User`s manual

Microboards Technology, LLC
12
Microboards B.30
5. Compare
Compare OK: 7
Fail: 0 Diff: 0
Src:01 CD-RW
Total: 15.2MB
Tgt: 00 CD-RW
Identical
Microboards B.30
4. Test
Microboards B.30
6. Test+Copy
Microboards B.30
7. Copy+Compare
Microboards B.30
8. Select Burn Speed
Once the master image and label have been selected, the duplication will begin. Once the data is
burned, you will be prompted to turn the burned media over and close the drive trays. Once the
media is recognized, the selected print image will be printed onto the discs.
Test
If you have the External connection On, the display will show this
menu item as 3, not 4.
The Test function is useful to determine if your master disc can be successfully read.
This process is identical to the Copy process, with the one exception being that the discs will not
be burned to if the media supports test mode.
DVD+R media does not support test mode.
Running rewritable media in Test mode will cause any data on the discs to be erased.
Compare
If you have the External connection On, the display will show this menu item as 4, not 5.
The Compare function is used to compare the master disc with the
copied discs. The Compare function will only work with Data masters.
If your master disc has audio or video (VCD) on it, the Compare
function will not work.
To use the Compare function, press the ▼▲ buttons until 3. Compare is displayed.
Place your master disc into the DVD reader drive and your copied discs into the DVD recorder
drives.
Press the ENT button on the controller interface.
The duplicator will now compare the copies to the master disc.
When completed, the display will read:
Press the ▼ button and the following screen will appear:
Press the ▼ button again and the following screen will appear.
Use the ▼ button to scroll through each drive that was used during
the Compare
Test + Copy
If you have the External connection On, the display will show this
menu item as 5, not 6.
The Test + Copy function first simulates the burn to the media
and then burns to the media if the Test simulation is successful.
DVD +R media does not support test mode.
Copy + Compare
If you have the External connection On, the display will show this
menu item as 6, not 7.
The Copy + Compare function first burns to the media and then runs a comparison of the burned
discs to the master disc.
Select Burn Speed
If you have the External connection On, the display will show this
menu item as 7, not 8.
This menu option allows you to change the duplication speed for
each of the duplication job types. Available burn speeds will vary, depending on the model of the
recorder drives installed in your duplicator. Press the ENT button to change burn speeds.
Since speeds can be set based on media type being used or whether the hard drive is being used
as the source, press the ▼▲ buttons to navigate to the duplication type whose burn speed you