Instruction manual

28
- The PRO-J and PRO-H operators are equipped with an emergency disconnect device with interlocked power
cut-out switch to manually operate door in case of emergency. This feature should not be used to manually
operate a malfunctioning door.
1. If operator is supplied with standard chain keeper: Pull the disconnect chain through the hole of keyhole
and lock in place by inserting chain in slot of keyhole.
2. If operator is supplied with optional floor level disconnect lever: Pull disconnect lever downwards and lock
in place by bending lever around bracket lip as shown.
3. For PRO-J operators: Move door manually. To return to electrical operation release disconnect chain and allow
to return to original position.
4. For PRO-H operators: Operate door by pulling on hand chain. To return to electrical operation release
disconnect chain and allow to return to original position. Lock hand chain in place (to Chain Keeper or Floor
Level Disconnect) when not in use.
EMERGENCY MANUAL OPERATION
WARNING
TO REDUCE THE RISK OF INJURY OR DEATH:
DO NOT ATTEMPT TO USE EMERGENCY DISCONNECT SYSTEM WHILE
OPERATOR IS RUNNING.
POWER TO THE OPERATOR SHOULD BE TURNED OFF PRIOR TO
OPERATING DOOR MANUALLY.