User`s manual

2-21

Hardware Setup

GMCH Voltage Jumper: J3

This jumper is used to adjust the voltage of the Intel 915GM GMCH (Graphics and

Memory Controller Hub) as a way to enhance graphics performance.

} 1.05V for add-on VGA card

} 1.05V for onboard Intel 915GM

GMCH (lower performance)

Short Pin #1-2

(1.05V)

Short Pin #2-3

(Auto Detect)

} 1.05V for add-on VGA card

} 1.5V for onboard Intel 915GM

GMCH (higher performance)

CPU VCCA Jumper: J6

This jumper controls the CPU VCCA supply voltage.

VCCA = 1.5VVCCA = 1.8V