Disc Copier Reference Manual

Orbit II Disc Copier Reference Manual – Revision K
37
11.4 Specifications
Capacity: 50 CD-Rs
Media: CD-Rs or CD-RWs can be used as masters, or blanks. “Packet format”, which is
used on many CD-RW discs, is not supported by the Orbit II Controller. It should
also be noted that copying to blank CD-RW discs reduces throughput because the
recording operation is slower.
Formats: CD ROM Mode 1 Mixed Mode
CD-XA Mode 2 form 1 & 2 Hybrid
ISO 9660 HFS
UFS Photo CD
CD-DA (Red Book) Single Session CD-I Bridge
CD-Extra / CD Plus / CD-Enhanced Video CD
Multi Session CD+G Karaoke
Note: Packet mode is not supported for CD-Rs or CD-RWs.
Masters: Disc-At-Once
Session-At-Once
Track-At-Once
Notes:
 Discs left open on masters will be left open on the duplicates.
 Discs are always written disc at once.
Reliability: Mean Disc Insertions Between Failure >200,000
MTBF >10,000 hours
MTTR <30 minutes
Mechanical: H x W x D 9“ x 18” x 12”
(23 cm x 46 cm x 30.5 cm)
Weight Shipping 30 lb (13.6 kg)
Operating without CD-Rs 20 lb (9.1 kg)
Electrical: External Power Supply 100 – 240 VAC, 50/60 Hz, 1.0/0.5 Amps 100 Watts
Environment: Temp. – Operating 65 – 85 degrees F (18 – 29 degrees C)
Temp. – non Op. -44–176 degrees F (-40– 80 degrees C)
RH Operating 20 – 80 % non-condensing
RH Storage 05 – 95 %
Vibration: Operating > 0.3 G (5 – 30 Hz)
Non-Operating > 0.5 G (11 msec max.)
Shock: Operating > 5 G (11 msec max)
Non-Operating > 50 G (11 msec max)
Altitude: Operating 10,000 ft (3,048 meters)
Non-Operating 30,000 ft (9,144 meters)