Specifications
Table Of Contents
- TABLE OF CONTENTS
- System Overview
- Unpacking your system
- Installation Requirements
- Menu Overview
- Copy CD to CD
- Simulation CD to CD
- Registering Data to the Hard Drive (HDD)
- Erasing CD-RW media
- Copy Hard Drive (HDD) to CD
- Clearing the Hard Drive (HDD)
- Track Extraction
- Setup Menu
- Error Codes
- Specifications:
- Supported Formats:
- Firmware Updates
- Contact Information
COPYWRITER PRO SERIES DUPLICATOR MICROBOARDS TECHNOLOGY, LLC
Power supply
Use house current as the power source for the unit.
Do not use an outlet near a motor driven appliance (i.e. air conditioner,
copying machine).
Use an outlet with stable power supply voltages.
Do not overload an outlet. Do not use a service outlet from a PCs or other
office machine.
Wire the power cord properly.
Do not touch the power cord with a wet hand.
Be careful not to damage the power cord.
Inspect the power cord periodically.
In the event that the power cord is damaged, replace the power cord.
Be sure to use a tool such as the screwdriver to change the 115/230V Switch.
Do not use your finger.
5