User`s manual

Appendix A: Network Configuration/Router Programming
Belkin (http://www.belkin.com)
F5D6230-3 – Wireless Cable/DSL Gateway Router
1. Log into your router using your router IP.
2. On the main page, select Virtual Server on the left side of the page under the
Securit section.
3. Enter the following information on the page:
Line #1:
Type in the camera’s IP address. (Look on the iGuard IP
Address LCD display for the last 3 digits of the camera’s IP
address)
Private IP:
Private Port: 80
Type: TCP
Public Port: 80
Line #2
Type in the camera’s IP address. (Look on the iGuard IP
Address LCD display for the last 3 digits of the camera’s IP
address)
Private IP:
Private Port: 9001
Type: UDP
Public Port: 9001
4. Click Enter to save the settings. The iGuard should now be configured to work with
your router and be accessible from the internet.
F5D7230-4 – 54g Wireless DSL/Cable gateway Router
1. Log into your router using your router IP.
2. On the main page, select Firewall on the left side of the page.
3. Under Firewall, select Virtual Servers.
4. Enter the following information on the page:
Line #1
Enable: Checked in
Description: iGuard - Webpage
Internet Port: 80 to 80
Type: TCP
Type in the camera’s IP address. (Look on the iGuard Address
LCD display for the last 3 digits of the camera’s IP address)
Private IP address:
71