Wireless Rechargeable Laser Mouse User’s Manual Model PD7275LSR
FCC STATEMENT PD7275LSR This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules.
Table of Contents FCC Statement…………………………………………………………………………………………………………………….….……………. Page 2 Welcome…………………………………..…………………………………………………………………………………………….……….….. Page 4 Installation Procedures………………………………………………..……………………………………………….………………………….. Page 5 Programming the Buttons…………..……………………………………………………………………………………………………………... Page 6 Troubleshooting...…………………………………………………………………………………………………………………………...……… Page 7 Maintenance and Technical support..…………………………………………………………………….………………..……………...……..
Welcome Congratulations on the purchase of your new Wireless Rechargeable Laser Mouse. The Wireless Rechargeable Laser Mouse is compatible with IBM® and compatible PCs with an available USB port. It is supported by Windows® 98SE, Me, 2000, XP, Vista™. Features and Benefits The RF receiver doubles as a charging cradle when the mouse is not in use and folds for portability. Adjust your mouse’s sensitivity from 800 dpi to 1600 dpi with the touch if one button.
Installation Procedures 1 2 Insert the batteries into the mouse paying close attention to proper polarities. 3 Turn the mouse on using the power switch located underneath the mouse. Turn your PC on. 4 Connect the USB connector of the RF receiver into an available USB port on your PC. 5 Install the software CD. Your new mouse is now ready for use.
Programming the Buttons Click Start ⇒ Programs ⇒ Micro Innovations ⇒ Mouse Suite v1.2. The following icon corner of your computer screen. Click the icon and select the Programmable Button tab.
Troubleshooting Problem Cannot launch Mouse Settings Resolution Try re-installing the software CD. Note: You may need to uninstall any previous mouse software on your PC. Make sure the ON / OFF switch is in the ON position. Restart your PC. Mouse pointer (cursor) moves erratic Batteries may have been consumed (drained). Replace the batteries in your mouse and re-synchronize the mouse with the receiver. RF receiver maybe subjected to interference from other electronic devices.
Maintenance • Maintaining your product will ensure longer life and will minimize the chance of causing damage to your mouse. • Keep all beverages away from the mouse working area and avoid any spills. • Keep the user’s manual for future reference. • Keep the software CD in a safe place for future installations. • Keep the bottom of the mouse clean and free of any dust or film by wiping off the bottom with just a damp soft cloth. • Note this device is dependent on battery current for operation.
