User's Manual

Wireless 11g MiniPCI Card MP54GS User’s Guide

Hardware Installation

>>> 2.1

The following diagrams provide you a basic installation

for the MP54GS, including how to install and remove the

MiniPCI card. The instruction below is suitable for most

computers with the

MiniPCI slot. For more information about the MiniPCI

module, please refer to your computer’s manual.

Installing the MP54GS

1. Locate the Mini PCI slot on the mainboard.

2. Place the MP54GS over the MiniPCI slot (at an

angle of 30 degrees). Then, gently insert it into

the slot until the golden finger of the card

gets fully inserted.

3. Press down the card, and the retaining clips

(on two sides of the slot) will lock onto the

notches of the card.

Foolproof

notch