Specifications
Table Of Contents
- Content
- Welcome!
- Warranty
- 1. Getting Started
- 2. Software Configuration
- 3. Data Capturing
- 3.1. Open Files
- 3.2. Replay of Files
- 3.3. Editing Video Sequences
- 3.4. Saving Files
- 3.4.1. Setting the Recording Frame Rate
- 3.4.2. Setting the Recording Modes
- 3.4.3. Temporary Recording File
- 3.4.4. Saving Radiometric Video Sequences or AVI Files
- 3.4.5. Saving Image Data as Radiometric Snapshot or Text File
- 3.4.6. Saving Text File of the Temperature / Time Diagram
- 3.4.7. Location and Filename Templates of Triggered Recordings
- 3.4.8. Display of Snapshots in a Separate Window
- 3.4.9. Saving Images or Screenshots to Clipboard
- 4. Data Processing
- 5. Visual Camera (TIM200 only)
- Linescanner Mode
- 7. Further Information
thermoIMAGER TIM 52
4.2. Temperature Profile
Up to 2 temperature profiles which graphically reproduce the
temperature development can be generated. The profiles are labeled as
Profile 1 and Profile 2.
The position and size of the profiles can be defined via the coordinates
Begin (P1) and End (P2).
Select Show in image if you want the profiles to be displayed
in the infrared image in the main window. Alternatively, this
setting can be made by choosing the menu View and
Image information (please see section 2.2.3).
The position and size of the profiles can be also defined by dragging the grippers
at the end of the lines within the image of the main window. To do that the option
Show grippers must be chosen. Show gripper labels display coordinate labels
(start point P1 and end point P2).