User's Manual

10
SENDING THE OUTPUT SIGNAL
TO AN AMPLIFIER
• Connect the 1/8”-to-RCA or 1/8”-to-1/8” cable from
the AUDIO MIXED OUT jack to an available audio input
on the amplifier.
TO A POWERED SPEAKER
• Connect the 1/8”-to-RCA or
1/8”-to-1/8” cable from the AUDIO
MIXED OUT jack into an available
audio input on the powered speaker.
GETTING ONLY MICROPHONE AUDIO
• Connect a 1/4” patch cable (not included)
from the MICROPHONE OUT to an
available Microphone Input jack on either
a mixer or sound system.
Note: Both mic signals will be heard with the
one 1/4” patch connection.
Getting Connected
Amp
(Speakers Not Included)
(Mixer Not Included)
(Amp Not Included)