CWR-424-52 CD Duplicator USER’S MANUAL www.microboards.com Version 2.
CWR-424-52 Microboards Technology LLC Table of Contents System Overview ...................................................................................................................................3 Advanced Features: .............................................................. 3 Unpacking your system .......................................................................................................................3 Setting up the CWR-424-52 duplicator .........................................
CWR-424-52 Microboards Technology LLC System Overview The CWR-424-52 is a professional, high-speed CD recordable duplicator engineered for the rackmount environment. Microboards Technology has applied their expertise in tower CD duplication to develop this sleek, black rackmount system to meet the demands of the Pro Audio user and information systems professional alike.
CWR-424-52 Microboards Technology LLC Setting up the CWR-424-52 duplicator Set up the CWR-424-52 duplicator with the following conditions: • 19” Rack mount position or • On a level and stable surface In a well ventilated location Temperature and humidity: • • o Temperature: 5-40° C o Humidity: 20-80%RH (no dew formation) Do not locate the CWR-424-52 duplicator: Under direct sunlight (If the machine is exposed to sunlight, the light should be blocked by a curtain or blind.
CWR-424-52 Microboards Technology LLC analyze the master. The reader drive will blink slowly during this process. Write Speeds: • FAST – It copies at maximum speed of 52x*. Status • Mode Mode Star MEDIUM – It copies at 40x*. Status Mode Mode Star t • SLOW - It copies at 8x*.
CWR-424-52 Microboards Technology LLC Copy Job Completes The CWR-424-52 automatically ejects the drive trays after the copy finishes successfully. The Master disc does not eject. You can use any or all of the four recorders to make copies. The CWR-424-52 ALARMS (beeps) when an error occurs with the media and/or drive. Discs will not be ejected and the error alarm beeps until you press the open tray button on the drive(s) that have failed. The drives that record correctly will eject the disc when completed.
CWR-424-52 Microboards Technology LLC Meaning of LED’s Listed below are the different states of the Status LED’s These indicate the status of the CWR-424-52 system. Light off Light on Slow blink Quick blink Copy Mode Process 1. Status Mode Ready to copy (Fast Speed). 2. Copying process is between 0%~30% complete. Status Mode Mode Copying process complete. is Status is Mode Copying process complete. 3. between 31%~60% 4. Status 5.
CWR-424-52 Microboards Technology LLC Error Display during Copying 1. Status Mode A repeating “long beep”, indicates an error reading the Master disc. The Master disc is unreadable. Try using another master disc. 2. Status Mode A repeating “long beep”, indicates the CD-R disc in the recorder drive is not blank. Try using a different blank disc. 3. Status Mode A repeating “long beep”, indicates an error reading the master disc or a write error writing to the CD-R media.
CWR-424-52 Microboards Technology LLC Test Copy Mode Process 1. Status Mode Test copying process complete (fast speed). Status Mode Test copying complete. Status Mode between 0%~30% 2. process between 31%~60% 3. Test copying process between 61%~100% complete. 4. Status Mode Test copy complete. A single “short beep” indicates the test is complete. The controller returns to the status shown in figure 1 on page 7.
CWR-424-52 Microboards Technology LLC Error Display during Test Copying 1. Status Mode A repeating “long beep”, indicates an error reading the master disc. Try using another master disc. 2. Status Mode A repeating “long beep”, indicates an error with the blank CD-R disc. Try using another CD-R disc in the recorder. Error Display in Additional System Modes System error.
CWR-424-52 Microboards Technology LLC Specifications: CD Recorder Drive: 52x CD-RW speed selectable drive Power Source: 115V/230V 50-60Hz switchable power supply Weight: 42 pounds Dimensions: 19” (W) x 18” (D) x 7” (H) Power supply: 250W Environment: Temperature: 40°C (104°F) / 5°C (41°F) Humidity: 20% - 80% Supported Formats: CD-DA , Mixed Mode, ISO9660, Hybrid, CD-ROM Mode1/Mode2, CD-I, CD-ROM XA Form1/form2 , HFS, UFS,CD-EXTRA (CD-PLUS) Firmware Update Occasionally it may be necessary to lo
