CHAPTER 1 Preface
1-2 Preface Table of Content Preface Table of Content ............................................................................................................................ 1-2 Regulations Information............................................................................................................... 1-5 FCC-B Radio Frequency Interference Statement .................................................................... 1-5 FCC Conditions ........................................................
1-3 Preface Rear Side View....................................................................................................................... 2-20 Bottom Side View ................................................................................................................... 2-21 Getting Started Power Management ...................................................................................................................... 3-2 ECO Function ....................................................
1-4 Preface BIOS Setup About BIOS Setup......................................................................................................................... 4-2 When to Use BIOS Setup......................................................................................................... 4-2 How to Run BIOS Setup........................................................................................................... 4-2 Control Keys ....................................................................
1-5 Preface Regulations Information FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
1-6 Preface Shield interface cables and AC power cord, if any, must be used in order to comply with the emission limits. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation.
1-7 Preface Safety Instructions Read the safety instructions carefully and thoroughly. Keep the User’s Guide that All cautions and warnings on the comes with the package for equipment or user’s manual future reference. should be noted. Keep this equipment away from Lay this equipment on a stable humidity and high temperature. surface before setting it up. The openings on the enclosure are used for air convection and to prevent the equipment from overheating. Do not cover the openings.
1-8 Preface Place the power cord in a way that people are unlikely to step on it. Do not place anything on top of the power cord. Always unplug the power cord before inserting any add-on card or module. To prevent explosion caused by When installing the coaxial cable improper battery replacement, to the TV Tuner, it is necessary use the same or equivalent type to ensure that the metal shield is of battery recommended by the reliable connected to protective manufacturer only.
1-9 Preface Safety Guideline for Using Lithium Battery (English) CAUTION: Danger of explosion if battery is incorrectly replaced. recommended by the equipment manufacturer. Replace only with the same or equivalent type Discard used batteries according to manufacturer’s instructions. (French) (Français) ATTENTION: II y a danger d’ex;losion s’il y a remplacement incorrect de la batterie. uniquement avec une batterie du meme type ou d’un type équivalent recommandé par le constructeur.
1-10 Preface üreticinin talimatlarına göre degerlendiriniz. (Greek) (Ελληνικά) ΠΡΟΣΟΧΗ: Κίνδυνος έκρηξης εάν η μπαταρία τοποθετηθεί λανθασμένα. Να αντικαθιστάτε μόνο με τον ίδιο ή αντίστοιχο τύπο με αυτό που συνιστά ο κατασκευαστής του εξοπλισμού. Να απορρίπτετε τις χρησιμοποιημένες μπαταρίες ως απορρίμματα σύμφωνα με τις οδηγίες του κατασκευαστή. (Polish) (Polski) OSTRZEŻENIE: Nieprawidłowa wymiana może spowodować eksplozję baterii.
1-11 Preface 권장하는 것과 동일하거나 동등한 배터리로만 교체하십시오. 사용한 배터리는 제조업체의 지침에 따라 폐기하십시오. (Vietnamese) (Tieng Viet) LƯU Ý: Thay thế pin không tương thích có thể dẫn đến nguy cơ bị nổ. Chỉ thay thế bằng pin cùng loại hoặc loại tương ứng khuyên dùng bởi nhà sản xuất thiết bị. Vứt bỏ pin đã sử dụng theo hướng dẫn của nhà sản xuất.
1-12 Preface utilizadas de acordo com as instruções do fabricante. (Swedish) (Svenska) VARNING: Explosionsfara vid felaktigt batteribyte. typ som rekommenderas av apparattillverkaren. Använd samma batterityp eller en ekvivalent Kassera använt batteri enligt fabrikantens instruction. (Finnish) (Suomi) VAROITUS: Paristo voi räjähtää, jos se on virheellisesti asennettu. valmistajan suosittelemaan tyyppiin. Vaihda paristo ainoastaan Hävitä käytetty paristo valmistajan ohjeiden mukaisesti.
1-13 Preface proizvođača. (Estonian) (Eesti) ETTEVAATUST! Plahvatusoht, kui aku on valesti paigaldatud. Asendage ainult sama või tootja poolt soovitatud võrdväärse akuga. Hävitage kasutatud aku vastavalt tootja juhistele. (( )ﻓﺎرﺳﻲPersian) ﺗﻨﻬﺎ از ﺑﺎﺗﺮﻳﻬﺎﯼ ﭘﻴﺸﻨﻬﺎدﯼ ﺷﺮﮐﺖ ﺗﻮﻟﻴﺪ ﮐﻨﻨﺪﻩ، در ﺻﻮرت ﺗﻌﻮﻳﺾ ﺑﺎﺗﺮﯼ. اﺣﺘﻤﺎل اﻧﻔﺠﺎر ﺑﺎﺗﺮﯼ وﺟﻮد دارد، در ﺻﻮرت ﻋﺪم ﻧﺼﺐ و ﺟﺎ ﮔﺬارﯼ ﺻﺤﻴﺢ ﺑﺎﺗﺮﯼ:اﺧﻄﺎر . از دور اﻧﺪاﺧﺘﻦ ﺑﺎﺗﺮﯼ ﺧﻮددارﯼ ﮐﻨﻴﺪ و ﺑﺮ ﻃﺒﻖ راهﻨﻤﺎﻳﯽ ﺷﺮﮐﺖ ﺗﻮﻟﻴﺪ ﮐﻨﻨﺪﻩ ﻋﻤﻞ ﻧﻤﺎﻳﻴﺪ.
1-14 Preface seront obligés de récupérer certains produits en fin de vie. (German) (Deutsch) Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen Elektro- und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden, die sich auf 13.August, 2005 wirken. Und der Hersteller von bedeckt Elektronik-Altgeräte gesetzlich zur gebrachten Produkte am Ende seines Baruchbarkeitsdauer zurückzunehmen.
1-15 Preface yükümlü olacaktır. (Greek) (Ελληνικά) Σύμφωνα με την Οδηγία 2002/96/ΕΚ της Ευρωπαϊκής Ένωσης («ΕΕ») περί Απόρριψης Ηλεκτρικού και Ηλεκτρονικού Εξοπλισμού (WEEE), η οποία λαμβάνει ισχύ στις 13 Αυγούστου 2005, τα προϊόντα «ηλεκτρικού και ηλεκτρονικού εξοπλισμού» δεν είναι δυνατόν να απορριφθούν πλέον ως κοινά απορρίμματα και οι κατασκευαστές κεκαλυμμένου ηλεκτρονικού εξοπλισμού είναι υποχρεωμένοι να πάρουν πίσω αυτά τα προϊόντα στο τέλος της ωφέλιμης ζωής τους.
1-16 Preface (Simplified Chinese ) (简体中文) 欧盟已制订有关废电机电子设备法令,亦即自 2005 年 8 月 13 日生效的 2002/96/EC,明 文规定「电机电子设备产品」不可再以都市废弃物处理,且所有相关电子设备制造商,均须在产品使用寿命结束后进行回 收。 (Japanese) (日本語) 2005 年 8 月 13 日以降に EU 加盟国を流通する電気・電子製品には WEEE 指令によりゴミ箱に×印のリサ イクルマークの表示が義務づけられており、廃棄物として捨てることの禁止とリサイクルが義務づけられています。 (Korean) (한국어) 2005 년 8 월 13 일자로 시행된 폐전기전자제품에 대한 유럽연합("EU") 지침, 지침 2002/96/EC 에 의거하여, "전기전자제품"은 일반 쓰레기로 폐기할 수 없으며 제품의 수명이 다하면 해당 전자제품의 제조업체가 이러한 제품을 회수할 책임이 있습니다.
1-17 Preface (Serbian) (Srpski) Po Direktivi Evropske unije ("EU") o odbačenoj ekektronskoj i električnoj opremi, Direktiva 2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju pod "elektronsku i električnu opremu" ne mogu više biti odbačeni kao običan otpad i proizvođači ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog uobičajenog veka trajanja.
1-18 Preface direktiivin 2002/96/EY mukaisesti ”sähkö- ja elektroniikkalaitteita” ei saa enää hävittää talousjätteiden mukana. Direktiivin alaisen sähkö- tai elektroniikkalaitteen valmistajan on otettava laitteet takaisin niiden käyttöiän päättyessä. (Slovak) (Slovenčina) Na základe smernice Európskej únie („EU“) o elektrických a elektronických zariadeniach číslo 2002/96/ES, ktorá vstúpila do platnosti 13.
1-19 Preface задължени да приемат обратно съответните продукти в края на експлоатационния им период. (Croatian) (Hrvatski) U okviru Direktive Europske Unije ("EU") o Otpadnim električnim i elektroničkim uređajima, Direktiva 2002/96/EC, koja je na snazi od 13. kolovoza 2005., "električni i elektronički uređaji" se ne smiju više bacati zajedno s kućnim otpadom i proizvođači su obvezni zbrinuti takve proizvode na kraju njihovog životnog vijeka.
1-20 Preface Trademarks All trademarks are the properties of their respective owners. Release History Version Revision Note Date 1.
CHAPTER 2 Introductions
2-2 Introductions Congratulations on becoming a user of this notebook, the finely designed notebook. This brand-new exquisite notebook will give you a delightful and professional experience in using notebook. We are proud to tell our users that this notebook is thoroughly tested and certified by our reputation for unsurpassed dependability and customer satisfaction. Manual Map This User’s Manual provides instructions and illustrations on how to operate this notebook.
2-3 Introductions Chapter 4, BIOS Setup, provides information on BIOS Setup program and allows you to configure the system for optimum use. Unpacking First, unpack the shipping carton and check all items carefully. If any item contained is damaged or missing, please contact your local dealer immediately. Also, keep the box and packing materials in case you need to ship the unit in the future.
2-4 Introductions Specification Physical Characteristic Dimension 295.5 (W) x 193 (D) x 32 (H) mm (with 3 cell battery) 295.5 (W) x 193 (D) x 41 (H) mm (with 6 cell battery) Weight 1.4 kg (with 3 cell battery) CPU Processor Type AMD® Yukon MV40/ AMD® Yukon L335 L2 Cache 512KB FSB Speed 800 MHz Special Notification The actual processor preinstalled in the notebook depends on the model you purchased. Please contact the local dealer for detailed information.
2-5 Introductions Maximum 2GB Power AC Adapter 40W, 20V/ 40W, 19V/ 65W, 19V Battery Type 3 cells (optional) RTC Battery Yes Special Notification The actual battery pack that comes with the package may vary 6 cells (optional) without notice. Storage (Items listed here may vary without notice) HDD form factor 2.5”, 9.5 mm High, SATA Special Notification The actual HDD preinstalled in the notebook depends on the model you purchased. I/O Port Monitor (VGA) 15 pin D-Sub x 1 USB USB 2.
2-6 Introductions The supported memory cards may vary without notice. TV-Tuner Antenna Connector x 1 (optional) Communication Port (Items listed here may vary without notice) LAN 10/100/1000 Ethernet Wireless LAN Support Bluetooth Support (optional) 3.5G Support (optional) Display LCD Type 12.1" 1366x768 (optional) Brightness Brightness controlled by K/B hot-keys 11.
2-7 Introductions Audio Sound Controller Realtek® ALC 888S-VC2-GR Internal Speaker 2 speakers with housing Sound Volume Adjust by K/B hot-key & SW Software & BIOS USB Flash Boot Yes, USB floppy boot up DOS only BIOS Fast Boot Support --- Yes Others Compliance WHQL Kensington Lock Hole x1
2-8 Introductions Upgrade and Warranty Please be noticed that the memory, hard disk drive, optical storage drive, and battery pack preinstalled in the product users purchased may be upgradable or replaceable by user’s request. To learn more about upgrade limitation, please refer to the specification in the User’s Manual. For any further information about the product users purchased, please contact the local dealer.
2-9 Introductions Product Overview This section provides the description of basic aspects of the notebook. It will help you to know more about the appearance of this notebook before using it. Please be aware that the notebook shown in this section may vary from the actual one that users purchased. Top-open View The figure of top-open view and description shown below will lead you to browse the main operating area of your notebook. 1 5 1. WebCam 2. Power Button / Power LED 3. Keyboard 4.
2-10 Introductions 1. Webcam/ Webcam LED This built-in Webcam can be used for picture taking, video recoding or conferencing, and any other interactive applications. Webcam LED indicator, next to the webcam, grows orange when webcam function is activated; LED goes out when this function is turned off. 2. Power Button / Power LED Power Button Press the power button to turn the notebook power ON and OFF. Power/ ECO Engine LED: Glowing blue when the notebook power is turned on.
2-11 Introductions display to learn the Webcam function status. Press and hold the Fn button, and then press the F5 button to turn + ECO Engine (optional) (Power Saving) the ECO Engine function on. Refer to the Power Management section in chapter 3 of this manual for the detailed information of this ECO function. Press and hold the Fn button, and then press the F8 button to turn + Wireless LAN(WiFi) the Wireless LAN (WiFi) function on. Press again to turn it off.
2-12 Introductions the F10 button repeatedly. Press and hold the Fn button, and then press the F4 button to turn the windows search function on. Press again to turn it off. + P1 4. Read the icon on behalf of the P1 function appearing on the display to learn the function status. Touchpad This is a pointing device of the notebook. 5. Internal Microphone There is built-in microphone and its function is the same with microphone.
2-13 Introductions Front Side View 1 1. Status LED 1. Status LED Bluetooth: Bluetooth Glowing blue when Bluetooth function is activated. Power On/ Off/ Suspend: Glowing blue when the system is activated. Blinking blue when the system is in suspend mode. LED goes out when the system is turned off. Battery: Glowing yellow green when the battery is being charged. Glowing amber when the battery is in low battery status.
2-14 Introductions type of battery recommended by the manufacturer. Battery LED goes out when it is fully charged or when the AC adapter is disconnected. Wireless LAN and 3G: Glowing blue when wireless LAN function is enabled. Glowing yellow green when 3G function is enabled. Wireless LAN and 3G LED goes out when all functions are disabled. Note: For flight safety consideration, make sure this LED goes out when you are in flight.
2-15 Introductions Right Side View 1. 1 6 2 2 3 4 5 Audio Port Connectors 2. USB Port 3. Card Reader 4. RJ-45 Connector 5. Kensington Lock 6. TV Tuner Antenna Connector (optional) 1. Audio Port Connectors Make high quality sound blaster with stereo system and Hi-Fi function supported. Mic-in: Used for an external microphone. Headphone-out: A connector for speakers or headphones.
2-16 Introductions Headphone-out: A connector for speakers or headphones. 2. USB Port The USB 2.0 port allows you to connect USB-interface peripheral devices, such as the mouse, keyboard, modem, portable hard disk module, printer and more. 3. Card Reader The built-in card reader may support various types of memory card, such as MMC (Multi-Media Card), XD (eXtreme Digital), SD (Secure Digital), MS (Memory Stick) cards.
2-17 Introductions 6. TV-Tuner Antenna Connector (Optional) Notebook with Analog TV tuner — plug the supplied TV-Tuner adaptor into the connector first, and then screw the TV cable at the other end of adaptor. Notebook with Digital TV tuner — simply plug the supplied TV Antenna into the connector.
2-18 Introductions Left Side View 5 4 3 2 1 1. USB Port 2. HDMI Connector 3. Ventilator 4. VGA Port 5. Power Connector 1. USB Port The USB 2.0 port allows you to connect USB-interface peripheral devices, such as the mouse, keyboard, modem, portable hard disk module, printer and more. 2.
2-19 Introductions 4. VGA Port The 15-pin-D-sub VGA port allows you to connect an external monitor or other standard VGA-compatible device (such as a projector) for a great view of the computer display. 5. Power Connector To connect the AC adapter and supply power for the notebook.
2-20 Introductions Rear Side View 1 1. Battery Pack 1. Battery Pack This notebook will be powered by the battery pack when the AC adapter is disconnected.
2-21 Introductions Bottom Side View 3 2 1 1. 4 5 Battery Lock/ Unlock Button 2. Battery Pack 3. Battery Release Button 4. Ventilator 5. Stereo Speakers 5 1. Battery Lock/ Unlock Button Battery cannot be moved when the button is positioned on lock status. Once the button is slid to unlock position, the battery is removable. 2. Battery Pack This notebook will be powered by the battery pack when the AC adapter is disconnected.
2-22 Introductions 3. Battery Release Button It is a bounce-back device as a preparation for releasing the battery pack. Slide it with one hand and pull the battery pack carefully with the other. 4. Ventilator The ventilator is designed to cool the system. DO NOT block the ventilator for air circulation. 5. Stereo Speakers Give high quality sound blaster with stereo system and Hi-Fi function supported.
CHAPTER 3 Getting Started
3-2 Getting Started Power Management ECO Function While the AC power is disconnected, read the instructions bellow to activate the ECO function under battery mode: 1. Press and hold the Fn button. 2. Press the F5 button ( ) repeatedly to enable/disable the ECO function. 3. Read the icon on behalf of the ECO function appearing on the display to learn ECO function status. Display Panel Brightness Showing the brightness level of the display panel, there are eight levels for you to choose.
3-3 Getting Started ECO function Status Showing the ON/OFF status of ECO function. ECO on ECO off As you press the SCM icon on the right-down toolbar, there are four different pop-up windows when P1/ECO function is enabled or disabled: 1. ECO function is activated but P1 function is not set. 2. ECO function is activated and P1 function is set.
3-4 Getting Started 3. ECO function is not activated and P1 function is not set. 4. ECO function is not activated but P1 function is set.
3-5 Getting Started When you select “ECO Setting” and double click it, then you will bring the following list: (The following list will vary depends on which function you use. For example, 3G/TV Tuner won’t appear in the same time. ) (Photo1/Photo2) Photo 1 Photo 2 Photo 3 Please select the item as you want to disable any function in this list, then the function will not work when you turn on the ECO function next time.
3-6 Getting Started AC Adapter Please be noted that it is strongly recommended to connect the AC adapter and use the AC power while using this notebook for the first time. When the AC adapter is connected, the battery is being charged immediately. Note that the AC adapter included in the package is approved for your notebook; using other adapter model may damage either the notebook or other devices attached to it. Connecting the AC Power 1. Unpack the package to find the AC adapter and power cord. 2.
3-7 Getting Started
3-8 Getting Started Battery Pack This notebook is equipped with a high-capacity Li-ion battery pack. The rechargeable Li-ion battery pack is an internal power source of the notebook. Be aware of that this battery pack may be damaged if users try to disassemble the battery pack on their own. Also, note that the limited warranty to the battery pack may also lose its efficacy when this battery pack is disassembled not by an authorized machinist.
3-9 Getting Started Releasing the Battery Pack It is always recommended to have another battery in reserve for enough power supply. Please contact your local dealer to buy a battery pack that is compliant to your notebook. To remove the battery pack, following the steps below: 1. Make sure the notebook is turned off, and 2 the AC power is disconnected. 2. Press the lock/unlock button in the unlocked position. 3. Locate the battery release button on the bottom side. 4.
3-10 Getting Started Replacing the Battery Pack To insert the battery pack, following the steps below: 1. Use both hands to align and insert the battery pack into the compartment with correct orientation. 1 2 2. Slightly slide and press the battery pack into the right position until the battery back is fastened in the compartment. 3 3. Press the lock/unlock button to the Lock position.
3-11 Getting Started Using the Battery Pack Battery Safety Tips Replacing or handling the battery incorrectly may present a risk of fire or explosion, which could cause serious injury. Only replace the main battery pack with the same or equivalent type of battery. Do not disassemble, short-circuit or incinerate batteries or store them to temperatures above +60° C (+140° F). Do not temper with batteries. Keep away from the reach of children. Do not use rusty or damaged batteries.
3-12 Getting Started Charging the Battery Pack The battery pack can be recharged while it is installed in the notebook. Please pay attention to the following tips before recharging the battery: If a charged battery pack is not available, save your work and close all running programs and shut down the system or Save-to-Disk. Plug in an external AC/DC power source. You can use the system, suspend system operation or shut down and turn off the system without interrupting the charging process.
3-13 Getting Started Basic Operations If you are a beginner to the notebook, please read the following instructions to assure your own safety, and make yourself comfortable during the operations. Safety and Comfort Tips The notebook is a portable platform that allows you to work anywhere. However, choosing a good workspace is important if you have to work with your notebook for a long period of time. Your work area should have enough illumination.
3-14 Getting Started 4 1. Keep your hands and feet with optimal comfort. 2. Adjust the angle and position of 1 2 LCD panel. 3. Adjust the desk’s height. 4. Sit straight and keep a good posture. 3 1 5. Adjust the chair’s height. 5 Having a Good Work Habit Have a good work habit is important if you have to work with your notebook for long periods of time; otherwise, it may cause discomfort or injury to you. Please keep the following tips in mind when operating. Change your posture frequently.
3-15 Getting Started Knowing the Keyboard This notebook provides a full-functioned keyboard. This keyboard can be divided into four categories: Typewriter keys, Cursor keys, Numeric keys and Function keys. Typewriter keys Numeric keys The keyboard shown here Cursor keys / may vary from the actual Function keys one, depending on which county users purchase the notebook.
3-16 Getting Started Typewriter Keys In addition to providing the major function of the keyboard, these typewrite keys also provide several keys for special purposes, such as [Ctrl,] [Alt,] and [Esc] key. When the lock keys are pressed, the corresponding LEDs will light up to indicate their status: Num Lock: Press and hold the [Fn] key and press this key to toggle the Num Lock on and off. When this function is activated, you can use the numeric keys that are embedded in the typewriter keys.
3-17 Getting Started Cursor Keys The four cursor (arrow) keys and [Home], [PgUp], [PgDn], [End] keys are used to control the cursor movement. Move the cursor left for one space. Move the cursor right for one space. Move the cursor up for one line. Move to the previous page. Move to the next page. Move to the beginning of the line (or document). Move the cursor down for one Move to the end of the line (or line. document).
3-18 Getting Started Function Keys Windows Keys You can find the Windows Logo key ( ) and one Application Logo key ( ) on the keyboard, which are used to perform Windows-specific functions, such as opening the Start menu and launching the shortcut menu. For more information of the two keys, please refer to your Windows manual or online help. [Fn] Key Switch the display output mode Decrease the built-in speaker’s between + + the LCD, external monitor and both. + volume.
3-19 Getting Started Knowing the Touchpad The touchpad integrated in your notebook is a pointing device that is compatible with standard mouse, allowing you to control the notebook by pointing the location of the cursor on the screen and making selection with its two buttons. 1. Cursor Movement Area This pressure-sensitive area of the touchpad, allows you to place your finger on and control the cursor on the screen by moving one of your finger. 1 2.
3-20 Getting Started Using the Touchpad Read the following description to learn how to use the touchpad: Configuring the Touchpad You can customize the pointing device to meet your personal needs. For example, if you are a left-handed user, you may want to swap the functions of the two buttons. In addition, you can change the size, shape, moving speed and other advanced features of the cursor on the screen.
3-21 Getting Started that your each tap on the touchpad is equivalent to pressing the left button. Tapping twice more rapidly on the touchpad is to execute a double-click. Drag and Drop You can move files or objects in your notebook by using drag-and-drop. To do so, place the cursor on the desired item and slightly tap twice on the touchpad, and then keep your fingertip in contact with the touchpad on the second tap.
3-22 Getting Started About Hard Disk Drive Your notebook is equipped with a 2.5-inch hard disk drive. The hard disk drive is a storage device with much higher speed and larger capacity than other storage devices, such as the floppy disk drive and optical storage device. Therefore, it is usually used to install the operating system and software applications. To avoid unexpected data loss in your system, please backup your critical files regularly.
3-23 Getting Started Connecting the External Devices The I/O (input/output) ports on the notebook allow you to connect peripheral devices. All devices listed here are for reference only. Connecting the Peripheral Devices Connecting the USB devices This notebook provides USB ports for connecting various USB devices, such as mouse, keyboard, digital camera, webcam, printer, and external optical storage device, ete..
3-24 Getting Started Connecting the External Display Devices This notebook provides a VGA port for connecting a larger display with higher resolution. The 15-pin-D-sub VGA port allows users to connect an external monitor or other standard VGA-compatible device (such as a projector) for a great view of the notebook display.
3-25 Getting Started This notebook provides a HDMI port (optional) for connecting a larger display with higher resolution. HDMI (High Definition Multimedia Interface Support) is a new interface standard for PCs, displays and consumer electronics devices that supports standard, enhanced and high-definition video, plus multi-channel digital audio on a single cable. Once the display is connected to the notebook, power on the notebook and the external display should respond by default.
3-26 Getting Started Connecting the Communication Devices Using the LAN The RJ-45 connector of the notebook allows you to connect the LAN (local area network) devices, such as a hub, switch and gateway, to build a network connection. For more instructions or detailed steps on connecting to the LAN, please ask your MIS staff or network manager for help.
3-27 Getting Started Safely Remove Hardware When any peripheral device is connected to the notebook, the Safely Remove Hardware icon will appear on the taskbar. Double-click the icon to bring up the Safely Remove Hardware dialog box. You can see all connected peripheral devices here. If you want to remove any of the devices, move the cursor to the device and click Stop. The diagram shown below is for reference only. Safely Remove Hardware Select the device you want to unplug or eject, and then click Stop.
CHAPTER 4 BIOS Setup
4-2 BIOS Setup About BIOS Setup When to Use BIOS Setup? You may need to run the BIOS Setup when: An error message appears on the screen during the system booting up and is requested to run SETUP. You want to change the default settings for customized features. You want to reload the default BIOS settings. How to Run BIOS Setup? To run the BIOS Setup Utility, turn on the notebook and press the [Del] key during the POST procedure.
4-3 BIOS Setup Control Keys You can use only the keyboard to control the cursor in the BIOS Setup Utility. Press left arrow to select one Press right arrow to select one menu title. menu title. Press up arrow to select one item Press down arrow to select one under the menu title. item under the menu title. + Increase the setting value or make changes. Decrease the setting value or make changes. 1) Open the selected item to change setting options. 2) Bring up a sub-menu when available.
4-4 BIOS Setup BIOS Setup Menu Once you enter the BIOS Setup Utility, the Main Menu will appear on the screen. Select the tags to enter the other menus. Main Menu Show system overview information about BIOS version, CPU features, memory size and setting of system time and date. Advanced Menu Adjust the advanced settings, such as power consumption, USB/ PCI devices, of the notebook in order to achieve a better performance. Security Menu Install or clear the password settings for supervisor and user.
4-5 BIOS Setup Main Menu System Date This item allows you to set the system date. The date format is [day:month:date:year]. Day Day of the week, from Sun to Sat, which is determined by BIOS (read-only). Month (Month) The month from 01 (January) to 12 (December). Date (Date) The date from 01 to 31. Year (Year) The year can be adjusted by users. System Time This item allows you to set the system time. The system clock will go on no matter you shut down the PC or get into sleep mode.
4-6 BIOS Setup System Information This item provides the information about the firmware, processor, and system memory.
4-7 BIOS Setup Advanced Menu PCI Latency Timer This item controls how long each PCI device can hold the bus before another takes over. When set to higher values, every PCI device can conduct transactions for a longer time and thus improve the effective PCI bandwidth. For better PCI performance, you should set the item to higher values. Setting options: 32, 64, 96, 128, 160, 192, 224, and 248.
4-8 BIOS Setup Security Menu Change Supervisor Password When this item is selected, a message box shall appear on the screen as below: Enter New Password Type a maximum of eight-digit password and press [Enter]. The password typed now will replace any previously set password from CMOS memory. You may also press [ESC] to abandon new password setting. When the Supervisor Password is set, new items Change User Password and Password Check will be added in the menu.
4-9 BIOS Setup The Password Check item is used to specify the type of BIOS password protection that is implemented. Settings are described below: Setup The password is required only when users try to access to BIOS SETUP UTILITY. The password is required every time when the Notebook is Always powered on or when users try to access to BIOS SETUP UTILITY.
4-10 BIOS Setup Boot Menu Boot Settings Configuration Configure settings during system boot. Boot Device Priority These items showing the sequence of boot devices where BIOS attempts to load the disk operating system.
4-11 BIOS Setup Exit Menu Exit & Save Changes Save the changes you have made and exit the utility. Exit & Discard Changes Exit the utility without saving the changes you have made. Discard Changes Abandon your changes and reload the previous configuration before running the utility. Load Setup Defaults Select this item to load the default settings.