Mi Temperature and Humidity Monitor 2 User Manual Read this manual carefully before use, and retain it for future reference. Product Overview Front Top Ventilation Holes Note: Do not obstruct the ventilation holes when installing or using the monitor. Lanyard Hole Note: To use the lanyard hole, remove the back cover of the monitor first. Display Rear Rear Ventilation Holes Note: Do not obstruct the ventilation holes when installing or using the monitor.
Accessory c. Adhesive Sticker Installation Hanging: Remove the back cover of the monitor, and lead the lanyard's loop through the hole and around the hook. Reinstall the back cover, then hang the monitor. Note: Lanyard is not included and sold separately. Installing the Battery Remove the cover from the cover opening of the monitor, and place a CR2032 battery with the positive (+) side facing upwards, then reinstall the cover. Note: Battery is not included and sold separately.
Symbol Instructions Temperature Less than 19°C Humidity Between 19°C and 27°C More than 27°C Less than 20% Between 20% and 85% More than 85% Open Mi Home/Xiaomi Home app, tap "+" on the upper right, and then follow prompts to add your device. * The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default. Low Battery Notification When the battery is at a low level, this symbol appears on the display.
Mi Temperature and Hu Temperature 33.4 ℃ Humidity 48 % Temperature（℃） 30.1℃ 33.2℃ 31.6℃ Humidity（%） 33.5℃ 29.2℃ Daily Care & Maintenance Note: The monitor can only connect with these devices supporting the function of Mi Bluetooth Gateway. Please contact the customer service for detailed information. Restoring Factory Settings Remove the back cover when the monitor is working normally, and use a conductive material to connect the two contact points above the battery for about 5–8 seconds.
Specifications Name: Mi Temperature and Humidity Monitor 2 Model: LYWSD03MMC Materials: ABS & PMMA Dimensions: 43 × 43 × 12.5 mm Net Weight: 18 g Operating Voltage: DC 2.5–3 V Battery Type: CR2032 (Not included) Wireless Connectivity: Bluetooth 4.2 Bluetooth Low Energy Frequency Range: 2402MHz-2480MHz Temperature Measurement Range: 0°C to 60°C Temperature Accuracy: ± 0.
WARRANTY NOTICE As a Xiaomi consumer, you benefit under certain conditions from additional warranties. Xiaomi offers specific consumer warranty benefits which are in addition to, and not instead of, any legal warranties provided by your national consumer law. The duration not duly manufactured by Xiaomi and/or were not duly acquired from Xiaomi or a Xiaomi’s official seller are not covered by the present warranties.
