Specifications

thermoIMAGER TIM 73
6.2.4. Activating the Linescanner
In order to configure the Linescanner it is necessary to activate the Linescanner mode under Tools,
Linescanner mode and Enable Linescanner or using the Icon on the tool bar.
Note
There are two view options available under Linescanner mode. Linescanner sighting view
is showing
the position of the line and self-trigger area within the infrared image taken by the camera.
Linescanner view
delivers the resulting infrared image based on temperature readings for selected
lines.
6.2.5. Positioning of the Line (Linescanner Sighting View)
The pre-defined position of the line can be seen in the Linescanner sighting view. To access the view go to
Tools, Linescanner mode and Linescanner sighting view or use the Icon provided.
Note
This icon enables to switch between Linescanner sighting view and Linescanner view.
To define the position of the line within the infrared image go to Linescanner
configuration application window (see 6.2.1) in the Source menu. I
n the Lines
taken from source section using First row and Last row field you can specify how
many lines are to be considered during the measurement. Number 1 stands for the
first line from the top in the infrared image.
If more than one line should be taken from the source the Direction menu enables to choose the direction in
which they will be measured and consequently displayed in Linescanner sighting view mode. You can choose