User`s manual

B-2
MS-9625 M-ATX Workstation Board
BIOS Configuration
The Intel RAID Option ROM should be integrated with the system BIOS on all
motherboards with a supported Intel chipset. The Intel RAID Option ROM is the Intel
RAID implementation and provides BIOS and DOS disk services. Please use <Ctrl> +
<I> keys to enter the “Intel(R) RAID for Serial ATA” status screen, which should
appear early in system boot-up, during the POST (Power-On Self Test). Also, you
need to enable the RAID function in BIOS (please to P.3-14 items Onboard RAID
control <Enhanced> & Configure SATA as <RAID> for details) to create, delete
and reset RAID volumes.
After the above message shows, press <Ctrl> and <I> keys simultaneously to enter
the RAID Configuration Utility.
Using the Intel RAID Option ROM
1. Creating, Deleting and Resetting RAID Volumes:
The Serial ATA RAID volume may be configured using the RAID Configuration utility
stored within the Intel RAID Option ROM. During the Power-On Self Test (POST), the
following message will appear for a few seconds:
MSI Reminds You...
The “Driver Model”, “Serial #” and “Size” in the following example
might be different from your system.
MSI Reminds You...
The following procedure is only available with a newly-built system or
if you are reinstalling your OS. It should not be used to migrate an
existing system to RAID 0 or RAID 1.
9625v1.0-Appendix B(ICH6R SATA RAID).p65 2005/8/4, 下午 02:432