User Manual

8
Wireless 11b Mini PCI User’s Guide
Do not hold the Wireless 11b Mini PCI on the golden
finger because it may cause interference or damage.
2. hardware installation
The installation drawing below is suitable for most com-
puters which provide mini PCI module. For more informa-
tion about the mini PCI module, please refer to your com-
puter manual.
1. Remove the computer cover. Locate the mini PCI
module. The standard mini PCI module is shown
as the drawing.
To install Wireless 11b Mini PCI in
your system:
2. Place Wireless 11b Mini PCI over the Mini PCI
slot (at an angle of 30 degrees). Then, gently in-
sert it into the slot until the golden finger of the
card gets fully inserted.
3. Press down the card, and the retaining clips (on
two sides of the slot) will lock onto the notches of
the card.
To remove Wireless 11b Mini PCI
from your system:
1. Press the retaining clips outwards, and the card
should bound upwards slightly after being re-
leased from the slot.
2. Remove the card from the Mini PCI slot carefully.
30
Foolproof
notch