Specifications
Table Of Contents
- Content
- Welcome!
- Warranty
- 1. Getting Started
- 2. Software Configuration
- 3. Data Capturing
- 3.1. Open Files
- 3.2. Replay of Files
- 3.3. Editing Video Sequences
- 3.4. Saving Files
- 3.4.1. Setting the Recording Frame Rate
- 3.4.2. Setting the Recording Modes
- 3.4.3. Temporary Recording File
- 3.4.4. Saving Radiometric Video Sequences or AVI Files
- 3.4.5. Saving Image Data as Radiometric Snapshot or Text File
- 3.4.6. Saving Text File of the Temperature / Time Diagram
- 3.4.7. Location and Filename Templates of Triggered Recordings
- 3.4.8. Display of Snapshots in a Separate Window
- 3.4.9. Saving Images or Screenshots to Clipboard
- 4. Data Processing
- 5. Visual Camera (TIM200 only)
- Linescanner Mode
- 7. Further Information
thermoIMAGER TIM 22
2.3. Arranging of Thermal Image
The thermal image within the main window of the software can be displayed in various ways using the menu
Tools, Configuration and IR Image arranging.
2.3.1. Mirroring of Displayed Image
Sometimes, depending on the fitting position of the TIM, it is useful to
Mirror the camera image horizontally or vertically. Either the image will be
adjusted by the menu mentioned above or under Tools and Mirror.
2.3.2. Rotation of Displayed Image
By tagging an icon it is possible to Rotate the thermal image into a
different position. Alternatively, a manual adjustment can be done by
defining a User defined angle. The Resulting size of thermal image will
be shown below.
2.3.3. Zooming in Areas of the Displayed Image
Using the Zoom option a defined measure area within the image can be
enlarged in the main window. The option can be activated by tagging
Zoom enabled. The Resulting size of thermal image will be shown
below.