Specifications
Table Of Contents
- Content
- Welcome!
- Warranty
- 1. Getting Started
- 2. Software Configuration
- 3. Data Capturing
- 3.1. Open Files
- 3.2. Replay of Files
- 3.3. Editing Video Sequences
- 3.4. Saving Files
- 3.4.1. Setting the Recording Frame Rate
- 3.4.2. Setting the Recording Modes
- 3.4.3. Temporary Recording File
- 3.4.4. Saving Radiometric Video Sequences or AVI Files
- 3.4.5. Saving Image Data as Radiometric Snapshot or Text File
- 3.4.6. Saving Text File of the Temperature / Time Diagram
- 3.4.7. Location and Filename Templates of Triggered Recordings
- 3.4.8. Display of Snapshots in a Separate Window
- 3.4.9. Saving Images or Screenshots to Clipboard
- 4. Data Processing
- 5. Visual Camera (TIM200 only)
- Linescanner Mode
- 7. Further Information
thermoIMAGER TIM 72
6.2. Basic Settings
6.2.1. Linescanner Configuration Menu
All the settings related to the linescanner mode can be done through the Linescanner configuration menu.
You will find the menu under Tools, Linescanner mode and Linescanner settings or as an Icon on the tool
bar.
6.2.2. Choosing the Layout
Before you configure the Linescanner mode a suitable layout (e. g. alignment of application windows) should be
chosen or created. You will find more details in chapter 2.2.
6.2.3. Rotating of the Image
For some application is it of advantage to increase the number of pixels
per line from 160 to 200 by changing the view angle. To do so go to
Rotate menu (see chapter 2.3.2)
According to the chosen angle the camera has to be mounted under
defined angle, too.