User`s manual

DVD Premium Pro LightScribe Series
17
Microboards B.30
17. AutoCopy
Microboards B.30
18. Shutdown
4. Delete User
The Delete User is used to remove users account from the list. The Admin user
account cannot be deleted.
Use the ▼▲ buttons to scroll through the list of existing users. When the display is
showing the user you want to remove, press the ENT button. You will be asked to
verify that you want to remove the user; press ENT if you do, or ESC if it is not the
correct user to delete.
The display will briefly show that the selected user has been deleted.
5. Password on Bootup
To use the Managed Accounts Users to limit access to the duplicator, you must turn
the Password on Bootup setting to YES. This will take effect the next time the
duplicator is turned on.
You must use either the Save function in the Utilities menu or the Shutdown function prior
to turning the duplicator off, or changes you have made to the user accounts may not be
saved!
AutoCopy
If you have the External connection On, the display will show this
menu item as 15, not 17.
The AutoCopy function simplifies the copy process. After the
initial round of blanks is burned, you only need to load the drives
again and close them. Once the drives detect the new blank media in the drives, duplication
begins without you having to touch the control panel (Auto Start must be set to Auto or Full).
Shutdown
If you have the External connection On, the display will show this menu item as 16, not 18.
When turning off your DVD Premium Pro LightScribe Duplicator,
it is highly recommended that you do so using the Shutdown
menu option. Not only does this function save any system
settings that you may have changed in the Setup menu, it also
shuts down the duplicator components in a safe way.
When the display reads Ready to Power OFF after selecting the Shutdown function, you can use
the power switch on the front.