User's Manual

Product descriptions
Please read this User Manual carefully before using the product,
and keep it properly.
The product could be installed with various ways:
Screen
Front
Connect to Meawow App
This product is connected to
Meawow App and can be
interconnected with other
products on the App.
Search for Meawow in the
App Store or scan the QR
code to download and install
the Meawow App.
Top vent hole
Installation
Please do not block
the vent hole while
installing and/or
using the product.
Reminder:
Please do not block
the vent hole while
installing and/or
using the product.
Reminder:
Back
Back vent hole
Wall mounting hole
Buon
Baery cover
Baery insulating board
Open the baery cover
and remove the baery
insulation sheet when
using the product for the
first time.
Note:
Accessories
Bracket
Wall mounting
structure
Double-sided
adhesive tape
+
Connect to “Meawow”
When this icon appears on the screen, it
indicates that the baery is low and
must be replaced.
Low baery reminder
Low baery
indicator
Comfort level indicator descriptions
Temperature
<19°C
19°C≤Temperature≤27°C
20%≤Humidity≤85%
Humidity<20%
Humidity>85%
Temperature
>27°C
Temperature
Humidity
LCD Indicators
Max.
Temperature
Min.
Max.
Min.
Comfort level
indicator
°C/°F
Low baery indicator
Connection indicator
Time
Humidity
Using the product together with
bracket: Align the bracket with
the wall mounting hole on the
back of the product and press the
bracket into the mounting hole.
Push it upward. Aer the bracket
is securely connected, put the
product onto a table, bookshelf or
other appropriate flat surface.
Mounting the product onto
walls: Paste the double-sided
adhesive tape onto the surface of
wall mounting structure, remove
the release paper and aach the
other side to the wall surface.
Product name: Bluetooth Hygrothermograph(LCD version)
Model: MHO-C702
FCC ID: 2AWMOMHOC702
Baery: CR2032 buon cell (two installed)
Rated voltage: DC3.0V
Material: ABS
Product dimensions: 88×70×12mm
Product weight: 59g (including baeries)
Temperature measuring range: 0°C-60°C
Temperature display resolution: 0.1°C
Humidity measuring range: 0%-99%RH
Humidity display resolution: 1%RH
Technical parameters
Manufacturer: MeasmartTechnologyINC
Address: 17800CASTLETONSTSTE665，CITYOFINDUSTRY,
California,91748，UnitedStates
For any aer-sales service, please email Meawow via
[e-mail] or visit our official website:
www.meawow.com.
For more information, please follow the facebook page of
Meawow.
Operation manual version: V1.0
1.
2.
3.
4.
5.
Do not immerse the vent holes of the product in water.
Do not forcibly remove the product aer it has been aached
to wall to avoid damaging product or wall surface.
This product is not to be used in environments below 0℃.
Please keep away from environments with high temperatures,
high humidity, and other severe conditions.
The baery that comes packaged with this product is for trial
use only and is not guaranteed to have the same lifespan as a
standard new baery.
This product is meant to be used as an everyday instrument,
not as a measuring tool.
Notices
Cleaning
Please avoid any water from seeping into the product while
cleaning it.
Use a piece of so cloth soaked with neutral detergent to
wipe away dirt on the product surface.
Reminder :All illustrations in the operation manual to present
the product, accessories, user interfaces, etc. are schematic for
reference only. Since our products are constantly updated and
upgraded, actual products may slightly differ from the
schematic illustrations. Actual products shall govern
accordingly.
Operation Manual of
Bluetooth Hygrothermograph
LCD version
We, MeasmartTechnologyINC hereby declare that
this equipment is in full compliance with the
applicable US and European's Directives，European
Norms, and its amendments.
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for
help.
* RF warning for Portable device:
ThedevicehasbeenevaluatedtomeetgeneralRFexposure
requirement.Thedevicecanbeusedinportable exposure
conditionwithoutrestriction.
Add devices
Open Meawow App, click the “Add Sub-device” buon on the
“+” page at the upper right corner or “Smart Gateway” page .
Select “Temperature and Humidity Sensor” on the page of
“Select Device Type”.
Short press the seing buon “ ” 3 times on the back of the
hygrothermograph, and confirm the le icon “ ” on the
screen of temperature and humidity meter is flashing, which
means the device starts the network distribution mode.
Aer the device is successfully added, it can be found in the
“My Home” list.
Smart Linkage
Aer the device is successfully added, click the “Smart Linkage”
module on the main interface of the App device to set the smart
and linkage functions, such as:
Baery replacement
Open the baery cover along the direction marked in the figure.
While keeping the positive electrodes of the two CR2032 buon
baeries facing upward, install them into the baery
compartment by aligning them with the buckle and then close
the baery cover.
Maintenance
Tips: Due to the upgrade and update of App, the actual operation
may be slightly different from the above description. Please
follow the guidance in the current App.
Set it as “Turn on the air conditioner when the ambient
temperature is higher than 32°C”.
* Some smart linkage functions need to be used with other
devices. For more information, please consult the official
customer service.
Set the temperature and humidity comfort zone. When the
ambient conditions are out of the comfort zone, the phone
will send notices and reminders.
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority
to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
FCC Caution.
View Max./Min.
Set time and temperature units
Reminder: If no operation is performed within 10 seconds aer
the numbers start flashing, the product will automatically quit
seing mode and enter normal display mode.
Buons and functions
Set+/Max. -/Min.
Press “+” or “-” buon while in normal display mode. The LCD
will then show the corresponding maximum or minimum
temperature and humidity over the past 24 hours.
Reminder: If no operation is performed within five seconds,
the product will automatically quit View mode and enter
normal display mode.
Press and hold the Set buon “ ”, the number indicating
the hour will start flashing and the product will enter seing
mode.
While in seing mode, corresponding numbers will flash.
Press “+” or “-” buon to change the seings.
Aer seing are completed, press the Set buon “ ” to
turn to the next seing.
说明书
105g金东太空梭
说明书
正面
420
70
87
修改记录：
2021/9/2 v0.1 创建文档。
2021/9/17 V0.2 添加FCC id,修改产品名称.
2021/9/27 v0.3 修改fcc警示语。
2021/10/14 v0.4 添加app qrcode; 修改文案；添加
料号。
v0.4
2021/10/14
PN00W201120
背面
霸王龙涂鸦版_Meawow