User`s manual

BD-121
7
Main Menu
This section provides an overview of the menu options. These menu options are explained in
detail in the Using the QD Series Duplicator section starting on page 9.
Copy
Use the Copy menu to duplicate your master discs. Before you start a copy, make sure
you have selected the correct Master Source.
Test
Use the Test menu to simulate the copy process. With simulation, write once recordable
discs such as DVD-R, or CDR will be reusable.
Note: DVD+R and BD recordable media are not compatible with simulation mode. If
you try to simulate using one of these media types, you will encounter failure
messages. If you are using Rewritable discs as your blank media during the
simulation, the content on those discs will be permanently erased.
Compare
Use the Compare function to perform a bit-by-bit comparison between the content of your
master disc and the contents of all discs it copied. This ensures that all of your copies are
identical to original master disc.
Note: The bit-by-bit comparison will only apply on all BD and DVDs and Data CDs. The
readability check will be applied for other formats like Audio CDs and Video CDs
discs due to their lack of error correction mechanisms.
Test + Copy
Use the Test + Copy menu option to simulate the copying process initially. Then, the
duplicator performs the copy process on the blank disc(s) that passed the simulation.
Copy + Compare
Use the Copy + Compare menu option to make 100% reliable copies. After the copy
process is done, the duplicator automatically compares the copies from the content of
your original master disc.
Select Burn Speed
Use the Select Burn Speed menu option to adjust the duplication speed for the various
blank disc formats. For additional information, see Select Burn Speed on page 10.
Select Source
Use the Select Source menu option to specify which drive is being used as the master
drive.
Erase
Use the Erase menu to erase your Rewritable discs.
Mix Audio Tracks
Use the Mix Audio Tracks menu option to select and burn specific tracks from Audio CDs
onto your blank CDs.
Setup
Use the Setup menu options to control how the Duplicator operates. You can scroll
between the various options using the ▲ Up or ▼ Down button.
1. Language
2. Auto Start
3. Read Error Skip
4. CD Writing Mode
5. Max Audio, VCD & CDG Speed
6. Buzzer
7. Startup Menu
8. Screen Saver
9. Duplication Mode
10. Counter
11. DVD+R High Compatibility Mode
12. ISRC
13. Disable Drives
14. External Connection
15. CD+G Support (NOTE: CD+G Duplication is NOT supported – see pg 13)