User guide

MS-DMT Guide v1.04
Released 05-30-2014
89
TRANSMIT PANEL
Buttons
“Inc” - This button increments the data rate.
“Dec” - This button decrements the data rate.
NOTE: 600bps is the default the first time the program is run, it and 300bps are the most commonly
used data rates for MARS-to-MARS use.
“Int’ - This button toggles the Interleaver between SHORT or LONG.
NOTE: The LONG interleave setting is more resistant to channel noise bursts and fades.
NOTE: There is no need for stations to be set to the same Data Rate or Interleave for RX as the 110A
preamble tells all receiving terminals what mode is being sent for automatic configuration. Each side in
two-way exchanges can make use of different data rate and interleave setting with no coordination.