User`s manual

2-16

MS-9625 M-ATX Workstation Board

Chassis Intrusion Switch Connector: JCI1

This connector is connected to a 2-pin chassis switch. If the chassis is opened, the

switch will be short. The system will record this status and show a warning mes-

sage on the screen. To clear the warning, you must enter the BIOS utility and clear the

record.

Front Panel Connector: JFP1

The mainboard provides one front panel connector for electrical connection to the

front panel switches and LEDs. The JFP1 is compliant with Intel

Front Panel I/O

Connectivity Design Guide.

CD-In Connector: JCD1

The connector is for CD-ROM audio connector.

JCD1

GND

JCI1

JFP1

HDD

LED

Reset

Switch

Power

LED

Power

Switch

PIN SIGNAL DESCRIPTION

1 HD_LED_P Hard disk LED pull-up

2 FP PWR/SLP MSG LED pull-up

3 HD_LED_N Hard disk active LED

4 FP PWR/SLP MSG LED pull-up

5 RST_SW_N Reset Switch low reference pull-down to GND

6 PWR_SW_P Power Switch high reference pull-up

7 RST_SW_P Reset Switch high reference pull-up

8 PWR_SW_N Power Switch low reference pull-down to GND

9 RSVD_DNU Reserved. Do not use.

JFP1 Pin Definition