Specifications
Table Of Contents
- Content
- Welcome!
- Warranty
- 1. Getting Started
- 2. Software Configuration
- 3. Data Capturing
- 3.1. Open Files
- 3.2. Replay of Files
- 3.3. Editing Video Sequences
- 3.4. Saving Files
- 3.4.1. Setting the Recording Frame Rate
- 3.4.2. Setting the Recording Modes
- 3.4.3. Temporary Recording File
- 3.4.4. Saving Radiometric Video Sequences or AVI Files
- 3.4.5. Saving Image Data as Radiometric Snapshot or Text File
- 3.4.6. Saving Text File of the Temperature / Time Diagram
- 3.4.7. Location and Filename Templates of Triggered Recordings
- 3.4.8. Display of Snapshots in a Separate Window
- 3.4.9. Saving Images or Screenshots to Clipboard
- 4. Data Processing
- 5. Visual Camera (TIM200 only)
- Linescanner Mode
- 7. Further Information
thermoIMAGER TIM 34
Note
Using the parameter Invisible the software can only be closed via the Task Manager and
Processes.
2.7.2. Start of Multiple Software / Imager Instances
In case you are using more than one TIM simultaneously each imager can be linked to one software instance. In
order to setup a further software instance please follow the steps below:
1.) Duplicate the software icon at the desktop
2.) Change the name of the new software icon at the desktop, e.g. „Imager1“
3.) Option: Change the instance name using the start parameter
. "C:\Program\MICRO-EPSILON GmbH u Co KG\TIM Connect\Imager.exe"
/Name=Imager1
(please see section 2.1.5)
4.) Start the imager using the new software instance
In order to set up the last step please use the menu Tools,
Configuration and Device and select in Application start the
favoured imager for the respective software instance.
Starting the software via the new desktop icon the linked imager will be displayed automatically.
Note
Each imager can be linked to a one software instance only.
