User's Manual

ManualsBrandsMicro Star International ManualsComputers & AccessoriesWIRELESS 11B USB ADAPTER

DO NOT remove the UB11B (MS-6823)

while transferring data (the LED is flashing).

Please close the communication programs or

stop the task before removing it.

>>> 2.2 Removing the UB11B (MS-6823)

The UB11B (MS-6823) supports hot-plug function, so that

you can remove it under Windows operating system

without shutting down the system.

Remove the UB11B (MS-6823)

Summary of content (6 pages)

PAGE 1
>>> 2.2 Removing the UB11B (MS-6823) The UB11B (MS-6823) supports hot-plug function, so that you can remove it under Windows operating system without shutting down the system. Remove the UB11B (MS-6823) DO NOT remove the UB11B (MS-6823) while transferring data (the LED is flashing). Please close the communication programs or stop the task before removing it.
PAGE 2
Software Installation This section describes the procedures of installing the driver and utility. Follow the instruction step by step to finish the installation. If you use Windows® 98SE/ME, please prepare the Windows® Setup CD at hand before installing the driver; because the system will ask you to insert the Setup CD to copy files during the installation. >>> 3.1 Installing on Windows® 98SE/ME Step 1. Insert the driver CD into your CD-ROM drive, and the Setup program should launch automatically.
PAGE 3
Click The installation screen of Setup program Click the Install Software button. Then, the system will detect a new device and start to configure the new device. Click Restart when prompted. After rebooting, the system will search the new device again, click Cancel to continue the installation from the InstallShield Wizard. Step 2. The welcome screen of InstallShield Wizard appears. click Next. Read and accept the License Agreement, then click Next.
PAGE 4
Step 3. Click Install and the program will copy the necessary files to the system. The progress indicator shows the in stalling status. You may be asked to insert the Windows Setup CD during the installation. Please insert the Setup CD by the on-screen instruction to continue the installation. Step 4. When the installation is completed, click Finish. The system will restart. Click Yes when prompted to reboot the system. After rebooting, the MSI Wireless LAN icon* appears in the status area.
PAGE 5
>>> 3.2 Installing on Windows® 2000/XP Step 1. Insert the driver CD into your CD-ROM drive, and the Setup program should launch automatically. The card should be installed into your computer before installing the driver and utility. If the Autorun program doesn’t launch, click Start at the taskbar and select Run; type E:\setup.exe in the Open box and click OK, where E is your CD-drive. Click Windows XP Click the Install Software button.
PAGE 6
Step 2. The welcome screen of InstallShield Wizard appears. Click Next. Read and accept the License Agreement, then click Next. Step 3. Enter the user’s information (User Name, Organization) in the respective fields, then click Next. Click Install and the program will copy the necessary files to the system. The progress indicator shows the in stalling status. Step 4. When the installation is completed, click Finish. The MSI Wireless LAN icon* appears in the status area.