User`s manual
B-17
Intel ICH6R SATA RAID
(2)Select the source disk
Then select the source disk that you wish to use and then click β--->β to
move it to the Selected field. Then click Next to continue.
It is very important to note which disk is the source disk (the one containing all
of the information to be migrated) and which one is the target disk. On a RAID
Ready system, this can be determined by making a note during POST of
which port (e.g. Port 0 or Port 1) the single disk is attached to.
You can also use the Intel Application Accelerator RAID Edition utility before
the second disk is installed to verify the Port and serial number of the drive
that contains all the data.
9625v1.0-Appendix B(ICH6R SATA RAID).p65 2005/8/4, δΈε 02:4317