Webcam Model IC435C User’s Manual Before installing device it is recommended that your operating system contain the most recent updates and service packs available. Install the software first before connecting the webcam to your PC. You will be prompted to restart your PC during this installation. Close and save all work before installing this device.
FCC STATEMENT IC435C This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules.
Table of Contents Welcome…………………………………..…………………………………………………………………………..….…. Page 4 Installation Procedures…...………………….………………………………………………..………...………………… Page 5 Using Your Webcam…………………………………………...…………………………………………….…………….. Page 6 Using Your Arcsoft® PhotoImpression………………………………………………………………………………....... Page 7 Capturing Images from “Live” Video…………………………………….………………………………………………... Page 8 Using Arcsoft® VideoImpression …………………..…………………………………………………………………….. Troubleshooting ……………………………………………………………..
Welcome Congratulations on the purchase of your new Webcam. The Webcam is compatible with IBM® or compatible PCs with an available USB port. It is supported by Windows® 98SE, Me, 2000, XP, Vista™.
Installation Procedures During the software installation, you must install the DRIVER. You can install the Arcsoft® PhotoImpression and VideoImpression software at a later time. Frequently check for updated webcam software by visiting our website, www.microinv.com. Turn on your computer. Note: In order for you to use your webcam you must install the software before plugging the webcam into your PC. Insert the CD into your PC and follow the on-screen instructions.
Using Your Webcam To use the camera, click StartÆ ProgramsÆ Micro InnovationsÆ Webcam. Make sure that “Webcam” is checked under the Devices menu and that “Preview” is checked under the Options menu. At this point, you should see “Live” video capture in the window. If you do not please reference the Troubleshooting section in this manual. To Capture “Live” Video Clips (.avi) 1. Click “Capture” and choose “Start Capture” 2. Click “OK” from the “Ready to Capture” window.
Using Arcsoft PhotoImpression Click the Icon on your desktop or click Start Æ Arcsoft PhotoImpression. Note: The Get Photo control panel will be displayed on your screen. • • and select your device to begin downloading your photos. Choose the Camera/ Scanner Icon Using the “View Mode” located in the upper right-hand corner of the applications window, you can view your photos accordingly. Single Photo, Large Thumbnails, Small Thumbnails, Detail mode, or Full Screen. • To sort your photos by Name.
Capturing Images from “Live” Video Click the Icon on your desktop or click Start Æ ProgramsÆ Arcsoft PhotoImpression . From the “Get Photo” control Panel, choose the Video Icon will appear with the following options: for “live” video capture. The “Live” Video capture control panel • Source: allows you to modify the Video Camera capture properties and settings such as Brightness, Hue, Saturation, White Balance, Exposure and Light Frequency.
Using Arcsoft VideoImpression Click this Icon on your desktop or click Start Æ ProgramsÆ Arcsoft Videoimpression. Once the applications is opened, The “getting Started Wizard” will appear. The following options will be available for you to choose from: Open an existing Project – Lets you browse your system for existing project files. These files are not complete movies or slide shows; they are “work-inprogress” files that let you fully edit the components of the storyboard.
Troubleshooting Problem “No capture device found” error “Camera not connected” error Resolution Make sure you have connected the webcam correctly into the USB port or try a different USB port on your PC. There may be a conflict with previous camera/scanner software installed on your PC. You may need to remove the previous software before using this device. Try removing the previous driver and reinstalling the software.
Helpful Hints The following hints will help you achieve the best results with your webcam: Webcam placement • Position the webcam so that the subject is centered. Lighting • Use sufficient lighting. Maintenance • Keep the webcam away from moisture and extreme temperature. • Never use harsh or abrasive cleaners or organic solvents on the webcam or on any of its parts. • Never disassemble or touch the inside of the webcam. Only Micro Innovations may service or repair this device.