User`s manual

DVD Premium Pro LightScribe Series
11
Microboards B.30
2. Print
Microboards B.30
3. Copy + Print
After a few seconds of processing time, one of the following Copy Progress screens will appear.
Copying... 4063MB
0/21 12% 488MB
or:
Copying... 4063MB
0 12% 488MB
¾ “4063MB” indicates the
capacity of the master
disc.
¾ “0/21” indicates you have
a project size of 21
copies and you have
made 0 copies so far.
¾ “12%” indicates the
current progress of the
duplication.
¾ 488MB indicates the
amount of data burned
so far.
¾ “4063MB” indicates the
capacity of the master
disc.
¾ “0” indicates you have
made 0 copies so far.
¾ “12%” indicates the
current progress of the
duplication.
¾ 488MB indicates the
amount of data burned so
far.
Note: It is normal to see the progress indicator stay at 0%-10% and 100% for
approximately 30 seconds for CD duplication and up to one minute for DVD duplication.
That is caused by the initializing and finalizing stages.
Once the duplication run is completed, the recorder drives will
eject and the number of successful and failed discs will be
displayed.
At this point, you can add more blank discs to the recorder drives and repeat the process. If you
have the Counter set, only the number of discs selected will be burned.
If you need to switch master discs and have the duplicator in Load and Copy or Prompt mode
(see Duplication Mode, page 18), you must press ESC at this point to return to the 1. Copy
menu or the prior master loaded will be burned to your new blank media.
Print
The Print function allows you to burn the selected LightScribe
image to LightScribe media.
The LightScribe file must be created using the supplied LightScribe Template software and either
burned to a disc or saved to the hard drive of the duplicator when using the External Connection
feature. Note that you must have the External Connection setting OFF for labels on the hard
drive to be accessible to the duplicator.
Regardless of the source, you will use the ▼▲ buttons to move between the available labels,
pressing the ENT button when the name of the label you want is displayed. The printing process
will begin at that point; when the printing is complete, the drives will eject.
Copy + Print
This menu option will not be available if the External
Connection setting is On.
The Copy + Print function combines the Copy and Print functions,
requiring that you flip the media over prior to the Print process.
Both the master image and the label file must be on the hard drive to use this function. If the
Hard Drive is not already selected as the source, you will be asked to press ENT to set it. ESC
will return you to the main menu.
After pressing ENT, you will be asked to select the Hard Drive partition containing the master
image you wish to burn. Use the ▼▲ buttons to move between the available partitions, pressing
the ENT button when the partition you want is displayed.
Next, select the Print Label from the hard drive in the same manner as selecting the master
image. Use the ▼▲ buttons to move between the available labels, pressing the ENT button
when the name of the label you want is displayed.
Pass 3 Fail 0 ( 3)
Waiting for Blanks