Specifications

9
Safety instructions
Please read the safety instructions carefully before operating the
receiver.
Please follow all warnings and instructions on the equipment and in
the operating manual.
Basic safety instructions
Electrical connection
• Do not expose the receiver to rain as well as any kind of
humidity to avoid risk of fire and electric shock.
• Never open the casing. Otherwise, there is a risk of electric
shock.
• Connect the receiver only to the power source installed by an
expert. It is either:
- for an external power pack:
A 100–240 V, 50-60 Hz mains socket as per specifications or
- for a 12 V cable:
An 11 V / 15 V DC supply as per specifications.
• Ensure that the total power consumption by the antenna
connection of the receiver does not exceed “LNB IN” 300 mA.
• Pull the external power pack or the 12 V cable out of the mains
socket if you will not use the device for a longer period of time.
Only pull at the external power pack or at the head piece of the
12 V cable, not at the cable itself.
• In case of a storm, pull the external power pack or the 12 V
cable of the receiver out of the mains socket.
• If foreign bodies or fluids enter the receiver, pull the external
power pack or the 12 V cable out of the mains socket. Ask a
qualified person to check the equipment before operating it
once again. Otherwise, there is a risk of electric shock.
• Do not bend or crimp any cable.
• If a cable used for mains supply is damaged, the receiver must
be repaired by an expert before re-using it. Otherwise, there is a
risk of electric shock.