User`s manual

DVD Premium Pro LightScribe Series
5
Introduction
The DVD Premium Pro LightScribe Series includes models containing 3, 5, 7, and 10 recorders,
as well as an internal hard drive for convenient master storage.
In addition, the LightScribe feature allows you to burn print images created in the LightScribe
image designer to LightScribe media.
Regardless of the number of drives, the DVD Premium Pro LightScribe is perfect for any user
requiring easy copying of audio, video, or Data DVD/CDs, then using the same duplicator to burn
the print image to the copies you have just made. The 2-line 20 character LCD display panel
provides the user with status of the duplication process, the type of process being run, master
size, and other useful information.
Applications suited for the DVD Premium Pro LightScribe include Pro Audio, Multimedia,
Government / Education, Software Development, Medical Imaging, and Data Interchange.
Unpacking your system
When unpacking your duplicator, confirm the following items are included:
• DVD Premium Pro LightScribe duplicator
• Power cable
• Manual
• DVD-R disc
• USB cable
• NetConnect software Installation Disc
• Zulu2 CD/DVD recording software Installation Disc
• LightScribe Software Installation Disc
If any of these items are missing, please contact Microboards Technology Technical Support.
IMPORTANT: Please keep all the packing for your DVD Premium Pro LightScribe duplicator. If
your unit ever needs to be sent in for service, it must be returned in the original packing or the
warranty will be voided.
Installation
• Connect the supplied power cable to the DVD Premium Pro LightScribe duplicator and
plug in to a protected power outlet strip or UPS power supply.
Note for Installation:
1) Please verify that the voltage switch above the power connection is set correctly for
your local power specifications.
2) The socket outlet should be installed near the equipment and be easily accessible.
3) Do not block cooling fans.
• Turn on power to the duplicator.
• The system will go through initialization and then display: 1. Copy.
• Install the NetConnect application and drivers on any PC that may be accessing the hard
drive in the duplicator. These are necessary for your PC to recognize the duplicator hard
drive’s format.
• For USB Mode, connect to a PC via an unoccupied USB port. To access the drive:
o The External Connection mode must be turned ON in the Setup Menu (See page
19).
o The NetConnect application must be installed from the installation disc included
with your Premium Pro LightScribe Duplicator.
• To create LightScribe label images, you must install the LightScribe Template Labeler and
LightScribe System Software using the installation disc included with your Premium Pro
LightScribe Duplicator.
• The system is now ready to use.