-i
CW Premium Series Pressure Washers Cold Water – Diesel – Belt Drive Pump: – External bypass system allows more water into the system to protect from heat build-up – Forged brass manifold – Thermal relief valve – Water filter with clear sleeve for screen inspection Frame: – Powder coated steel frame and base plate with 11⁄4-inch tube handles – Convenient gun/wand holder and hose wrap – Enclosed belt guard – 13-inch flat-free tires Unit Includes: – Quick connect nozzles - 0°, 15°, 25° and 40° – 50-foot x 3⁄
CD Series Pressure Washers Cold Water – Electric – Direct Drive Pump: – Forged brass manifold (Nickel plated brass on 2MUH models) – Thermal and safety relief valves – Low pressure detergent injector Motor: – Totally enclosed fan-cooled electric motor with thermal overload protection – 35-foot, 15-amp power cord (20-amp on CD-1502 models) with ground fault circuit interrupter, GFCI Frame: – Powder coated steel mounting plate with center balanced lift and four rubber isolators Unit Includes: – Var
JP Series Pressure Washers Cold Water – Electric – Direct Drive Pump: – Forged brass manifold (Nickel plated brass on 2ME1 models) – Thermal and safety relief valves – Low pressure detergent injector Motor: – Totally enclosed fan-cooled electric motor – 35-foot power cord (GFCI on 1.5 to 6.0-HP single-phase models) (10-foot power cord on 8.
Pressure Washers CW Premium Series Cold Water – Electric – Belt Drive Pump: – External bypass system allows more water into the system to protect from heat build-up – Forged brass manifold – Thermal relief valve – Water filter with clear sleeve for screen inspection Motor: – Totally enclosed fan-cooled electric motor with thermal overload protection – 10-foot power cord Frame: – Powder coated steel frame and base plate with 11⁄4-inch tube handles – Convenient gun/wand holder and hose wrap – Totally enclos
CW Premium Series Pressure Washers Cold Water – Electric – Belt Drive – Stationary Pump: – Forged brass manifold – Thermal relief valve – Quick connect low pressure detergent injector – Pump accepts incoming water up to 175°F Motor: – Open drip-proof electric motor (1000 and 3000-PSI models) – Totally enclosed fan-cooled electric motor with manual thermal overload protection (2000-PSI models) – 4-foot power cord with GFCI Frame: – Stainless-steel cabinet design with removable panel – Four rubber isolators
Pressure Washers HSP Series Hot Water – Gasoline – Direct Drive Pump: – Preset stainless-steel and brass unloader valve – Forged brass manifold – Thermal relief valve – Low pressure detergent injector (Available as an option on HSP-2503-0MMH) Frame: – Reinforced powder coated steel tube frame with center balanced lift – Convenient gun/wand holder and hose wrap – 13-inch flat-free tires Components: – No. 1 or No.
HSP Series Hot Water Designs Pressure Washers HSP Series Patented EMF System In 1999, Mi-T-M Corporation received the patent for a unique ignition/firing system, called the Electro Magnetic Firing (EMF) System, which produces enough voltage for operation and proper burning of the HSP Series hot water pressure washers. This system is designed with two sets of magnets that are used to produce electricity.
HS Series Pressure Washers Hot Water – Gasoline/Diesel – Belt Drive Pump: – External bypass system allows more water into the system to protect from heat build-up – Factory preset unloader – Forged brass manifold – 80-mesh, high-volume, stainless-steel screen inlet water strainer Engine: – Electric start - battery included Frame: – Heavy-duty powder coated steel 11⁄2-inch square tube frame Components: – 2900-watt generator – Heavy-duty dual cogged belt drive system – No. 1 or No.
HS Series Pressure Washers HS-3505-1MGH shown on dual-axle trailer, AW-9000-0003 with hose reel accessory Accessories & Options: PART NUMBER DESCRIPTION FITS MODELS PART NUMBER DESCRIPTION FITS MODELS 20-1070A18 20-1366A52 All models All models 50-0177 850-0324 AW-5740-0000 AW-6000-1006 AW-8400-0021 Removable painted front panel Black powder coated painted rain cap, octagonal Stack adapter Gasket (for 50-0177) Wheel kit Hot water skid equipment cover Low pressure detergent injector HX-0130 HX-0
Single & Dual-Axle Trailers Pressure Washer Accessories Features: – Swivel jack with pad – 2-inch ball hitch – Rubber mounted sealed lights – Tanks are enclosed in a powder coated steel frame – Will fit all Mi-T-M belt-driven pressure washers – Aluminum treadplate steps for access to water tank – Storage area located under the water tanks (AW-9000-0003 and AW-9000-0004 trailers) – (2) 200-gallon water tanks are plumbed together (AW-9000-0003 and AW-9000-0004 trailers) Accessories & Options: – Pressure was
Single & Dual-Axle Trailers Pressure Washer Accessories AW-9000-0003 shown with HS-3505-1MGH hot water pressure washer and hose reel (available as accessories) Trailer Accessories and Options High Pressure Hose Reels Trailer Tank Bypass Low Pressure Hose Reels TX-0005 (For use on AW-9000-0003 and AW-9000-0004 trailers with HS Series) TX-0007 (For use on AW-9000-0005, AW-9000-0006, AW-9000-0007 and AW-9000-0008 trailers with a HS Series pressure washer) – Removes the float system, while adding the nece
Pressure Washers HSE Series Hot Water – Electric – Direct Drive Pump: – Forged brass manifold – Thermal relief valve – High pressure detergent injector (Available as an option on 0MM11 models) Motor: – Totally enclosed fan-cooled electric motor with manual thermal overload protection – 35-foot power cord Frame: – Reinforced powder coated steel tube frame with center balanced lift – Convenient gun/wand holder and hose wrap – 13-inch flat-free tires Components: – Energy-efficient top-fired heat exchanger –
HSE Series Pressure Washers Hot Water – Electric – Belt Drive Pump: – External bypass system allows more water into the system to protect from heat build-up – Forged brass manifold – Thermal relief valve – High pressure detergent injector Motor: – Totally enclosed fan-cooled electric motor with manual thermal overload protection – 35-foot power cord Frame: – Reinforced powder coated steel tube frame with center balanced lift – Convenient gun/wand holder and hose wrap – 13-inch flat-free tires Component
Pressure Washers HAE Series Hot Water – All-Electric – Belt Drive Pump: – Factory preset unloader – Stainless-steel and brass unloader valve – Forged brass manifold – Thermal relief valve Motor: – Open drip-proof electric motor (HAE-2503-0E4G) – Totally enclosed fan-cooled electric motor with manual thermal overload protection (HAE-3004-0E4G) – On/Off power switch Frame: – Stainless-steel base and frame with rubber isolators Component: – Time delay shutdown Heat Exchanger: – Used for consistent and effici
HAE Series Pressure Washers HAE Series Heat Exchanger Design The dual coil heat exchanger design allows each cartridge to heat the water twice, keeping the internal heat of the cartridges constant throughout the system. Heat is transferred into the aluminum casting so the heating element does not come into contact with the water. Since the water does not have direct contact with the heating element this eliminates calcium and build-up on the coils.
HG Series Pressure Washers Hot Water – Natural Gas/LP – Belt Drive Pump: – Factory preset unloader – Thermal relief valve – Adjustable high pressure detergent injector Motor: – Open drip-proof motor with thermal overload protection Frame: – Powder coated steel side panels and frame Components: – Natural gas or LP gas-fired (vapor only) natural draft with aspirating-type burner, 10-inch stack – 24-volt control system – 1⁄2-inch schedule 80-coil heat exchanger – Electronic ignition with an intermittent pilo
Detergents & Pump Oil Pressure Washer Accessories Detergents All detergents are hard water stable to prevent spotting. All Purpose Cleaner All Purpose Cleaner is the most versatile and efficient all-around cleaner. Use on vehicles, glass, stainlesssteel, aluminum, painted surfaces and lawn equipment. This cleaner is environmentally friendly, it will not harm plants and is biodegradable.
Rotary Surface Cleaners Pressure Washer Accessories Rotary Surface Cleaners – Walk-Behind Clean large surfaces faster and easier than with a standard cleaning nozzle. The Mi-T-M rotary surface cleaners are equipped with strong-bristled brushes for long life and easy glide control. This cleaning accessory can be used on decks, patios, sidewalks, driveways, pool decks, parking lots and any other horizontal surface.
Nozzles, Brush & Roll Cages AW-7510-0004 Pressure Washer Accessories 0° 25° Rotating Nozzle Rotating Nozzles Increase your cleaning power and decrease your cleaning time with rotating nozzles. They offer 0° spray impact with 25° coverage. Nozzles include filter with quick connect and offers heavy-duty components for long life and reliability. Can be used on sidewalks, driveways, track vehicles, muddy areas, old peeling paints and concrete surfaces. *Consult factory for correct orifice size.
Pressure Washer Accessories Extension Wands Aluminum Wand Extensions These lightweight, aluminum extension wands allow the user to clean hard to reach areas with ease. AW-7105-7200 (72-inch) AW-7105-3600 (36-inch) AW-7105-9600 (96-inch) AW-7105-4800 (48-inch) – 1⁄4-inch lance saver socket with quick connect plug – 4000-PSI rated – 12.0-GPM flow rate – 300°F temperature rating 50-0201 Gutter Cleaner Turn your wand into an efficient rain gutter cleaner.
Replacement Guns & Wands Pressure Washer Accessories Cold Water Gun and Wand Assemblies Replaces your existing gun and wand assembly.
Injectors & Extension Hoses Pressure Washer Accessories Sand Injector Wet sandblasting is efficient and dust-free. Remove coatings from steel and concrete surfaces. Can be used on rust, paint, stains and graffiti. AW-3000-0000 (Sand injector - carbide tip) – Includes sand probe and clear hose – 5500-PSI rated – Consult factory before ordering 18-0113 (Carbide replacement nozzle) AW-3000-0000 Low Pressure Detergent Injectors Apply recommended detergents with the low pressure detergent injector.
Hose Reels Pressure Washer Accessories Hose Reels A convenient way to store your pressure washer hose. Reel capacities based on R1 Mi-T-M hoses.
Pressure Washer Accessories Packaged Accessories Pivot Coupler The quick connect pivot coupler adjusts to three different cleaning angles to get those hard-to-reach areas. 50-0208 – 1⁄4-inch quick connect – For most cold water pressure washers rated up to 4500-PSI – Connects between the wand and high pressure nozzle High Pressure Swivel Connector O-rings Prevents hose from tangling or twisting. AW-0023-0507 – 5000-PSI maximum pressure – 42.
Replacement Parts Boxes Pressure Washer Accessories Pressure Washer Replacement Parts Box Everything you need for your pressure washer.
Pressure Washer Accessories Parts & Equipment Displays Suggested Stocking Parts: Parts Display Cabinet Perfect for displaying and securing pressure washer parts. – Durable powder coated steel frame – Custom lock keeps merchandise safe and secure – Versatile peg and grid system keeps parts coordinated for easy access – Includes product hooks – 16-in. W x 9-in. D x 24-in.
Equipment Displays Pressure Washer Accessories Equipment Display Risers The perfect way to elevate Mi-T-M industrial equipment. Compact and sturdy to hold air compressors, portable generators, pressure washers, portable heaters and wet/dry vacuums. Stackable for multi-level displays of your Mi-T-M equipment.
Water Transport Trailer Water Trailer Tank: – 510-gallon elliptical low profile 3⁄8-inch thick polyethylene – 16-inch manhole with 4-inch vent and sump pump Central Manifold: – Easy-to-operate butterfly brass valves Plumbing: – 11⁄2-inch fire hose hook-up with 50-foot x 11⁄2-inch hose and fog nozzle – Break-away hydrant fill with 25-foot x 21⁄2-inch hose – Dual rear spray heads – Garden hose connector – Manifold discharge system – Water hammer prevention valve Trailer: – DOT approved – 12-inch under-clear
PWR Series Water Treatment Systems Recovery & Recycle System PWR Series Trailer Package The PWR Series allows for wash water to be reclaimed on the jobsite. Water is reclaimed by using the 20-foot water berm (included) to stop water from flowing down a drain or away from your area. The suction head draws wash water into a holding chamber where a second pump forces the water through an optional 10-micron bag filter before returning it to the holding tank for reuse or proper disposal.
AIR COMPRESSORS er tic We ld o b o R k n Ta n 8 - Ga ll o Applying Decal to AM1-PH65-08M 8 0 - Ga llo n T a n k o n Po wd e r Co at L ine Pump Insta llati on nt r o l B o x Wir ing Co
Work Pro® Series Air Compressors Single Stage – Electric/Gasoline – 3, 4 or 5-Gallon Compressor Pump: – Oil lubricated aluminum crankcase – Copper discharge hose (Electric models) – Stainless-steel braided discharge hose (Gasoline models) – Cartridge air filter Motor: – Thermal overload motor protection Frame: – Powder coated tank design – Protective pump/motor housing Components: – Regulator and two gauges for tank and outlet pressure – Drain and pressure relief valves – Industrial interchange quick conn
Work Pro® Series Air Compressors Single or Two Stage – Electric/Gasoline – 8-Gallon Compressor Pump: – Splash oil lubricated aluminum crankcase – Stainless-steel braided discharge hose – Oil level sight indicator Motor: – Thermal overload motor protection Frame: – Powder coated 8-gallon twin tank receivers – 3⁄16-inch base plate to reduce vibration – 16-gauge powder coated two-piece belt guard – 10-inch flat-free tires (Two-stage models have two tires) Components: – Regulator and two gauges for tank and o
5-Gallon Air Compressors Single Stage – Gasoline Compressor Pump: – Oil lubricated aluminum crankcase – Stainless-steel braided discharge hose – Cartridge air filter Frame: – Powder coated steel frame and roll cage design – 5-gallon powder coated tank receivers Components: – Regulator and two gauges for tank and outlet pressure – Drain and pressure relief valves – Quality pilot valve unloader Limited Warranties: – 1 year compressor pump – 1 year Mi-T-M engine – 3 year Honda engine AM1-HM04-05M This litt
Air Compressors 8-Gallon Single Stage – Gasoline Compressor Pump: – Splash lubricated – Stainless-steel braided discharge hose – Large canister intake filter – Oil level sight indicator Frame: – Powder coated 8-gallon twin tank receivers – 3⁄16-inch base plate to reduce vibration – 16-gauge powder coated two-piece belt guard – 10-inch flat-free tire Components: – Regulator and two gauges for tank and outlet pressure – Manual drain valves for proper maintenance – 12-inch fly wheel – Quality pilot valve unl
20-Gallon Air Compressors Single Stage – Gasoline Compressor Pump: – Splash lubricated – Stainless-steel braided discharge hose – Large canister intake filter – Oil level sight indicator Frame: – Powder coated ASME coded 20-gallon receiver tank – 3⁄16-inch base plate to reduce vibration – 16-gauge powder coated two-piece belt guard – 10-inch flat-free tires Components: – Regulator and two gauges for tank and outlet pressure – Manual drain valves for proper maintenance – 12-inch fly wheel – Quality pilot v
Air Compressors 8-Gallon Two Stage – Gasoline Compressor Pump: – Splash lubricated – Stainless-steel braided discharge hose – Large canister intake filter – Oil level sight indicator Frame: – Powder coated 8-gallon twin tank receivers – 3⁄16-inch base plate to reduce vibration – 14-gauge powder coated two-piece belt guard – 10-inch flat-free tires Components: – Regulator and two gauges for tank and outlet pressure – Manual drain valves for proper maintenance – 161⁄2-inch fly wheel – Quality pilot valve un
20-Gallon Air Compressors Two Stage – Gasoline Compressor Pump: – Splash lubricated – Stainless-steel braided discharge hose – Large canister intake filter – Oil level sight indicator Frame: – Powder coated ASME coded 20-gallon receiver tank – 3⁄16-inch base plate to reduce vibration – 14-gauge powder coated two-piece belt guard – 13-inch flat-free tires (AM2-PH09-20M) Components: – Regulator and two gauges for tank and outlet pressure – Manual drain valves for proper maintenance – 161⁄2-inch fly wheel –
Air Compressors 30 & 80-Gallon / Base-Mount Two Stage – Gasoline Compressor Pump: – Splash lubricated – Stainless-steel braided discharge hose – Large canister intake filter – Oil level sight indicator Engine: – Electric start - battery and cables not included Frame: – Powder coated ASME coded 30 or 80-gallon receiver tank (Tank-mounted models only) – 3⁄16-inch base plate to reduce vibration – 16-gauge powder coated two-piece belt guard – Removable base plate offers flexible installation Components: – Reg
30-Gallon Air Compressors Two Stage – Diesel Compressor Pump: – Splash lubricated – Stainless-steel braided discharge hose – Large canister intake filter – Oil level sight indicator Engine: – Electric start - battery, box and cables not included – Glow plug equipped engine for easy starting in cold temperatures Frame: – Powder coated ASME coded 30-gallon receiver tank – 3⁄16-inch base plate to reduce vibration – 16-gauge powder coated two-piece belt guard – Removable base plate offers flexible installatio
Air Compressors Rotary Screw Single Stage – Gasoline Compressor Pump: – Integrated air/oil separator – Integrated thermostatic bypass valve – Integrated oil filter – Poly Chain® belt drive system – Easy-to-read oil level indicator – High oil temperature shutdown Engine: – Electric start - battery and cables included – Low-oil level shutdown Frame: – Powder coated steel frame with 11⁄4-inch roll cage, handle, 4-point lifting hook, winch point and tie-down anchors – 15-inch pneumatic tires Components: – 101
5-Gallon Air Compressors Single Stage – Electric Compressor Pump: – Oil lubricated aluminum crankcase – Stainless-steel braided discharge hose – Inlet air filter Motor: – Thermal overload motor protection Frame: – Powder coated tank assembly – Protective pump/motor housing Components: – Regulator and two gauges for tank and outlet pressure – Drain and pressure relief valves – Industrial interchange quick connect fittings – Start/stop control set at 95 to 125-PSI Limited Warranties: – 1 year compressor pum
Air Compressors 8-Gallon Single Stage – Electric Compressor Pump: – Splash lubricated – Stainless-steel braided discharge hose – Large canister intake filter – Oil level sight indicator Motor: – Auto start/stop - continuous run optional – Thermal overload motor protection Frame: – Powder coated 8-gallon twin tank receivers – 3⁄16-inch base plate to reduce vibration – 16-gauge powder coated two-piece belt guard – 10-inch flat-free tire Components: – Regulator and two gauges for tank and outlet pressure – M
20-Gallon Air Compressors Single Stage – Electric Compressor Pump: – Splash lubricated – Stainless-steel braided discharge hose – Large canister intake filter – Oil level sight indicator Motor: – Auto start/stop - continuous run optional – Thermal overload motor protection Frame: – Powder coated ASME coded 20-gallon receiver tank – 3⁄16-inch base plate to reduce vibration – 16-gauge powder coated two-piece belt guard – 10-inch flat-free tires Components: – Regulator and two gauges for tank and outlet pres
Air Compressors 80 & 120-Gallon Two Stage – Electric – 80 & 120-Gallon – Simplex & Duplex Compressor Pump: – Splash lubricated – Stainless-steel braided discharge hose – Large canister intake filter – Oil level sight indicator Motor: – Industrial low RPM motor – Magnetic start for thermal overload protection Frame: – Powder coated ASME coded 80 or 120-gallon receiver tank – 3⁄16-inch base plate to reduce vibration – Totally enclosed powder coated belt guard Components: – ASME safety valves – Tank pressure
80 & 120-Gallon Air Compressors SIMPLEX HORIZONTAL MODELS MODEL NUMBER CFM @ PSI HORSEPOWER/MOTOR PUMP RPM COMPRESSOR TANK SIZE DIMENSIONS (LxWxH) BOLT DOWN (LxW) ACS-23105-80H ACS-20305-80H ACS-23305-80H ACS-46305-80H ACS-23175-80H ACS-20375-80H ACS-23375-80H ACS-46375-80H ADS-23110-120H ADS-20310-120H ADS-23310-120H ADS-46310-120H AES-20315-120H AES-23315-120H AES-46315-120H 5.0 HP, 230V, 1Ø, 23.0A 5.0 HP, 200V, 3Ø, 16.1A 5.0 HP, 230V, 3Ø, 13.8A 5.0 HP, 460V, 3Ø, 6.9A 7.5 HP, 230V, 1Ø, 31.0A 7.
Air Compressors M Series Two Stage – Electric – 80 & 120-Gallon – Simplex & Duplex Compressor Pump: – Splash lubricated – Stainless-steel braided discharge hose – Large canister intake filter – Oil level sight indicator Motor: – Industrial low RPM motor – Magnetic start for thermal overload protection Frame: – Powder coated ASME coded 80 or 120-gallon receiver tank – 3⁄16-inch base plate to reduce vibration – Totally enclosed powder coated heavy-duty belt guard Components: – ASME safety valves – Tank pres
M Series Standard Features Air Compressors These standard features are what sets the M Series air compressors apart from our standard line-up.
Air Compressors M Series Two Stage – Electric – 80 & 120-Gallon – Simplex & Duplex SIMPLEX HORIZONTAL MODELS MODEL NUMBER CFM @ PSI HORSEPOWER/MOTOR PUMP RPM COMPRESSOR TANK SIZE DIMENSIONS (LxWxH) BOLT DOWN (LxW) ACS-23105-80HM ACS-20305-80HM ACS-23305-80HM ACS-46305-80HM ACS-23175-80HM ACS-20375-80HM ACS-23375-80HM ACS-46375-80HM ADS-23110-120HM ADS-20310-120HM ADS-23310-120HM ADS-46310-120HM AES-20315-120HM AES-23315-120HM AES-46315-120HM 5.0 HP, 230V, 1Ø, 23.0A 5.0 HP, 200V, 3Ø, 16.1A 5.
AIR COMPRESSOR/ GENERATOR COMBINATIONS er a m We ld e S k n a ssor T Co mp re AG2-SH13-30M in Test Room Be lt G ua rd s o n Po wde r C o at L ine Alte r n ato r n In sta llatio Ga uge Alig nme nt
Air Compressor/ Generator Combinations 8-Gallon / Base-Mount Single or Two Stage – Gasoline Compressor Pump: – Cast iron compressor pump – Splash lubricated – Stainless-steel braided discharge hose – Large canister intake filter – Oil level sight indicator Generator: – Brushless alternator – Total harmonic distortion (THD) less than 5% – 100% copper windings – Comes standard with (2) 120V, 20A and (1) 240V, 20A receptacles (Two-stage models) Frame: – Powder coated 8-gallon twin tank receivers (Portable an
8-Gallon / Base-Mount Air Compressor/ Generator Combinations AG2-PK14-08M1 shown with electric start option, AX-0071 Available in stationary, base-mount or portable, choose the model that best fits your needs.
Air Compressor/ Generator Combinations 30-Gallon Two Stage – Gasoline Compressor Pump: – Splash lubricated – Stainless-steel braided discharge hose – Large canister intake filter – Oil level sight indicator Generator: – Brushless alternator – Total harmonic distortion (THD) less than 6% – 100% copper windings – Comes standard with (2) 120V, 20A and (1) 240V, 20A receptacles Frame: – Powder coated ASME coded 30-gallon receiver tank – 3⁄16-inch base plate to reduce vibration – 16-gauge powder coated two-pie
30-Gallon Air Compressor/ Generator Combinations AG2-PK14-30M shown with electric start option, AX-0071 Engineered to reduce the space necessary to fit in work and service trucks, this combination unit will meet the needs of mobile mechanics.
Air Compressor/ Generator Combinations 30-Gallon Two Stage – Diesel Compressor Pump: – Splash lubricated – Stainless-steel braided discharge hose – Large canister intake filter – Oil level sight indicator Generator: – Brushless alternator – Total harmonic distortion (THD) less than 6% – 100% copper windings – Comes standard with (2) 120V, 20A and (1) 240V, 20A receptacles Engine: – Electric start - battery, box and cables not included – Glow plug equipped engine for easy starting in cold temperatures Fram
Uses & Benefits Air Compressor/ Generator Combinations AG2-SH13-B shown with electric start option, AX-0019 Uses for an Air Compressor/Generator Combination Air Compressor Generator – – – – – – – – – – – – – – – – – – – – Impact wrenches, grinders, drills and nailers Shops Tires Sand blasters Paint sprayers Air/hydraulic pumps Air tools Air jacks Grease pumps Jobsites Power tools Offices Farms Industrial plants Homes Battery chargers Fans Electric/hydraulic pumps Saws, drills and grinders Mobile lig
AIR COMPRESSOR/ GENERATOR/WELDER COMBINATIONS Ce rtified We lde r AGW-SR14-30M in Test Room AS M E Te st A re a sta llatio n We lde r In Pulley Insta llati on
Uses & Benefits Air Compressor/ Generator/Welder Combinations Uses for an Air Compressor/Generator/Welder Combination Air Compressor Generator – – – – – – – – – – – – – – – – – – – – Impact wrenches, grinders, drills and nailers Shops Tires Sand blasters Paint sprayers Air/hydraulic pumps Air tools Air jacks Grease pumps Jobsites Power tools Offices Farms Industrial plants Homes Battery chargers Fans Electric/hydraulic pumps Saws, drills and grinders Mobile lights Welder This stick welder will work
Air Compressor/ Generator/Welder Combinations AGW Series Two Stage – Gasoline – 20-Gallon, 30-Gallon or Base-Mount Compressor Pump: – Splash lubricated – Stainless-steel braided discharge hose – Large canister intake filter – Oil level sight indicator Generator: – Brush-type 2 pole 120V/240V alternator – Total harmonic distortion (THD) less than 6% – 100% copper windings Welder: – Amperage selection switch, 170A or 220A maximum Frame: – Powder coated ASME coded receiver tanks (Not available on AGW-SR14-B)
AGW Series Air Compressor/ Generator/Welder Combinations AGW-SH22-20M Save room on your service truck with this versatile all-on-one solution. AGW Series Operation Accessories & Options: PART NUMBER DESCRIPTION FITS MODELS 70-0380 AW-6000-1002 AW-6000-1003 AX-0070 IX-0001 Engine oil drain extension Equipment cover Equipment cover Battery tray, box and 2-ft.
Air Compressors Certified Vessel Testing Facility Mi-T-M is certified by the American Society of Mechanical Engineers (ASME), Section VIII, Division 1 to design and manufacture “U” and “UM” pressure vessels (air compressor tanks) ranging in size from 20 gallon up to 90 gallon. Mi-T-M’s pressure vessels for the 20, 30 and 80-gallon air compressors are produced by ASME certified welders using state-of-the-art welding equipment such as automatic seam and robotic welders.
Compressor Pumps Air Compressor Accessories Best Pump Warranty in the Industry The Mi-T-M Pump Exchange Program provides Mi-T-M customers pump replacement for the warranty period of two years from the date of purchase. If the air compressor pump fails due to a manufacturing defect during the two year warranty period, Mi-T-M will replace the pump at no charge. The air compressor should be returned to the Mi-T-M authorized dealer where it was purchased.
Plugs, Couplers & Fittings Air Compressor Accessories From fittings to drains, pumps to air chucks and everything in between, Mi-T-M is a one-stop shop for all your air compressor accessory needs. 17-0067 17-0062 23-0415 23-0416 Barbed Hose Splicers 17-0051 Repair damaged hoses by combining hose sections together with our barbed hose splicers. Corrosion-resistant brass construction.
Air Chucks, Hoses, Blow Guns & Drains Air Compressor Accessories AT-3001 Engine Oil Drain Extensions AT-3002 AT-3003 Air Chucks Use air chucks to help maintain proper tire pressure. AT-3001 (Dual foot - 1⁄4-inch FPT) AT-3002 (Ball foot - 1⁄4-inch FPT) AT-3003 (Deluxe air inflator with 12-inch hose; 12 to 120-PSI) 15-0328 15-0230 Air Hoses Ideal for most compressor lines and pneumatic tools. Non-conductive oil and abrasion resistant outer cover.
Air Compressor Accessories Filters, Regulators, Gauges & Lubricators 19-0217 19-0225 Air Filter Canisters Houses air filter elements.
Replacement Pumps & Air Estimating Guide Replacement Pumps – Single Stage Replacement Pumps – Two Stage Single stage replacement pump, aluminum. 3-0425 – Fits single stage electric and gasoline Work Pro ® Series models Two stage replacement pump, aluminum. 3-0427 – Fits two stage gasoline Work Pro ® Series models Replacement Pumps – Single Stage Replacement Pumps – Two Stage Single stage replacement pumps, cast iron with cast iron head.
Air Compressor Accessories Air System Set-up Building an Efficient Air System Compressed-air-powered equipment and machinery are critical elements in the productivity, efficiency and economy of today’s industry. Quality air is the essential element for effective operation of this equipment. Water and dirt can cause major problems in compressed air lines. The use of filters that remove moisture and impurities from the air help high-speed pneumatic production lines operate more efficiently.
PORTABLE GENERATORS a me rato r Fr e n e G n Wo r k o Fin is h ing GEN-7500-0MHE in Test Room Alte rn ato r W ir ing g a ne l Wir in Co nt ro l P App lying De ca l
Portable Generators Inverters 2000 & 3000-Watt – Gasoline Inverter Technology: – Reduced size, weight, noise and fuel consumption – Produces commercial quality AC power for sensitive electronic equipment Alternator: – Total harmonic distortion (THD) less than 3% – Copper windings Engine: – Low-oil shutdown – Recoil start Frame: – Insulated side panels reduce noise – Easy grip handle integrated into frame (Two handles on GEN-3000-IMM0) – Rear folding handle and two wheels for easy transport (GEN-3000-IMM0)
ChoreMaster® Series Portable Generators 3600, 6000 & 8000-Watt – Gasoline Alternator: – Total harmonic distortion (THD) less than 6% – Copper and aluminum windings Frame: – Low profile, compact design – Powder coated wraparound frame with 1-inch steel tubing Components: – Easy-access and protected control panel with magnetic circuit breakers and GFCI-protected receptacles – Large low tone mufflers – Engine on/off switch – Fuel shut-off valve – DC/battery charging Limited Warranties: – 1 year alternator –
Portable Generators 3000 & 5000-Watt 3000 & 5000-Watt – Gasoline Alternator: – Total harmonic distortion (THD) less than 5% – 100% copper windings Frame: – Heavy-duty powder coated wraparound frame with 1-inch steel tubing – Angled isolator design features four neoprene isolators Components: – Easy-access and protected control panel with magnetic circuit breakers and GFCI-protected receptacles – Large low tone mufflers – Fuel shut-off valve – Easy-to-read fuel gauge – Heavy-duty industrial air cleaner Mis
6000, 7500 & 8000-Watt Portable Generators 6000, 7500 & 8000-Watt – Gasoline Alternator: – Total harmonic distortion (THD) less than 5% – 100% copper windings Frame: – Heavy-duty powder coated wraparound frame with 1-inch steel tubing – Angled isolator design features four neoprene isolators Components: – Easy-access and protected control panel with magnetic circuit breakers and GFCI-protected receptacles – Large low tone mufflers – Fuel shut-off valve – Easy-to-read fuel gauge – Idle control – Voltmeter/
14000-Watt Portable Generators 14000-Watt – Gasoline Alternator: – Total harmonic distortion (THD) less than 5% – 100% copper windings Frame: – Reinforced 11⁄4-inch powder coated steel tube frame – 13-inch flat-free tires Components: – Easy-access and protected control panel with magnetic circuit breakers and GFCI-protected receptacles – Large low tone mufflers – Easy-to-read fuel gauge – Idle control – Voltmeter/hour meter – Heavy-duty industrial air cleaner Miscellaneous: – USDA/USFS-approved spark arre
6000-Watt Portable Generators 6000-Watt – Diesel Alternator: – Total harmonic distortion (THD) less than 5% – 100% copper windings Frame: – Heavy-duty powder coated wraparound frame with 1-inch steel tubing – Angled isolator design features six neoprene isolators Components: – Easy-access and protected control panel with magnetic circuit breakers and GFCI-protected receptacles – Fuel shut-off valve – Easy-to-read fuel gauge – Voltmeter/hour meter – Heavy-duty industrial air cleaner Limited Warranties: – 2
Finding the Right Generator Portable Generators To select an engine-driven generator, you’ll need to determine the power (kilowatt) requirements that must be met under operating conditions. To determine kilowatts (kW), use the following formula: 1000 Watts = 1 Kilowatt (Ex. 1500 Watts/1000 Watts = 1.
Portable Generator Accessories Wheel Kits For easier portability. AW-5740-0006 (Fits GEN-6000-0MKD) AW-5740-0009 (Fits 5000-watt models) AW-5740-0010 (Fits 6000, 7500 and 8000-watt gasoline models) – Two 10-inch flat-free tires – Dual rubber isolator feet – Powder coated and rubber gripped handles for comfort Lifting Hooks For easier portability.
WET/DRY VACUUMS er o Ca n ist t l a c e D App lying Installing Cartridge Filter Ca ste r In sta llatio n io n m In s u lat a o F g in ll In sta Wir ing of M otor
9-Gallon Wet/Dry Vacuums Motor: – Self-cooling motor design – Quiet operation Components: – Exhaust air ducting reduces the possibility of motor contamination by dirt or moisture – Industrial-grade caster wheels – Wet and dry filter - no conversion necessary Construction: – High impact poly canister Unit Includes: – 10-foot x 11⁄4-inch hose with inlet cuff – 141⁄4-inch curved plastic wand – 2-piece aluminum/plastic extension wand – 12-inch combination floor tool – 81⁄2-inch crevice tool – 12-inch commerci
Wet/Dry Vacuum Accessories 9-Gallon Accessories Suction Hose and Fitting Suction Hose - Bulk 15-0242 – 11⁄4-inch hose without fittings – Sold in 10-foot increments; 50-foot maximum length Inlet Cuff 50-0178 – For bulk hose; to connect to vacuum Inlet cuff, 50-0178 shown on bulk suction hose, 15-0242 Filters Cartridge Filter 19-0221 – For wet or dry applications Paper Filter Bags 19-0222 – 5 per pack – Disposable; for dry use only – Recommended for fine dusts 19-0221 19-0222 Wands Aluminum/Plastic Ex
13 & 18-Gallon Wet/Dry Vacuums Motor: – Self-cooling motor design – Quiet operation Components: – Exhaust air ducting reduces the possibility of motor contamination by dirt or moisture – Industrial-grade polyolefin wheels with stainless-steel shafts – Hydro flow filter for wet and dry applications no conversion necessary – Filter decreases airborne particles through exhaust – Filter efficiency 99.5% to 1.0-micron (Optional HEPA filter 99.97% to 0.
Wet/Dry Vacuum Accessories 13 & 18-Gallon Accessories Suction Hose and Fittings Suction Hose Hose Connector 15-0207 – 10-foot x 11⁄2-inch crushproof hose with fittings 50-0168 – Hose fitting - connects tapered cuff end to hose extension Suction Hose - Bulk Inlet Cuff Fitting Tapered Cuff End 852-0156 – For when you need to add extra hose to your existing suction hose – Includes one hose connector, 50-0168 and one inlet cuff fitting, 50-0169 50-0169 15-0223 – Hose fitting - connects hose to vacuum
13 & 18-Gallon Accessories Wet/Dry Vacuum Accessories Vacuum Bag Liner 19-0235 – Fits inside canister to keep filter cartridge clean – Dry use only - do not use with paper filter bag Aluminum Extension Wand 16-0391 – 2-piece friction fit – Chrome-plated Tools Crevice Tool 33-0326 – 10 3⁄4-inch high impact plastic – Connects directly to hose Upholstery Tool 33-0327 – 5-inch width; serrated edge – High impact plastic – Connects directly to hose Dusting Tool 33-0328 – 2 3⁄4-inch nylon brush – High impact
JOBSITE BOXES B ra ke e P re s s h t n o t he L id Cre ating Jobsite Box in Paint Booth We ld ing ork Fin is h ing W P rep A re a B ef ore Be ing Pa inte d
Heavy-Duty Steel Jobsite Boxes Construction: – Special tamper-proof armored locking system – Convenient swing-out handles – Reinforced support skids – Heavy-duty solid steel construction with full arc welded seams – Full-length concealed hinges are riveted – Special powder coated finish for extreme durability – Predrilled skids for easy caster installation – Optional removable tool trays to assist in tool management and increase your inside storage space MB-3619 Optimize your tool storage and keep them
Jobsite Box Accessories Jobsite Box Accessories Casters Tool Trays Built with heavy-duty components, casters include durable ball bearing wheels for smooth and effortless mobility. Each set includes two swivel and two rigid casters with locks. MX-4 (4-inch) – Rated for 700 lb. MX-5 (5-inch) MX-6 (6-inch) – Rated for 800 lb Help sort and organize your jobsite boxes with tool trays and increase your inside storage space. Offers a convenient transportable tray for jobs when you only need select tools.
PORTABLE HEATERS r ir He ate A d e c r Fo P ropa ne Kerosene Forced Air Heater in Test Room P ropa ne Ta n k - Top He ate r te r d Air He a e c r o F e n Ke ro se P ropa ne Ca bi ne t U ti lity He ate r
Portable Heaters Kerosene Forced Air 75,000 up to 600,000 BTU Motor: – Heavy-duty, high quality cast aluminum enclosed electric motor Burner Head: – 1-piece cast aluminum Components: – High performance fan – Built-in temperature control thermostat with control dial – Integral overheat and flame-out safety – Fuel gauge – Sure start ignition for cold temperature starts – Dual connector ignition Limited Warranty: – 1 year Certification: – CSA Certified - US and Canada Factory Tested for Multiple Fuels: – Ker
Propane Forced Air Portable Heaters 40,000 up to 375,000 BTU Frame: – Heavy-duty steel construction – Easy-lift handle for portability at home or on the jobsite Components: – High performance fan – Automatic shut-off if power is interrupted or flame is extinguished – Enclosed gas controls – Electronic ignition – One-touch ignition and heat control for easy operation Limited Warranty: – 1 year Certifications: – CSA Certified - US and Canada – CSA Blue Star Certified - US Only – CSA Blue Flame Certified - C
Portable Heaters Gas-Fired Convection 50,000 up to 200,000 BTU Frame: – Quick assembly 2-piece burn chamber – Durable steel housing – Inner windshield protects burner flame from being extinguished Heat Output: – Variable heat settings – 360-degree heat radius for even heating of room Components: – Matchless piezo spark ignition – Automatic shut-off if flame is extinguished Limited Warranty: – 1 year Certifications: – CSA Certified - US and Canada – CSA Blue Star Certified - US Only – CSA Blue Flame Certif
Kerosene Radiant Portable Heaters 125,000 BTU Motor: – Fully enclosed motor for longer life Frame: – Compact design – Two tires for easy mobility – Heat safety grille – Easy-lift handle for portability at home or on the jobsite Heat Output: – Adjustable heat height – Clean, quiet, instant radiant heat Components: – Ultra quiet fuel pump – Power switch – Electronic controls – Error indicator light – Integral overheat and flame-out safety – Contractor-grade fuel cap – Easy access filter Limited Warranty: –
Portable Heaters Propane Tank-Top Radiant 9,000 up to 32,000 BTU Frame: – Heavy-duty construction – Rust-proof chrome emitter guard – Rear burner safety guard Heat Output: – Variable heat control valve – Clean, quiet, instant radiant heat Components: – Standard propane tank connection – High efficiency heat reflector – Hand wheel valve connection Limited Warranty: – 1 year Certification: – CSA Certified - US and Canada Important Notes: – Not for use in residential living areas or inadequately ventilated a
Propane Radiant Outdoor Patio Portable Heaters 22,500 up to 40,000 BTU MH-0040-PM10 Frame: – Heavy-duty stainless-steel emitter screen – Rust resistant reflector material – 5-piece reflector assembly – Large diameter support post – Wheel kit for easy maneuverability Heat Output: – Variable heat settings Components: – Wind resistant burner system prevents flame from being extinguished and has automatic shut-off if flame is extinguished – Built-in safety tip-over switch – Piezo spark push-button controls L
Portable Heaters Propane Cabinet Utility 18,000 BTU Frame: – Heavy-duty construction – Cast aluminum manifold – Powder coated cabinet – 4 rolling casters - 2 locking Heat Output: – Clean, quiet, instant radiant heat – Wind resistant burner system – Secured fully insulated ignition connection Components: – Variable heat control knob – No electricity required – Safety auto-extinguish tip over switch – Hose and regulator – Piezo spark ignition – Requires 20-lb.
WATER PUMPS n n sta llatio I r o t o M Testing a WTP-S03-1MGH Impe lle r In st a llatio n n In sta llatio y d o B p Pu m App lying De ca l
Semi-Trash Pumps Water Pumps 2-Inch Frame: – Heavy-duty powder coated wraparound frame with 1-inch steel tubing – Rubber isolators minimize vibration Components: – Silicon carbide mechanical seals – Precision molded cast iron impeller and volute for reduced vibration and wear Limited Warranties: – 1 year Mi-T-M engine – 2 year pump – 3 year Honda engine WTP-S02-1MGH shown with 2-inch suction and discharge kit, 70-0524 Suction and discharge kit, 70-0524 The compact, lightweight and portable Mi-T-M 2-inc
Semi-Trash Pumps Water Pumps 3-Inch Frame: – Heavy-duty powder coated wraparound frame with 1-inch steel tubing – Rubber isolators minimize vibration Components: – Silicon carbide mechanical seals – Precision molded cast iron impeller and volute for reduced vibration and wear Limited Warranties: – 1 year Mi-T-M engine – 2 year pump – 3 year Honda engine WTP-S03-2MGM Suction and discharge kit, 70-0525 Handle unwanted water and debris on any jobsite with the powerful 3-inch semi-trash pumps.
Trash Pumps Water Pumps 3 & 4-Inch Frame: – Heavy-duty powder coated wraparound frame with 1-inch steel tubing – Rubber isolators minimize vibration Components: – Durable silicon carbide mechanical seals – Cast iron impeller and volute for reduced vibration and wear – Die cast aluminum pump is lightweight and portable – The clean-out cover and volute can be removed for easy cleaning of debris Limited Warranties: – 2 year pump – 3 year Honda engine WTP-T03-0MGH shown with 3-inch suction and discharge kit,
Ordering Information Ordering Information Extended Hours To serve you better, our customer service hours of operation are: Monday - Friday 7:30 am to 5:30 pm CST Products may be ordered and inquires may be sent 24 hours a day, 7 days a week via fax or e-mail. How To Order Units and accessories are ordered through authorized Mi-T-M dealers and distributors. - Be prepared to advise the Mi-T-M Customer Service Representative of your Mi-T-M account number, model numbers, parts and descriptions.
Product & Safety Certifications Product & Safety Certifications At Mi-T-M, manufacturing safe and reliable products is a priority. As an accredited CSA testing facility, Mi-T-M conducts a majority of product certification work in-house. To guarantee credibility of the testing standards during Mi-T-M’s certification work, Occupational Safety and Health Administration (OSHA) approved Nationally Recognized Testing Laboratory (NRTL) audits are completed on a regular basis.
Product & Safety Certifications UM U Product & Safety Certifications The International Boiler and Pressure Vessel Code establishes rules of safety governing the design, fabrication and inspection of boilers and pressure vessels, and nuclear power plant components during construction.
Suppliers Thank You To Our Suppliers We would like to take this opportunity to say thank you to our dedicated suppliers. The Mi-T-M brand is very important to us and only the highest quality components are considered for our equipment. We appreciate your commitment and support and look forward to doing business with you for many years to come. With over 90 years of engine innovation, Kohler Engines has earned a reputation for quality and performance. Their extensive product range of 3.
Employees Our Promise We promise to deliver unmatched performance - from the quality of our products to the dedication of each employee who does what’s right for our customer - every time.
Cold & Hot Water Pressure Washers Air Compressors • Portable Generators Air Compressor/Generator Combinations Air Compressor/Generator/Welder Combinations Wet/Dry Vacuums • Jobsite Boxes Portable Heaters • Water Pumps Water Treatment Systems www.mitm.com 50 Mi-T-M Drive • Peosta, IA 52068 • ph 800-553-9053 • fax 563-556-1235 • corp@mitm.