Specifications
Table Of Contents
- Content
- Welcome!
- Warranty
- 1. Getting Started
- 2. Software Configuration
- 3. Data Capturing
- 3.1. Open Files
- 3.2. Replay of Files
- 3.3. Editing Video Sequences
- 3.4. Saving Files
- 3.4.1. Setting the Recording Frame Rate
- 3.4.2. Setting the Recording Modes
- 3.4.3. Temporary Recording File
- 3.4.4. Saving Radiometric Video Sequences or AVI Files
- 3.4.5. Saving Image Data as Radiometric Snapshot or Text File
- 3.4.6. Saving Text File of the Temperature / Time Diagram
- 3.4.7. Location and Filename Templates of Triggered Recordings
- 3.4.8. Display of Snapshots in a Separate Window
- 3.4.9. Saving Images or Screenshots to Clipboard
- 4. Data Processing
- 5. Visual Camera (TIM200 only)
- Linescanner Mode
- 7. Further Information
thermoIMAGER TIM 54
Use Bind measure areas to profile to assign various measure areas
to a temperature profile. If the position of the profile is changed all
the measure areas will also be moved. The respective profile can be
chosen via the option Assign measure areas to.
Prefix for measure area name enables the individual labeling of
measure areas. The measure area type can be defined under the
Mode options.
Number of measure areas to create as well as the
Width [% of profile length] and Minimum height [pixels] can also
be specified.
Via the Measure mode you can determine the way of displaying the
minimum, maximum or mean temperature in the digital display
window (please see section 2.2.1).
The option Delete existing
mea
sure are
as of this temperature profile eliminates the defined
settings of a profile.
Save the settings by pressing the Create button.
3 rectangles and 3 measure points are
assigned to temperature profile 1 and 2.