Specifications

Radio Programming
MICOM-H Owner’s Guide 46
Setting the Radio
Options
The MICOM-H offers the following programmable radio options:
■
TUNE – Tuner
■
ACC – Accessory
Tuner
The radio can be set to work with or without a tuner. If you are using a tuner, you
must set this option to YES.
To set the tuner on or off:
1.
Access the Radio Options Programming menu:
MENU
>
MORE
>
PROG
(F2) >
RAD
(F1) >
OPTS
(F3).
2.
Press
TUNE
(F1) to access the tuner options.
3.
Press
YES
(F1) to set the tuner option on or
NO
(F2) to set the tuner option off.
4.
Press
ENTER
to confirm.
Accessory Settings
The radio can be set to work with or without a 400W/1KW amplifier.
To set the amplifier option on or off:
1.
Access the Radio Options Programming menu:
MENU
>
MORE
>
PROG
(F2) >
RAD
(F1) >
OPTS
(F3).
2.
Press
ACC
(F2) to access the accessory options.
3.
Press the function key below the option of your choice:
AMP
(F1),
ACC1
(F2),
ACC2
(F3).
Press
NON
(F4) if there is no accessory being used.
4.
Press
ENTER
to confirm.
RADIO
OPTIONS
TUNE ACC
PROG
TUNER – NO
YES NO
Note
ACC1
(F2) and
ACC2
(F3) are for future use.
Selecting these options will have no effect.
RADIO
OPTIONS
TUNE ACC
PROG
ACC – NONE
AMP ACC1 ACC2 NON