User guide

MS-DMT Guide v1.04

Released 05-30-2014

 MARS-ALE Radio Emulation (REM) can be used to facilitate follow on to ALE. ICOM or

KNWDxxx radio types are used with the REM port. The MARS-ALE Radio Emulation

(REM) can also be used in CAT Server Modem to control any make/model radio

selection and PTT type which that software supports that is not directly supported by

the DMT tool.

 Radio CAT Comport defaults settings default to those for the selected radio model

automatically to include any require handshaking. Any baud rate from 1200 to 240,000

is supported, along with framing parameters for user selection. Communication port

support is limited to COM1..COM16 at present.

 At present the M110A ASYNC mode TX/RX data parameters are fixed at 8 data bits, No

Parity, 1 Stop Bit. The M110A SYNC mode is always just 8 data bits with no framing.

 Supports mix and match of sound devices for RX/TX.

 All sound device output and input level settings for the modem are achieved using the

Windows Volume Control Panels at present.

 Provides modem base band modulation adjustment from 30..90% with 75% as the

default.