Specifications
Table Of Contents
- Content
- Welcome!
- Warranty
- 1. Getting Started
- 2. Software Configuration
- 3. Data Capturing
- 3.1. Open Files
- 3.2. Replay of Files
- 3.3. Editing Video Sequences
- 3.4. Saving Files
- 3.4.1. Setting the Recording Frame Rate
- 3.4.2. Setting the Recording Modes
- 3.4.3. Temporary Recording File
- 3.4.4. Saving Radiometric Video Sequences or AVI Files
- 3.4.5. Saving Image Data as Radiometric Snapshot or Text File
- 3.4.6. Saving Text File of the Temperature / Time Diagram
- 3.4.7. Location and Filename Templates of Triggered Recordings
- 3.4.8. Display of Snapshots in a Separate Window
- 3.4.9. Saving Images or Screenshots to Clipboard
- 4. Data Processing
- 5. Visual Camera (TIM200 only)
- Linescanner Mode
- 7. Further Information
thermoIMAGER TIM 47
4. Data Processing
4.1. Measure Areas
4.1.1. General Settings
Measure areas for temperature analysis can be defined, edited and deleted using the menu Tools,
Configuration and Measure areas.
Using New / Delete buttons you can create a new measure area
(measure point / rectangle) or delete existing measure areas.
Press Up / Down to position individual measure areas within the list.
1 measure area from the list can be appointed as the Main measure
area. The temperature of the main area can be displayed in the main
window or converted into an electrical signal to be transmitted via the
Process Interface (PIF)
By selecting Show in image measure areas can be displayed in the
infrared image.
Ticking the Show grippers / Show gripper labels enables you to
change the position or the size of defined measure areas by using the
mouse.
Selecting the option Show name at location you can define the position of the name attached to particularly
measure area (set the position in the drawing).