Specifications
Table Of Contents
- Content
- Welcome!
- Warranty
- 1. Getting Started
- 2. Software Configuration
- 3. Data Capturing
- 3.1. Open Files
- 3.2. Replay of Files
- 3.3. Editing Video Sequences
- 3.4. Saving Files
- 3.4.1. Setting the Recording Frame Rate
- 3.4.2. Setting the Recording Modes
- 3.4.3. Temporary Recording File
- 3.4.4. Saving Radiometric Video Sequences or AVI Files
- 3.4.5. Saving Image Data as Radiometric Snapshot or Text File
- 3.4.6. Saving Text File of the Temperature / Time Diagram
- 3.4.7. Location and Filename Templates of Triggered Recordings
- 3.4.8. Display of Snapshots in a Separate Window
- 3.4.9. Saving Images or Screenshots to Clipboard
- 4. Data Processing
- 5. Visual Camera (TIM200 only)
- Linescanner Mode
- 7. Further Information
thermoIMAGER TIM 36
3.2.2. Replay Options
Via the menu Tools, Configuration, Playing and Playing
options you can modify the play rate of recorded video
sequences. This feature ensures that you can replay a video
of a fast process in slow motion in order to analyze it in more
details. Additionally, you can define to replay a recorded
video in a loop (Infinitive loop playing) or to play selection
only. To define a selection the position marks on the time bar needs to be set. All mentioned settings can also
be changed via the control panels below the main window.
Note
The replay settings only refer to the current file shown in the main window. All definitions, however,
can be saved in an individual layout assigned to the file.
The software allows to change measurement parameters
later on. Via the menu Tools, Configuration, Playing and
While playing use this alternative values and settings you
can adjust the parameters Emissivity, Ambient temperature
and Transmissivity to the measurement conditions. Above
that, via Disable recorded reference temperature you can
deactivate reference value stored in the file.
