Instructions / Assembly

Your door knocker was designed for easy mounting
on the surface of your door. The door knocker is
attached to a black mounting bracket which is
screwed directly to your door. The enclosed metal
screws work well with both wood, composite and
metal doors.
To mount your door knocker…
1.
Hold your door knocker in the desired position
on your door and mark the hole locations for the
mounting bracket with a pencil.
2. Drill guide holes 1/2”-3/4” deep using a 1/8” drill
bit. Note that on most designs, you SHOULD NOT
drill holes all the way through the door. Only the
Nantucket Basket, Victorian Urn and the Doctor’s
door knockers require one or two 3/16” holes to
be drilled through your door. In this case the long
brass screw(s) provided go through the door and
screw into the back of the knocker.
3. Some designs require the door knocker to be
removed from the mounting bracket before the
bracket can be attached to your door. Remove the
hinge screw and you can detach the door knocker
from the mounting bracket.
4. Screw the mounting bracket into the desired
position on your door using the enclosed Phillip’s
head screws.
5. If necessary, screw the door knocker to the
mounting bracket once more. Your door knocker
is now ready to provide years of reliable service.
Mounting Instructions
Does my door knocker require special care?
Frequently
Asked Questions
Even though Michael Healy Door Knockers
are coated with a baked polyurethane nish,
copper alloys will patina with time. Age and
the environment may change the appearance
of your door knocker. While some prefer this
natural aging process, our renishing program
gives you the option of restoring your door
knocker to look like new. Call 800-995-0988 or
visit www.michaelhealy.com to inquire about
our renishing program.
What do I do if my door knocker tarnishes?
All Michael Healy Door Knockers receive the
same protective coating. If properly cared for,
there will be no dierence in the durability of
the various nishes.
I live near the beach. Will one nish last longer
than the others?
We coat each door knocker with a clear baked
polyurethane nish. This protective nish is
similar to the clear top coat on an automobile.
Washing your door knocker with a mild soap
and water mixture will help to maintain its
vibrant shine. Occasionally coating the door
knocker with car wax will greatly extend the life
of the original nish. Do not use a brass cleaner
or an abrasive pad as these will damage the
clear coating and the original polished nish.
www.michaelhealy.com
Instructions