User`s manual

2-19

Hardware Setup

The motherboard provides the following jumpers for you to set the computer’s function.

This section will explain how to change your motherboard’s function through the use

of jumpers.

Jumper

MSI Reminds You...

You can clear CMOS by shorting 2-3 pin while the system is off. Then

return to 1-2 pin position. Avoid clearing the CMOS while the system is

on; it will damage the mainboard.

Clear CMOS Jumper: CLR_CMOS1

There is a CMOS RAM on board that has a power supply from external battery to keep

the data of system configuration. With the CMOS RAM, the system can automatically

boot OS every time it is turned on. If you want to clear the system configuration, use

this jumper to clear data.

CLR_CMOS1

Clear DataKeep Data