Datasheet

24AA01/24LC01B
DS21711C-page 2  2003 Microchip Technology Inc.
1.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings
(†)
VCC.............................................................................................................................................................................6.5V
All inputs and outputs w.r.t. V
SS ......................................................................................................... -0.3V to VCC +1.0V
Storage temperature ...............................................................................................................................-65°C to +150°C
Ambient temperature with power applied................................................................................................-65°C to +125°C
ESD protection on all pins ......................................................................................................................................................≥ 4kV
TABLE 1-1: DC CHARACTERISTICS
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to
the device. This is a stress rating only and functional operation of the device at those or any other conditions
above those indicated in the operational listings of this specification is not implied. Exposure to maximum rating
conditions for extended periods may affect device reliability.
DC CHARACTERISTICS
V
CC = +1.8V to +5.5V
Industrial (I): T
A = -40°C to +85°C
Automotive (E): T
A = -40°C to +125°C
Param.
No.
Sym Characteristic Min Typ Max Units Conditions
D1 VIH WP, SCL and SDA pins
—
————
D2 — High-level input voltage 0.7 V
CC ——V—
D3 VIL Low-level input voltage — — 0.3 VCC V—
D4 VHYS Hysteresis of Schmitt
Trigger inputs
0.05 VCC ——V(Note)
D5 V
OL Low-level output voltage — — 0.40 V IOL = 3.0 mA, VCC = 2.5V
D6 ILI Input leakage current ——±1µAVIN =.1V to VCC
D7 ILO Output leakage current ——±1µAVOUT =.1V to VCC
D8 CIN,
C
OUT
Pin capacitance
(all inputs/outputs)
——10pFVCC = 5.0V (Note)
T
A = 25°C, FCLK = 1 MHz
D9 I
CC write Operating current —0.1 3mAVCC = 5.5V, SCL = 400 kHz
D10 ICC read — 0.05 1 mA —
D11 ICCS Standby current —
—
0.01
—
1
5
µΑ
µΑ
Industrial
Automotive
SDA = SCL = VCC
WP = VSS
Note: This parameter is periodically sampled and not 100% tested.