Safety data sheet

ManualsBrandsMIBENCO ManualsAdhesivesLiquid rubber coating spray Colour Yellow (glossy) 400 ml

Page 1/8

Safety data sheet

according to 1907/2006/EC, Article 31

Printing date 26.01.2015 Revision: 26.01.2015Version 1

40.0

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1 Product identifier

Trade name: mibenco LIQUID RUBBER SPRAY

1.2 Relevant identified uses of the substance or mixture and uses advised against

Not applicable.

Application of the substance / the preparation:

It is a multifunctional, one-component rubber coating which can be applied by spraying lightly and

quickly. The sprays find their application in the craft and DIY, model construction, automotive sector

as well as in the industry.

Homepage: www.mibenco.com

E-mail: info@mibenco.com

Phone: +49(0)6188-9575-20

+49 (0) 6131-19240 (24h)

1.3 Details of the supplier of the safety data sheet

Manufacturer/ Supplier:

mibenco® gmbh

Am Sportplatz 5

63791 Karlstein

GERMANY

Further information obtainable from: Geschäftsführung

1.4 Emergency telephone number: Poison Control Center Mainz

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture

Classification according to Regulation (EC) No 1272/2008

GHS02 flame

Flam. Aerosol 1 H222-H229 Extremely flammable aerosol. Pressurised container: May burst if

heated.

GHS07

Skin Irrit. 2 H315 Causes skin irritation.

Classification according to Directive 67/548/EEC or Directive 1999/45/EC

Xn; Harmful

R20/21: Harmful by inhalation and in contact with skin.

Xi; Irritant

R38: Irritating to skin.

F+; Extremely flammable

R12: Extremely flammable.

Information concerning particular hazards for human and environment:

The product has to be labelled according to 1272/2008/EC (GHS - Global Harmonized System; CLP

- Classification, Labelling and Packaging in Europe).

Warning! Pressurised container.

Classification system:

The classification is according to the latest editions of the EU-lists, and extended by company and

literature data.

2.2 Label elements

Labelling according to Regulation (EC) No 1272/2008

The product is classified and labelled according to the CLP regulation.

Hazard pictograms

GHS02 GHS07

(Contd. on page 2)

Summary of content (8 pages)

PAGE 1
40.0 Page 1/8 Safety data sheet according to 1907/2006/EC, Article 31 Printing date 26.01.2015 Revision: 26.01.2015 Version 1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifier Trade name: mibenco LIQUID RUBBER SPRAY 1.2 Relevant identified uses of the substance or mixture and uses advised against Not applicable.
PAGE 2
40.0 Page 2/8 Safety data sheet according to 1907/2006/EC, Article 31 Printing date 26.01.2015 Version 1 Revision: 26.01.2015 Trade name: mibenco LIQUID RUBBER SPRAY (Contd. of page 1) Signal word Danger Hazard statements H222-H229 Extremely flammable aerosol. Pressurised container: May burst if heated. H315 Causes skin irritation. Precautionary statements P101 If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children. P103 Read label before use.
PAGE 3
40.0 Page 3/8 Safety data sheet according to 1907/2006/EC, Article 31 Printing date 26.01.2015 Version 1 Revision: 26.01.2015 Trade name: mibenco LIQUID RUBBER SPRAY (Contd. of page 2) After eye contact: Rinse opened eye for several minutes under running water. After swallowing: Rinse out mouth and then drink plenty of water. Do not induce vomiting. 4.2 Most important symptoms and effects, both acute and delayed Erythema 4.
PAGE 4
0.0 Page 4/8 Safety data sheet according to 1907/2006/EC, Article 31 Printing date 26.01.2015 Version 1 Revision: 26.01.2015 Trade name: mibenco LIQUID RUBBER SPRAY (Contd. of page 3) 7.3 Specific end use(s) No further relevant information available. SECTION 8: Exposure controls/personal protection Additional information about design of technical facilities: No further data; see item 7. 8.
PAGE 5
40.0 Page 5/8 Safety data sheet according to 1907/2006/EC, Article 31 Printing date 26.01.2015 Version 1 Revision: 26.01.2015 Trade name: mibenco LIQUID RUBBER SPRAY (Contd. of page 4) to be checked prior to the application. Penetration time of glove material Material layer thickness: ca. 0.7 mm, breakthrough time: > 480 min (Viton) The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
PAGE 6
40.0 Page 6/8 Safety data sheet according to 1907/2006/EC, Article 31 Printing date 26.01.2015 Version 1 Revision: 26.01.2015 Trade name: mibenco LIQUID RUBBER SPRAY (Contd. of page 5) SECTION 10: Stability and reactivity 10.1 Reactivity 10.2 Chemical stability Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications. 10.3 Possibility of hazardous reactions No dangerous reactions known. 10.
PAGE 7
40.0 Page 7/8 Safety data sheet according to 1907/2006/EC, Article 31 Printing date 26.01.2015 Version 1 Revision: 26.01.2015 Trade name: mibenco LIQUID RUBBER SPRAY (Contd. of page 6) 12.3 Bioaccumulative potential No further relevant information available. 12.4 Mobility in soil No further relevant information available.
PAGE 8
40.0 Page 8/8 Safety data sheet according to 1907/2006/EC, Article 31 Printing date 26.01.2015 Version 1 Revision: 26.01.2015 Trade name: mibenco LIQUID RUBBER SPRAY (Contd. of page 7) Transport/Additional information: ADR Limited quantities (LQ) Excepted quantities (EQ) Transport category Tunnel restriction code IMDG Limited quantities (LQ) Excepted quantities (EQ) 1L Code: E0 Not permitted as Excepted Quantity 2 D 1L Code: E0 Not permitted as Excepted Quantity SECTION 15: Regulatory information 15.