User`s manual

DVD Premium Pro LightScribe Series
13
Microboards B.30
9. Select Source
Microboards B.30
10. Erase
Load Partition[231GB]
Load- New Partition
Microboards B.30
11. Hard Drive Setup
wish to change, then press the ENT button. Use the ▼▲ buttons again to display the burn
speed you would like to choose and press ENT.
When you have changed the burn speed, press ESC to return to the main menu.
Select Source
If you have the External connection On, the display will show this
menu item as 8, not 9.
Use this menu to select which drive will be used as the master
drive, in which you would load your master disc. By default, the top drive is set as the source.
The hard drive can also be selected as the source if you will be burning images from the hard
drive partitions.
Press the ENT button to change the source drive. Use the ▼▲ buttons to navigate through the
drives, pressing ENT when the drive you want to use is shown.
It is not recommended that you change the source to anything other than the top drive or the hard
drive unless it is necessary to do so.
If the External Connection is active, the hard drive will not be available and the source
drive will be reassigned to one of the other drives in the duplicator.
Erase
If you have the External connection On, the display will show this
menu item as 9, not 10.
This menu option is used to erase rewritable media placed in the recorder drives. The Erase
function has 2 options:
¾ Full Erase: This option erases the entire disc, destroying all previously written data in the
process.
¾ Quick Erase: This option erases the index (TOC) of the Rewritable disc, not the data
section. It is much faster than Full Erase. However, the data section is still recoverable.
If you prefer the old content not to be recovered for security purpose, please perform
Full Erase.
Hard Drive Setup
This menu option will not be available if the External
Connection setting is On.
If it is not already set so, you will be asked if you want the set the hard drive as the source. Press
the ENT button to set the hard drive as the source and enter the Hard Drive Setup menu.
1. Select Partition
This function is used to select the default partition on the hard drive for duplication.
Use the ▼▲ buttons to move between the available partitions, pressing the ENT
button when the partition you want is displayed. The partition selected will become the
first that is displayed after you press the ENT button when the display reads 1. Copy.
2. Load Partition
Use this function when you want to add a new master
disc partition to your hard drive.
After pressing ENT when the display reads 2. Load Partition, you will be asked to verify
that you want to load a partition. Press ENT to continue loading.
Enter in the partition name of up to 14 characters, using the ▼▲ buttons to change the
first character. Press ENT when the character you want is in the cursor position. To
leave a position blank, press ENT when the space is empty.
After entering in all 14 characters, press ENT to highlight OK on the display. If the
name is correct, press ENT. If you need to make changes, press the ESC button until
the cursor is on the character that needs to be changed.
You will be asked to verify the name one last time before the master inserted in the
reader drive is copied to the hard drive. The copy progress will be sown on the display.
Once the master disc is copied to the hard drive, the reader drive will be ejected.
The master under the partition name you entered will now be available for duplication
from the hard drive.