Microchip Development Systems Ordering Guide June 2005 © 2005 Microchip Technology Inc.
Note the following details of the code protection feature on Microchip devices: • Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature.
Table of Contents INTRODUCTION ........................................................................................................................ 1 About Microchip Development Tools .......................................................................................................... 2 Microchip Technology Service and Support ................................................................................................ 2 Microchip Internet Connections ............................................
Development Systems Ordering Guide EMULATION ............................................................................................................................41 MPLAB® ICE 2000 Modular In-Circuit Emulator ....................................................................................... 42 MPLAB® ICE 4000 Modular In-Circuit Emulator ....................................................................................... 43 MPLAB® ICE 2000/4000 Replacement Accessories .........................
Table of Contents ANALOG AND MIXED-SIGNAL DEMO BOARDS AND KITS ............................................... 77 PICDEM™ MSC1 Demonstration Kit ........................................................................................................ 78 PICDEM™ MSC1 Daughter Boards ......................................................................................................... 79 MCP41XXX/42XXX Digital Potentiometer Evaluation Board ...................................................................
Development Systems Ordering Guide NOTES: DS30177T-page vi © 2005 Microchip Technology Inc.
INTRODUCTION This section contains the following major topics: About Microchip Development Tools ........................................................................................... 2 Microchip Technology Service and Support ................................................................................ 2 Microchip Internet Connections................................................................................................... 3 © 2005 Microchip Technology Inc.
Development Systems Ordering Guide About Microchip Development Tools Microchip Technology Service and Support With more than 300,000 development tools installed worldwide, Microchip is well known for the seamless integration of their tools with the intuitive MPLAB® Integrated Development Environment (IDE), for the breadth of products that cover all stages of the product development cycle, and for the highest level of support and service.
Introduction Microchip Internet Connections On-Line Support The following are some of the many services available on the web site: Microchip provides many avenues of on-line support on the Microchip web site at: • www.microchip.com Users may download files for the latest development tools, data sheets, application notes, user’s manuals, articles and sample programs. Microchip-specific business information is also available, including contact information for all Microchip sales offices and distributors.
Development Systems Ordering Guide NOTES: DS30177T-page 4 © 2005 Microchip Technology Inc.
SOFTWARE This section contains the following major topics: MPLAB® Integrated Development Environment (IDE) ................................................................ 6 MPLAB® IDE Visual Device Initializer Software .......................................................................... 7 Application Maestro™ Software ..................................................................................................8 MPLAB® C18 C Compiler ...............................................................
Development Systems Ordering Guide FREE MPLAB® Integrated Development Environment (IDE) • • • • • • • Source-Level Debugger On-line Help Project and Set-up Wizards Project Manager Visual Device Initializer (see page 7) Programmer’s Editor Drivers for hardware tools (as listed in the Tools Supported section) • Integration with Source Code Control The MPLAB IDE desktop provides the development environment and tools for developing and debugging applications as a project, providing a common user interface for
Software FREE MPLAB® IDE Visual Device Initializer Software MPLAB IDE Visual Device Initializer does extensive error checking on assignments and conflicts on pins, memories and interrupts, as well as a selection of operating conditions. The generated code files are seamlessly integrated with the rest of the application code through the MPLAB IDE project manager. The detailed reports on resource assignment and configuration simplify project documentation.
Development Systems Ordering Guide FREE Application Maestro™ Software The Microchip Application Maestro Software is a stand-alone software tool that allows users to configure and incorporate a range of pre-written firmware modules into their applications. Its heart is a collection of modules developed by Microchip Technology for use with its PICmicro® microcontrollers. Starting from a graphic interface, the user selects one or more available modules, then configures the parameters for each.
Software MPLAB® C18 C Compiler The MPLAB C18 is a full-featured ANSI-compliant C compiler for the Microchip Technology PIC18CXXX family of PICmicro® MCUs. MPLAB C18 is fully compatible with Microchip’s MPLAB IDE, allowing source level debugging with both the MPLAB ICE and the MPLAB SIM Simulator. MPLAB C18 provides a convenient, project-oriented development environment that reduces development time.
Development Systems Ordering Guide MPLAB® C30 C Compiler MPLAB® C30 – dsPIC® C Compiler MPLAB C30 is distributed with a complete ANSI ‘C’ standard library. The library includes functions for string manipulation, dynamic memory allocation, data conversion, timekeeping and math functions (trigonometric, exponential and hyperbolic). The standard I/O functions for file handling are also included, and, as distributed, they support full access to the host file system using the command-line simulator.
Software FREE dsPIC30F DSP Library The dsPIC30F DSP Library provides a set of speed-optimized functions for the most common digital signal processing applications. The DSP Library provides significant performance savings over equivalent functions coded in ‘C’ and allows developers to dramatically shorten their development time.
Development Systems Ordering Guide FREE dsPIC30F Math Library The dsPIC30F Math Library is the compiled version of the math library that is distributed with the highly optimized, ANSI-compliant dsPIC30F MPLAB® C30 C Compiler (SW006012). It contains advanced single and double-precision, floating-point arithmetic and trigonometric functions from the standard ‘C’ header file . The library delivers small program code size and data size, reduced cycles and high accuracy.
Software FREE dsPIC30F Peripheral Library The dsPIC30F Peripheral Library provides a set of functions for setting up and controlling the operation of all the peripheral modules available in the dsPIC30F devices, as well as functions for interfacing with an external LCD. The Peripheral Library serves as a convenient layer of abstraction over the specific details of the peripherals and their associated control and status registers.
Development Systems Ordering Guide dsPIC30F Soft Modem Library The Microchip Soft Modem Library is composed of ITU-T compliant algorithms for V.21, V.22, V.22bis, V.23, V.32 and V.32bis modem recommendations. Bell standard 103 is also included in this library. V.21, V.23 and Bell 103 are Frequency Shift Keying (FSK) modems. V.32, V.32bis and V.22bis are Quadrature Amplitude Modulated (QAM) modems. V.22 is a Quadrature Phase Shift Keyed (QPSK) modem. V.21, V.22, V.22bis, V.32 and V.
Software dsPIC30F Speech Recognition Library The dsPIC30F Speech Recognition Library provides voice control of embedded applications that require an alternative user interface. With a vocabulary of up to 100 words, the Speech Recognition Library allows users to control their applications vocally. The Speech Recognition Library is an ideal front-end for hands-free products, such as modern appliances, security panels and cell phones.
Development Systems Ordering Guide dsPIC30F Noise Suppression Library The dsPIC30F Noise Suppression Library provides a function to suppress the effect of noise interference with a speech signal. This function is useful for microphone-based applications, which have a potential for incoming speech corruption by ambient noise captured by the microphone.
Software dsPIC30F Acoustic Echo Cancellation Library The dsPIC30F Acoustic Echo Cancellation (AEC) Library provides a function to eliminate echoes generated in the acoustic path between a speaker and a microphone.
Development Systems Ordering Guide dsPIC® DSC Symmetric Key Embedded Encryption Library Microchip offers a reliable security solution for embedded applications built on the dsPIC30F platform. This solution is provided by means of two libraries – Symmetric Key and Asymmetric Key Embedded Encryption Libraries.
Software dsPIC® DSC Asymmetric Key Embedded Encryption Library Microchip offers a reliable security solution for embedded applications built on the dsPIC30F platform. This solution is provided by means of two libraries – Symmetric Key and Asymmetric Key Embedded Encryption Libraries.
Development Systems Ordering Guide NEW dsPIC30F Speech Encoding/Decoding Library The dsPIC30F Speech Encoding/Decoding Library performs toll-quality voice compression and voice decompression. The library is based on a modified version of Speex source code and features a 16:1 compression ratio. It samples speech at 8 kHz and compresses it to a rate of 8 kbps. Storing compressed speech for playback requires approximately 1 Kbyte of memory for each second of speech.
Software FREE dsPICworks™ Data Analysis and DSP Software dsPICworks software is an easy-to-use data analysis and signal processing package for designs using dsPIC30F digital signal controllers.
Development Systems Ordering Guide Digital Filter Design/Digital Filter Design Lite The Digital Filter Design tool for the dsPIC® 16-bit Digital Signal Controllers makes designing, analyzing and implementing Finite Impulse Response (FIR) and Infinite Impulse Response (IIR) digital filters easy through a menu-driven and intuitive user interface.
Software CMX-MicroNet™ for dsPIC30F Devices CMX-MicroNet is an embedded TCP/IP stack that is specifically designed for optimized use of Flash and RAM resources on Microchip’s 16-bit Digital Signal Controller. The software runs directly on the processor with no gateways or PCs required. The stack can be run in Stand-alone mode or work in conjunction with an RTOS.
Development Systems Ordering Guide CMX-RTX™ for dsPIC30F Devices In some cases, well-structured linear programming is sufficient for a product. In most cases, however, programmers appreciate not having to worry about structuring their code to perform all necessary tasks in a timely manner. This is where CMX-RTX can help. CMX-RTX allows tasks (pieces of code that do specific duties) to run quasi-concurrently.
Software FREE CMX-Scheduler™ for dsPIC® DSC Devices CMX-Scheduler is the result of a special collaboration between CMX and Microchip. Available in object code only, CMX-Scheduler is available for FREE to embedded systems designers using the dsPIC® digital signal controllers. CMX-Scheduler is specially designed for developers whose designs do not require a full blown RTOS and/or who are wondering if a kernel might help their application.
Development Systems Ordering Guide CMX-Tiny+™ for dsPIC30F Devices In some cases, well-structured linear programming is sufficient for a product. In most cases, however, programmers appreciate not having to worry about structuring their code to perform all necessary tasks in a timely manner. This is where CMX-Tiny+ can help. CMX-Tiny+ allows tasks (pieces of code that do specific duties) to run quasi-concurrently.
Software FREE FilterLab® Active Filter Software Design Tool Features FilterLab Active Filter Software Design Tool is an innovative software tool that simplifies active filter design. The FilterLab Active Filter Software Design Tool provides full schematic diagrams of the filter circuit with component values and displays the frequency response.
Development Systems Ordering Guide FREE Total Endurance™ Software Model Microchip’s revolutionary Total Endurance Software Model provides electronic system designers with unprecedented visibility into serial EEPROM-based applications. This advanced software model (with a very friendly user interface) eliminates time and guesswork from serial EEPROM-based designs by accurately predicting the device’s performance and reliability within a user-defined application environment.
Software KEELOQ® Security ICs License CD The KEELOQ Security ICs License CD contains application notes, decoder software and the KEELOQ Security ICs Software Toolkit. Also included are data sheets, development tools documentation and MPLAB® IDE software. The KEELOQ Security ICs decoder software is typically used as the starting point of a decoder design. The software is fully described in the application notes accompanying the software.
Development Systems Ordering Guide NOTES: DS30177T-page 30 © 2005 Microchip Technology Inc.
HARDWARE This section contains the following major topics: MPLAB® ICD 2 In-Circuit Debugger.......................................................................................... 32 MPLAB® ICD 2 Accessories .....................................................................................................33 PICSTART® Plus Development Programmer............................................................................ 34 PICkit™ 1 Flash Starter Kit......................................................
Development Systems Ordering Guide MPLAB® ICD 2 In-Circuit Debugger The MPLAB ICD 2 module is a low-cost development tool that connects between the PC and the designer’s target board, allowing direct in-circuit debugging of a target PICmicro® MCU or dsPIC® DSC. Programs can be executed in real time or single step, watch variables established, break points set, memory read/writes accomplished and more. It can also be used as a development programmer for the microcontrollers.
Hardware MPLAB® ICD 2 Accessories RS-232 and Power Supply Kit Features Universal Power Supply and Serial Cable to support using the ICD 2 for serial communications or with the Universal Programmer Module. These items are included with the MPLAB® ICD 2 Evaluation Kit (DV164006) and MPLAB® ICD 2 Module ws (DV164007) products.
Development Systems Ordering Guide PICSTART® Plus Development Programmer The PICSTART Plus Programmer gives the product developer the ability to program user software into any of the supported microcontrollers. The PICSTART Plus Programmer software, running under MPLAB® IDE, provides for full interactive control over the programmer. The PICSTART Plus Programmer provides the product development engineer with a highly flexible, low-cost design tool set for all PICmicro® MCUs (DIP packages, up to 40 pins).
Hardware PICkit™ 1 Flash Starter Kit The PICkit 1 Flash Starter Kit is a low-cost development kit with an easy-touse interface for programming Microchip’s 8/14-pin Flash family of microcontrollers. This starter kit is designed to help the user get up to speed quickly using PICmicro® microcontrollers. The kit provides everything needed to program, evaluate and develop applications using Microchip’s powerful 8/14-pin Flash family of microcontrollers.
Development Systems Ordering Guide rfPIC® Development Kit 1 The rfPIC Development Kit 1 provides design engineers with an easy way to evaluate unidirectional, remote sense and control wireless links based on the rfPIC12F675 and rfRXD0420/0920 devices. The kit is based on the popular PICkit™ 1 Flash Starter Kit and consists of modular building blocks for different transmitters and receivers that can be utilized for prototype systems or to evaluate different options using Microchip products.
Hardware PIC10F2XX Programmers/Adapters Baseline Flash Microcontroller Programmer PIC10F2XX Universal Programmer Adapter The Baseline Flash Microcontroller Programmer (BFMP) is a simple and easy to use ICSP™ programmer intended to be used with any of Microchip’s new baseline Flash PIC® microcontrollers.
Development Systems Ordering Guide Signal Analysis PICtail™ Daughter Board The Signal Analysis PICtail Daughter Board comes populated with a PIC16F684 MCU and two 25LC640 SPI™ compatible serial EEPROM memory devices. . Signal Analysis PICtail™ Daughter Board Contents The Signal Analysis PICtail™ Daughter Board works as an extension to the PICkit™ 1 Flash Starter Kit. When combined with the PICkit 1 Flash Starter Kit, version 2.0.
Hardware NEW Ethernet PICtail™ Daughter Board Features • • • • IEEE 802.3 Compliant 10Base-T Ethernet RJ-45 Female Ethernet Connector Plug in compatible with: - PICDEM HPC Explorer (DM183022) - PICDEM Z 2.4 GHz Demonstration Board (DM163027-2)* - PICDEM FS USB Demonstration Board (DM163025)* * Future Support The Ethernet PICtail Daughter Board provides a costeffective method of evaluating and developing Ethernet control applications.
Development Systems Ordering Guide NEW PICkit™ 2 Starter Kit The Microchip PICkit™ 2 Starter Kit provides a quick, easy and low-cost way to start development, from concept to prototype, using selected Flash-based PIC® microcontrollers. The PICkit 2 Starter Kit is a complete “development system in a box”, providing programming, evaluation and development in one simple design.
EMULATION This section contains the following major topics: MPLAB® ICE 2000 Modular In-Circuit Emulator ....................................................................... 42 MPLAB® ICE 4000 Modular In-Circuit Emulator ....................................................................... 43 MPLAB® ICE 2000/4000 Replacement Accessories ................................................................ 44 Ordering Information ................................................................................
Development Systems Ordering Guide MPLAB® ICE 2000 Modular In-Circuit Emulator Microchip’s universal MPLAB ICE 2000 for PICmicro® MCUs has been designed with user requirements in mind. The system is small, portable, lightweight and offers improved performance and value. For quick hook-up to portable or desktop PCs, MPLAB ICE 2000 easily connects to the parallel (printer) port. Interchangeable processor modules allow the system to be easily configured to emulate different processors.
Emulation MPLAB® ICE 4000 Modular In-Circuit Emulator The MPLAB ICE 4000 in-circuit emulator is intended to provide the product development engineer with a complete microcontroller design tool set for high-end PICmicro® microcontrollers. Software control of the emulator is provided by the MPLAB Integrated Development Environment, which allows editing, building, downloading and source debugging from a single environment.
Development Systems Ordering Guide MPLAB® ICE 2000/4000 Replacement Accessories Device Adapter Plugs Device adapter plugs are available as replacement accessories. The table below lists the replacement part number.
Emulation Ordering Information MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems How to Order MPLAB ICE An MPLAB ICE emulator system is ordered as separate components. Knowing the terms will make it easy to order and use the MPLAB ICE emulator system. Read more about each component. MPLAB ICE is easy to order, using these three steps. Emulator Pod 1. Determine the PICmicro® MCU device needed. 2. Identify the PICmicro MCU package needed. 3.
Development Systems Ordering Guide NOTES: DS30177T-page 46 © 2005 Microchip Technology Inc.
PROGRAMMING This section contains the following major topics: MPLAB® PM3 Universal Device Programmer........................................................................... 48 In-Circuit Serial Programming™ (ICSP™) Socket for PRO MATE® II Device Programmer ..... 49 Programmer Adapter Kits and Accessories .............................................................................. 50 © 2005 Microchip Technology Inc.
Development Systems Ordering Guide MPLAB® PM3 Universal Device Programmer The MPLAB PM3 Universal Device Programmer is easy-touse and operates with a PC or as a stand-alone unit, and programs Microchip’s entire line of PICmicro® devices, as well as the latest dsPIC30F DSC devices. The MPLAB PM3 features a large and bright LCD unit (128 x 64 pixels) to display easy menus, programming statistics and status information.
Programming In-Circuit Serial Programming™ (ICSP™) Socket for PRO MATE® II Device Programmer Microchip offers an ICSP kit that can be used with Microchip’s PRO MATE II Device Programmer. Together, these two tools allow you to implement ICSP with minimal effort and use the ICSP capability of Microchip’s PICmicro® MCUs. In-System Programming is a technique where a programmable device is programmed after the device is placed in a circuit board.
Development Systems Ordering Guide Programmer Adapter Kits and Accessories 68-Pin PLCC Adapter Kit 28-Pin QFN Adapter Kit PIC16C92X/PIC17C75X 68-pin PLCC Adapter for PICSTART® Plus Development Programmer. Currently, this header supports PIC16C92X and PIC17C75X. PIC16CXX 28-pin QFN Adapter for PICSTART® Plus and PRO MATE® II Programmers (with AC164012). 84-Pin PLCC Adapter Kit PIC17C6X 84-pin PLCC Adapter for PICSTART® Plus Development Programmer.
PICmicro® MCU DEMO BOARDS This section contains the following major topics: PICDEM™ Demonstration Boards ............................................................................................ 52 PICDEM™ 2 Plus Demonstration Board................................................................................... 53 PICDEM™ 4 Demonstration Board........................................................................................... 54 PICDEM™ 18R Demonstration Kit.....................................
Development Systems Ordering Guide PICDEM™ Demonstration Boards The PICDEM Demonstration Boards, PICDEM 1, PICDEM 3 and PICDEM 17 are simple boards which demonstrate the capabilities of Microchip PICmicro® MCU families. See the “Cross Reference” section for specific device support for each board. All necessary hardware is included to run basic demonstration programs, which are supplied on a CD.
PICmicro® MCU Demo Boards and Kits PICDEM™ 2 Plus Demonstration Board The PICDEM 2 Plus Demonstration Board is a powerful, low-cost learning and demonstration board. The board comes with an active program loaded on the installed PIC18F452 microcontroller that provides real-time clock and local temperature display. The code to accomplish all of these program features is provided unassembled, so the user can understand and dissect the programming algorithm, helping them to quickly learn.
Development Systems Ordering Guide PICDEM™ 4 Demonstration Board The PICDEM 4 Demonstration Board supports Microchip’s low pin count PICmicro® Flash microcontrollers, including the PIC16F and PIC18F families featuring nanoWatt Technology. nanoWatt Technology refers to Microchip’s advanced PMOS Electrically Erasable Cell (PEEC) process technology, circuit design, manufacturing and application techniques.
PICmicro® MCU Demo Boards and Kits PICDEM™ 18R Demonstration Kit This kit demonstrates the power and flexibility of Microchip’s new ROMless PIC18C601/801 microcontrollers and will significantly speed up development time for integrating these parts into an end product. The ROMless demonstration board will allow several alternative types of memory to be evaluated with PICmicro® MCUs. It includes an MPLAB® ICD connector interface for the MPLAB ICD 2 In-Circuit Debugger module, which allows low-cost debugging.
Development Systems Ordering Guide NEW PICDEM™ Mechatronics Demonstration Kit The PICDEM Mechatronics Demonstration Kit is an easy-to-use mechatronics development and demonstration platform. Mechatronics refers to implementing intelligent control in a mechanical system. Learn how to use PIC® microcontrollers to enhance or replace a mechanical design. The demonstration kit takes a hands-on approach to learning about mechatronics.
PICmicro® MCU Demo Boards and Kits PICDEM™ MC Development Board Finally, users can develop their application with a simple graphical interface, known as the Motor Control Graphical User Interface (MC-GUI). The MC-GUI provides a quick and easy way for designers to configure and monitor their motor system parameters, such as motor type, motor speed, rotational direction, current, voltage, heat sink temperature and Fault status.
Development Systems Ordering Guide NEW PICDEM™ MC LV Development Board The PICDEM MC LV Development Board provides a cost-effective method of evaluating and developing Sensored or Sensorless Brushless DC (BLDC) motor control applications. The board supports Microchip’s 28-pin, PIC18F microcontrollers and dsPIC30F Digital Signal Controllers. The board is capable of controlling motors rated up to 48V and 2.2 Amps.
PICmicro® MCU Demo Boards and Kits NEW PICDEM™ HPC Explorer Board Additional Features The PICDEM HPC Explorer Board is the latest 64/80 TQFP demonstration board for evaluating Microchip Technology’s PIC18F and PIC18FXXJXX families of devices. It comes populated with a PIC18F8722 MCU. Direct connection support is available for the MPLAB® ICE 2000 and MPLAB ICE 4000 processor modules, plug-in modules and MPLAB ICD 2 In-Circuit Programmer.
Development Systems Ordering Guide PICDEM™ USB Demonstration Kit The PICDEM USB Demonstration Kit from Microchip demonstrates a PICmicro® microcontroller (PIC16C765) communicating to a PC using the USB port. A traditional mouse, keyboard or joystick can be connected to the USB port on a computer using the preprogrammed board supplied in the kit.
PICmicro® MCU Demo Boards and Kits NEW PICDEM™ FS USB Demonstration Board Features The demonstration board provides the following functions: The PICDEM™ FS USB is a demonstration and evaluation board for the PIC18F4550 family of Flash microcontrollers with Full-Speed USB 2.0 interface.
Development Systems Ordering Guide NEW PICDEM™ LCD Demonstration Board Features The PICDEM LCD Demonstration Board will demonstrate the main features of the new LCD Flash 28, 40, 64 and 80-pin PICmicro® devices with power management features. The board will be populated with the PIC18F8490 and the other devices will be supported via a transition socket. A sample LCD glass display will be included for customer prototyping.
PICmicro® MCU Demo Boards and Kits NEW PICDEM™ Z 2.4 GHz Demonstration Kit The PICDEM™ Z Demonstration Kit is an easy-to-use ZigBee™ technology wireless communication protocol development and demonstration platform. The demonstration kit includes the ZigBee protocol stack and two PICDEM Z boards, each with an RF daughter card. The demonstration kit is also equipped with a 6-pin modular connector to interface directly with Microchip’s MPLAB® ICD 2 In-Circuit Debugger (DV164005).
Development Systems Ordering Guide PICDEM™ CAN-LIN Demonstration Boards Microchip offers three similar PICDEM CAN-LIN Demonstration Boards to support different PICmicro® devices. All demonstrate the main features of the devices, especially those features of the integrated CAN module. In addition to the CAN network, the board also employs a LIN subnetwork using Microchip’s PIC16C43X and PIC18F1320 device families.
PICmicro® MCU Demo Boards and Kits PICDEM™ LIN Demonstration Kit The PICDEM LIN Demonstration Kit demonstrates the capabilities of several Microchip microcontrollers using the LIN bus protocol. It supports slave node applications with PIC16C432, PIC16C433, PIC16C7XX and master node applications with PIC16X8X and PIC18FXX8. PIC16C432 and PIC16C433 have on-board LIN transceivers according to LIN bus specification V1.2.
Development Systems Ordering Guide PICDEM.net™ Demonstration/Evaluation Board The PICDEM.net Demonstration Board is an Internet/Ethernet demonstration board using the PIC18F452 microcontroller and TCP/IP firmware. It connects the PICmicro® MCU to the Local Area Network (LAN). It is a complete kit that is easy-touse (a PC is required for setup). Interconnection to a network can be accomplished in less than one hour. The board conforms to the standard 40-pin pinout used by the PIC16F877 or PIC18F452.
PICmicro® MCU Demo Boards and Kits NEW Low-Power Solutions Demonstration Board The Low-Power Solutions Demonstration Board provides designers a convenient and fun way to explore PICmicro® MCU nanoWatt features within a functional ultrasonic range finder application. It features the PIC18F4620, Microchip Technology’s latest power-managed device. The development tool is ideal for learning nanoWatt features and implementing system power reduction techniques.
Development Systems Ordering Guide NOTES: DS30177T-page 68 © 2005 Microchip Technology Inc.
dsPIC® DSC DEVELOPMENT BOARDS, KITS This section contains the following major topics: dsPICDEM™ Starter Development Board................................................................................. 70 dsPICDEM™ 28-Pin Starter Development Board ..................................................................... 71 dsPICDEM™ 1.1 General Purpose Development Board .......................................................... 72 dsPICDEM™ 2 Development Board ..................................................
Development Systems Ordering Guide dsPICDEM™ Starter Development Board The low-cost dsPICDEM™ Starter Development Board allows the user to easily validate a development tool setup using the dsPIC30F. It has a power supply regulator, crystal oscillator, MPLAB® ICD header, serial port, LEDs, push buttons, potentiometer and a prototyping area. In addition, all pins on the dsPIC® DSC device are brought out to a terminal block for access.
dsPIC® DSC Development Boards, Kits dsPICDEM™ 28-Pin Starter Development Board Features • dsPIC30F2010 28-pin SDIP sample device and socket • Power input from 9V supply • Connector for MPLAB ICD 2 In-Circuit Debugger • RS-232 interface • Header for access to all device I/O pins • Layout pad for 28-pin SOIC device • Prototyping area • Power-on demo program demonstrating interrupts, device I/O and UART communication • A tutorial program in Assembly code showing the user how to set up a project in MPLAB IDE T
Development Systems Ordering Guide dsPICDEM™ 1.1 General Purpose Development Board The dsPICDEM 1.1 General Purpose Development Board provides the application designer with a low-cost development tool to become familiar with the dsPIC30F 16-bit architecture, high-performance peripherals and powerful instruction set. The board features an active demonstration program loaded on the installed dsPIC30F6014 device. Several program functions are selectable via a menu system displayed on the LCD.
dsPIC® DSC Development Boards, Kits NEW dsPICDEM™ 2 Development Board The dsPICDEM™ 2 Development Board is a development and evaluation tool that helps you create embedded applications using dsPIC30F Digital Signal Controllers. Sockets are provided for 28 and 40-pin devices in the motor control family and 18, 28 and 40-pin devices in the general purpose and sensor family. The supported devices are shown in the table below.
Development Systems Ordering Guide dsPICDEM™ MC1 Motor Control Development Board The MC1 Motor Control Development Board provides the application developer with three main components for quick prototyping and validation of BLDC, PMAC and ACIM applications.
dsPIC® DSC Development Boards, Kits dsPICDEM.net™ 1 and dsPICDEM.net™ 2 Connectivity Development Boards The dsPICDEM.net 1 and dsPICDEM.net 2 Connectivity Development Boards provide the application developer a basic platform for developing and evaluating both connectivity and nonconnectivity-based requirements. The dsPICDEM.net Development Boards provide the hardware circuitry for supporting both the Public Switched Telephone Network (PSTN) and 10baseT MAC/PHY interfaces.
Development Systems Ordering Guide NOTES: DS30177T-page 76 © 2005 Microchip Technology Inc.
ANALOG AND MIXED-SIGNAL DEMO BOARDS AND KITS This section contains the following major topics: PICDEM™ MSC1 Demonstration Kit ........................................................................................ 78 PICDEM™ MSC1 Daughter Boards.......................................................................................... 79 MCP41XXX/42XXX Digital Potentiometer Evaluation Board .................................................... 80 MXDEV® 1 Analog Evaluation System Driver Board ...............
Development Systems Ordering Guide PICDEM™ MSC1 Demonstration Kit The PICDEM MSC1 Demonstration Kit with its PC-based Graphical User Interface (GUI) software serves as a demonstration board for the PIC16C781/782 microcontrollers. The user can configure the PIC16C781/782 from the easy-to-use PC software and download it to the microcontroller to evaluate the various peripherals and interconnect configurations.
Analog and Mixed-Signal Demo Boards and Kits PICDEM™ MSC1 Daughter Boards The following daughter boards, available separately, demonstrate additional capabilities of the PIC16C781/782 microcontrollers. PICDEM™ MSC1 Switch Mode Power Supply (SMPS) Daughter Board The PICDEM™ MSC1 Switch Mode Power Supply (SMPS) Daughter Board, in combination with the PICDEM MSC1 Demonstration Board, is a complete demonstration and evaluation kit for designing Switch mode power supplies using the PIC16C781/782.
Development Systems Ordering Guide MCP41XXX/42XXX Digital Potentiometer Evaluation Board The MCP41XXX/42XXX Evaluation Board is a demonstration and evaluation tool for Microchip Technology’s MCP41XXX/42XXX digital potentiometers. The MCP41XXX/42XXX Evaluation Board is designed to be used in conjunction with the MXDEV® Evaluation System.
Analog and Mixed-Signal Demo Boards and Kits MXDEV® 1 Analog Evaluation System Driver Board The MXDEV 1 Analog Evaluation System gives system designers the ability to control Microchip stand-alone analog devices, acquire data and then analyze the data using strip-charts, histograms and Fast Fourier Transforms (FFTs). User-friendly data analysis software is included with the device-specific daughter boards.
Development Systems Ordering Guide MXDEV® 1 MCP3XXX Single/Dual ADC Evaluation System Daughter Board Kit The MXDEV 1 MCP3XXX Single/Dual ADC Evaluation System Daughter Board Kit supports the following devices: MCP3001, MCP3002, MCP3201, MCP3202 and MCP3301. This kit includes jumper-selectable options for maximum flexibility. Choices include: • Selection of the signal source between the on-board potentiometer and an external source.
Analog and Mixed-Signal Demo Boards and Kits MXDEV® 1 MCP3XXX Quad/Octal ADC Evaluation System Daughter Board Kit The MXDEV 1 MCP3XXX Quad/Octal ADC Evaluation System Daughter Board Kit supports the following devices: MCP3004, MCP3008, MCP3204, MCP3208, MCP3302 and MCP3304. This kit includes jumper-selectable options for maximum flexibility. Choices include: • Selection of the signal source between the on-board potentiometer and an external source.
Development Systems Ordering Guide Fan Controllers and Serial Temperature Sensor Demo Boards TC642EV – Evaluation Kit for Brushless DC Fan Controllers TC650DEMO – Fan Controller Demo Board for TC650/651 The TC642EV is a complete evaluation kit for evaluating and prototyping brushless DC fan control circuits using Microchip’s TC642, TC646, TC647, TC648 and TC649 BDC fan controllers. The fan speed control signal can be provided by an external sensor or voltage signal, or from the on-board potentiometer.
Analog and Mixed-Signal Demo Boards and Kits MCP2510 CAN Developer’s Kit The MCP2510 CAN Developer’s Kit is a multi-function tool that speeds implementation of the MCP2510 stand-alone CAN controller by offering functions for controlling its feature set. In addition, this tool can be used to demonstrate basic CAN input/output functionality and monitor bus activity on the user’s CAN bus. It is ideal for new CAN users that want to understand how CAN may be used for network communication.
Development Systems Ordering Guide MCP250XX CAN I/O Expander Developer’s Kit The MCP250XX CAN I/O Expander Developer’s Kit includes everything needed to create a CAN-based system using Microchip’s CAN I/O expander family. It can be used to evaluate, demonstrate and develop CAN nodes using these CAN I/O expanders.
Analog and Mixed-Signal Demo Boards and Kits MCP2120/2150 Infrared Developer’s Kit The MCP2120/2150 Infrared Developer’s Kit includes everything needed to create a system that communicates using infrared wireless communication. It educates the designer on the IR communications technology and IrDA® protocol and can then be used to integrate these technologies into the designer’s product allowing proof of concept.
Development Systems Ordering Guide SEEVAL® 32 Serial EEPROM Evaluation System Designer’s Kit Microchip’s SEEVAL 32 Serial EEPROM Evaluation System Designer’s Kit supports all Microchip serial EEPROMs, including future devices. Through the use of a ZIF socket, standard DIP packages are directly supported. The 8-lead SOIC, TSSOP, MSOP, DFN and 5-lead SOT-23 packages can also be supported by using separate third party adapters.
Analog and Mixed-Signal Demo Boards and Kits 13.56 MHz Anticollision microID® Developer’s Kit for MCRF355 and MCRF360 The 13.56 MHz microID Developer’s Kit is an easy-touse tool for design engineers at all skill levels. This kit includes all the hardware, software, reference designs and samples required to get started in 13.56 MHz RFID designs. This kit is intended to demonstrate basic operation of the high-performance MCRF355 tagging chip and basic design of a simple RFID reader.
Development Systems Ordering Guide 13.56 MHz Anticollision microID® Developer’s Kit for MCRF355, MCRF360 and MCRF45X The 13.56 MHz microID Developer’s Kit is a highspeed, long range, easy-to-use tool for design engineers at all skill levels. This kit includes all the hardware, software, reference designs and samples required to get started in high-performance 13.56 MHz RFID designs. This kit is designed to demonstrate all 13.
Analog and Mixed-Signal Demo Boards and Kits Interface Products Linear Products MCP2510/2515 CAN Developer’s Kit MCP6SX2 PGA Photodiode PICtail™ Daughter Board Ordering Information: V251001 Speeds up software development and introduces CAN to those unfamiliar with the protocol. Combines a software development tool with a CAN message/communication tool. MCP2140 IrDA® Wireless Temp Demo Board Ordering Information: MCP2140DM-TMPSNS Demonstrates the MCP2140 device in a real-world application.
Development Systems Ordering Guide Linear Products (Cont.) Mixed-Signal Products MCP3221 12-Bit A/D PICtail™ Daughter Board TC340X Delta-Sigma A/D Converter Evaluation Kit Ordering Information: MCP3221DM-PCTL Ordering Information: TC3400EV The MCP3221 PICtail Daughter Board is designed to demonstrate Microchip’s MCP3221 device. The daughter board uses DataView™ Windows® software for a graphical real-time data analysis from the board through USB.
Analog and Mixed-Signal Demo Boards and Kits Power Management Products Power Management Products (Cont.) MCP1650 Boost Controller Evaluation Board MCP7384X Li Ion Battery Charger Evaluation Board Ordering Information: MCP1650EV Demonstrates the MCP165X Boost Controller product family in two high-power, boost converter applications.
Development Systems Ordering Guide Thermal Management Products Thermal Management Products (Cont.) TC64X/64XB Fan Speed Controller Evaluation Board TC72 Digital Temperature Sensor PICtail™ Daughter Board Ordering Information: TC642EV Ordering Information: TC72DM-PICTL This is a complete evaluation board for evaluation and prototyping brushless DC fan control circuits using the TC642, TC646, TC647, TC648 and TC649 BDC fan controllers.
Analog and Mixed-Signal Demo Boards and Kits Analog Software Tools FilterLab® Active Filter Design Software The FilterLab® Active Filter Design Software tool simplifies active filter design. Available at no cost, the FilterLab Active Filter Design Software tool provides full schematic diagrams of the filter circuit with component values and displays the frequency response. SPICE Software Models Modeling is the heart of any SPICE simulation system and Microchip provides a variety of model libraries.
Development Systems Ordering Guide NOTES: DS30177T-page 96 © 2005 Microchip Technology Inc.
KEELOQ® SECURITY ICs EVALUATION KIT This section contains the following major topics: KEELOQ® Security ICs Evaluation Kit II ..................................................................................... 98 © 2005 Microchip Technology Inc.
Development Systems Ordering Guide KEELOQ® Security ICs Evaluation Kit II The KEELOQ Security ICs Evaluation Kit II provides the opportunity to evaluate KEELOQ Security ICs code hopping technology quickly and easily without having to make a large capital investment.
BATTERY MANAGEMENT This section contains the following major topics: PowerSmart® Battery Management Evaluation Kits for 2, 3 and 4 Series Cell Lithium Ion/ Polymer Chemistries ............................................................................................................... 100 PowerSmart® Battery Management Monitor Evaluation Kit for 1 and 2 Series Cell Lithium Ion/ Polymer Chemistries .............................................................................................................
Development Systems Ordering Guide PowerSmart® Battery Management Evaluation Kits for 2, 3 and 4 Series Cell Lithium Ion/Polymer Chemistries The PowerSmart Battery Management Evaluation Kits for Lithium Ion/Polymer chemistries provide the opportunity to evaluate a Microchip battery management solution for Lithium-based battery packs.
Battery Management PowerSmart® Battery Management Monitor Evaluation Kit for 1 and 2 Series Cell Lithium Ion/Polymer Chemistries The PowerSmart Battery Management Evaluation Kit for Lithium Ion/Polymer chemistries provides the opportunity to evaluate a Microchip battery monitor solution for one or two series cell Lithium-based battery packs. The evaluation kit contains all of the hardware and software necessary to incorporate a functional fuel gauge and safety module into a battery pack.
Development Systems Ordering Guide NOTES: DS30177T-page 102 © 2005 Microchip Technology Inc.
CROSS REFERENCE This section contains the following major topics: Development Systems Cross Reference Table.......................................................................104 © 2005 Microchip Technology Inc.
DS30177T-page 104 Lead Count/ Pkg Type Processor Module 18P 14P 14SO 18P 18P MCP2150 MCP250XX MCP250XX MCP2510 MCP2515 8P 6OT 8P 6OT 8P 8P, 8JW 8SM PIC10F206 PIC10F220 PIC10F220 PIC10F222 PIC10F222 PIC12C508 PIC12C508 NOTE: AC124001 6OT PIC10F206 XLT08SO 8P PIC10F204 See complete list of notes following this table.
Lead Count/ Pkg Type Processor Module Device Adapters © 2005 Microchip Technology Inc.
Lead Count/ Pkg Type Processor Module Device Adapters DS30177T-page 106 8P 8SN 8MF 8P 8SN 8MF 8P 8SN 8MF PIC12F629 PIC12F629 PIC12F629 PIC12F635 PIC12F635 PIC12F635 PIC12F675 PIC12F675 PIC12F675 PCM12XB0 PCM12XB0 PCM12XB0 PCM16YM0 PCM16YM0 PCM16YM0 PCM12XB0 PCM12XB0 PCM12XB0 PCM16XA0 PCM16XA0 PCM16XA0 PCM16XA0 DVA12XP081 DVA12XP081 DVA12XP081 DVA1002 DVA1002 DVA1002 DVA12XP081 DVA12XP081 DVA12XP081 DVA12XP080 DVA12XP080 DVA12XP080 DVA12XP080 See complete list
Lead Count/ Pkg Type Processor Module Device Adapters © 2005 Microchip Technology Inc. 20SS PCM16XA0 PCM16XA0 PCM16XA0 PCM16XA0 DVA16XP180 DVA16XP180 DVA16XP180 DVA16XP280 DVA16XP280 DVA16XP280 DVA16XP280 DVA16XP180 DVA16XP180 DVA16XP180 DVA16XP280 DVA16XP280 DVA16XP280 DVA16XP280 DVA16XP180 DVA16XP180 DVA16XP180 DVA16XP180 DVA16XP180 DVA14XP280 DVA14XP280 DVA14XP280 DVA1002 DVA1002 DVA1002 See complete list of notes following this table.
Lead Count/ Pkg Type Processor Module Device Adapters DS30177T-page 108 NOTE: PIC16C65B PCM16XE1 PCM16XE1 PCM16XE1 PCM16XE1 PCM16XB1 PCM16XB1 PCM16XB1 PCM16XB1 PCM16XB1 PCM16XB1 PCM16XB1 PCM16XB1 PCM16XE1 PCM16XE1 PCM16XE1 PCM16XE1 PCM16XB1 PCM16XB1 PCM16XE1 PCM16XE1 PCM16XE1 DVA16XP282 DVA16PQ441 DVA16PQ441 DVA16XL441 DVA16XP401 DVA16PQ441 DVA16PQ441 DVA16XL441 DVA16XP401 DVA16PQ441 DVA16PQ441 DVA16XL441 DVA16XP401 DVA16XP282 DVA16XP282 DVA16XP282 DVA16XP282 DVA1
Lead Count/ Pkg Type Processor Module Device Adapters © 2005 Microchip Technology Inc.
Lead Count/ Pkg Type Processor Module Device Adapters DS30177T-page 110 20P, 20JW 20SS 18P, 18JW 18SO 14P, 14JW 14SL 18P, 18JW 18SO 20SS 28P PIC16C432 PIC16C432 PIC16C433 PIC16C433 PIC16C505 PIC16C505 PIC16C554 PIC16C554 PIC16C554 PIC16C557 20SS PIC16C620/ 620A PIC16C620/ 620A PCM16XC0 PCM16XC0 PCM16XC0 PCM16XC0 PCM16XC0 PCM16XC0 PCM16XC0 PCM16XC0 PCM16XC0 PCM16XA0 PCM16XA0 PCM16YC0 PCM16YC0 PCM16YB0 PCM16YB0 PCM16XE1 PCM16XE1 PCM16XE1 PCM16XE1 PCM16XE1 PCM16XE
Lead Count/ Pkg Type Processor Module Device Adapters © 2005 Microchip Technology Inc. 20SS PCM16XE1 PCM16XE1 PCM16XE1 DVA16XP182 DVA16XP182 DVA16XP182 DVA16XP180 DVA16XP180 DVA16XP180 DVA16XP182 DVA16XP182 DVA16XP182 DVA16XP180 DVA16XP180 DVA16XP180 DVA16XP180 DVA16XP180 DVA16XP180 DVA16PQ441 DVA16PQ441 DVA16XL441 DVA16XP401 DVA16XP282 DVA16XP282 DVA16XP180 DVA16XP180 DVA16XP180 DVA16XP180 DVA16XP180 DVA16XP180 See complete list of notes following this table.
Lead Count/ Pkg Type Processor Module Device Adapters DS30177T-page 112 PCM16XJ0 PCM16XJ0 PCM16XJ0 PCM16XW0 PCM16XW0 PCM16XW0 PCM16XW0 PCM16XW0 PCM16XW0 PCM16XL0 PCM16XL0 PCM16XL0 PCM16XL0 PCM16XL0 PCM16XL0 PCM16XL0 PCM16XN1 PCM16XN1 PCM16XN1 PCM16XN1 PCM16XN1 PCM16XN1 PCM16XQ1 PCM16XQ1 PCM16XQ1 PCM16XQ1 DVA16XL680 DVA16PQ640 DVA16XP640 DVA16XP202 DVA16XP202 DVA16XP202 DVA16XP202 DVA16XP202 DVA16XP202 DVA16PQ441 DVA16PQ441 DVA16XL441 DVA16XP401 DVA16XP282 DVA16XP2
Lead Count/ Pkg Type Processor Module Device Adapters © 2005 Microchip Technology Inc.
Lead Count/ Pkg Type Processor Module Device Adapters DS30177T-page 114 40P 44L 44PT PIC16F74 PIC16F74 PIC16F74 44ML 44PT PIC16F77 PIC16F77 PIC16F77 NOTE: PCM16XS2 PCM16YG0 PCM16YG0 PCM16YG0 PCM16YG0 PCM16XH1 PCM16XH1 PCM16XH1 PCM16XH1 PCM16XH1 PCM16XH1 PCM16XH1 PCM16XS2 PCM16XS2 PCM16XS2 PCM16XS2 PCM16XS2 PCM16XS2 PCM16XS2 PCM16XS2 PCM16XS2 PCM16XS2 PCM16XS2 PCM16XS2 PCM16XS2 PCM16XS2 PCM16XS2 DVA16XP186 DVA16XP186 DVA16XP186 DVA16XP186 DVA16XP180 DVA16XP180
Lead Count/ Pkg Type Processor Module Device Adapters © 2005 Microchip Technology Inc.
Lead Count/ Pkg Type Processor Module Device Adapters DS30177T-page 116 14ST 14P 14SL PIC16F676 PIC16F684 PIC16F684 NOTE: PCM16YK0 PCM16YK0 PCM16YK0 PCM16YD0 PCM16YD0 PCM16YD0 PCM16YF0 PCM16YF0 PCM16YF0 PCM16YF0 PCM16YM0* PCM16YM0* PCM16YM0* PCM16YM0 PCM16YM0 PCM16YM0 PCM16YD0 PCM16YD0 PCM16YD0 DVA1002 DVA1002 DVA1002 DVA16XP141 DVA16XP141 DVA16XP141 DVA16XP186 DVA16XP186 DVA16XP186 DVA16XP186 DVA1002 DVA1002 DVA1002 DVA1002 DVA1002 DVA1002 DVA16XP141 DVA16XP14
Lead Count/ Pkg Type Processor Module Device Adapters © 2005 Microchip Technology Inc.
Lead Count/ Pkg Type Processor Module Device Adapters DS30177T-page 118 28SS 40P 44L 44PT PIC16F870 PIC16F871 PIC16F871 PIC16F871 PCM16XR1 PCM16XR1 PCM16XR1 PCM16XR1 PCM16XR1 PCM16XR1 PCM16YE0 PCM16YE0 PCM16YE0 PCM16YE0 PCM16YE0 PCM16YE0 PCM16YE0 PCM16YE0 PCM16YN0* PCM16YN0* PCM16YN0* PCM16YH0 PCM16YH0 PCM16YH0 PCM16YH0 DVA16PQ441 DVA16XL441 DVA16XP401 DVA16XP282 DVA16XP282 DVA16XP282 DVA16XP186 DVA16XP186 DVA16XP186 DVA16XP186 DVA16XP186 DVA16XP186 DVA16XP186 D
Lead Count/ Pkg Type Processor Module Device Adapters © 2005 Microchip Technology Inc.
Lead Count/ Pkg Type Processor Module Device Adapters DS30177T-page 120 44ML 28P 28SO 28SS 28ML 40P 44PT 44ML 18P, 18JW 18SO PIC16F914 PIC16F916 PIC16F916 PIC16F916 PIC16F916 PIC16F917 PIC16F917 PIC16F917 PIC16HV540 PIC16HV540 NOTE: PCM17XA0 PCM17XA0 PCM17XA0 PCM17XA0 PCM16YP0* PCM16YP0* PCM16YP0* PCM16YP0* PCM16YP0* PCM16YP0* PCM16YP0* PCM16YP0* PCM16YP0* PCM16YP0* PCM16YP0* PCM16YP0* PCM16YP0* PCM16YP0* PCM16XV0 PCM16XV0 PCM16XV0 PCM16XV0 DVA17PQ441 DVA17PQ4
Lead Count/ Pkg Type Processor Module Device Adapters © 2005 Microchip Technology Inc.
Lead Count/ Pkg Type Processor Module Device Adapters DS30177T-page 122 NOTE: PCM18XA0 PCM18XH2 PCM18XH2 PCM18XH2 PCM18XD1 PCM18XD1 PCM18XH2 PCM18XH2 PCM18XD1 PCM18XD1 PCM18XH2 PCM18XH2 PCM18XB0 PCM18XB0 PCM18XB0 PCM18XB0 PCM18XA0 PCM18XA0 PMF18WC1 DVA16PQ441 or DVA18PQ440 PMF18WC1 PMF18WC1 XLT44PT or XLT44PT3 XLT28SO DVA16XL441 DVA16XP401 or DVA18XP400 DVA16XP282 DVA16XP282 PMF18WC1 DVA16XP282 or DVA18XP280 XLT28SO PMF18WC1 XLT28SO DVA16XP282 or DVA18XP280 DVA16XP282 XL
Lead Count/ Pkg Type Processor Module Device Adapters © 2005 Microchip Technology Inc.
Lead Count/ Pkg Type Processor Module Device Adapters DS30177T-page 124 28SS 28SP PIC18F24J10 PIC18F2510 NOTE: PCM18XN0 PCM18XN0 PCM18XN0 PCM18XP0 PCM18XP0 PCM18XP0 PCM18XR0 PCM18XR0 PCM18XL0 PCM18XL0 PCM18XL0 PCM18XN0 PCM18XN0 PCM18XN0 PCM18XN0 PCM18XN0 PCM18XN0 PCM18XL0 PCM18XL0 PCM18XL0 DVA18XP280 DVA18XP280 DVA18XP280 DVA18XP280 DVA18XP280 DVA18XP280 DVA18XP280 DVA18XP280 DVA18XP280 DVA18XP280 DVA18XP280 DVA18XP280 DVA18XP280 DVA18XP280 DVA18XP280 DVA18XP280
Lead Count/ Pkg Type Processor Module Device Adapters © 2005 Microchip Technology Inc. PIC18F2550 28SP 28SO PIC18F2680 PIC18F2680 PCM18XP0 PCM18XP0 PCM18XN0 PCM18XN0 DVA18XP280 DVA18XP280 DVA18XP280 DVA18XP280 DVA18XP280 See complete list of notes following this table.
Lead Count/ Pkg Type Processor Module Device Adapters DS30177T-page 126 40P 44ML 44PT 40P 44PT 44ML 40P 44PT 44ML PIC18F4320 PIC18F4320 PIC18F4320 PIC18F4321 PIC18F4321 PIC18F4321 PIC18F4331 PIC18F4331 PIC18F4331 PIC18F4420 PCM18XN0 PCM18XN0 PCM18XN0 PCM18XN0 PCM18XN0 PCM18XN0 PCM18XL0 PCM18XL0 PCM18XL0 PCM18XN0* PCM18XN0* PCM18XN0* PCM18XH2 PCM18XH2 PCM18XH2 PCM18XN0* PCM18XN0* PCM18XN0* PCM18XH2 PCM18XH2 PCM18XH2 DVA18XP400 DVA18PQ440 DVA18XP400 DVA18XP400 D
Lead Count/ Pkg Type Processor Module Device Adapters © 2005 Microchip Technology Inc.
Lead Count/ Pkg Type Processor Module Device Adapters DS30177T-page 128 40P 44ML 44PT 40P 44ML 44PT PIC18F4539 PIC18F4539 PIC18F4539 PIC18F4550 PIC18F4550 PIC18F4550 40P 44PT 44ML PIC18F45J10 PIC18F45J10 PIC18F45J10 PCM18XP0 PCM18XP0 PCM18XP0 PCM18XP0 PCM18XP0 PCM18XP0 PCM18XR0 PCM18XR0 PCM18XR0 PCM18XN0 PCM18XN0 PCM18XN0 PCM18XN0 PCM18XN0 PCM18XN0 DVA18XP400 DVA18PQ440 DVA18XP400 DVA18XP400 DVA18PQ440 DVA18XP400 DVA18PQ440 DVA18XP400 DVA18XP400 DVA18XP400 DVA1
Lead Count/ Pkg Type Processor Module Device Adapters © 2005 Microchip Technology Inc.
Lead Count/ Pkg Type Processor Module Device Adapters DS30177T-page 130 68L 64PT 64PT 64PT 64PT 80PT 80PT 80PT 80PT 80PT 80PT 80PT 80PT 80PT 80PT 80PT 80PT PIC18F6680 PIC18F6680 PIC18F6720 PIC18F6722 PIC18F67J10 PIC18F8310 PIC18F8390 PIC18F8410 PIC18F8490 PIC18F8520 PIC18F8525 PIC18F8527 PIC18F8585 PIC18F8620 PIC18F8621 PIC18F8622 PIC18F8627 PCM18XS0 PCM18XS0* PCM18XK0 PCM18XE1 PCM18XK0 PCM18XS0* PCM18XK0 PCM18XE1 PCM18XQ0 PCM18XQ0 PCM18XQ0 PCM18XQ0 PCM18XS0
Lead Count/ Pkg Type Processor Module Device Adapters © 2005 Microchip Technology Inc.
Lead Count/ Pkg Type Processor Module DS30177T-page 132 40P 44PT 44ML dsPIC30F4013 dsPIC30F4013 dsPIC30F4013 See complete list of notes following this table.
Lead Count/ Pkg Type Processor Module © 2005 Microchip Technology Inc. 64PT See complete list of notes following this table.
MPLAB® ICE 2000 pod available separately. (ICE2000) MPLAB® ICE 4000 pod available separately. (ICE4000) PRO MATE® II Programmer unit (no longer available). (DV007003) Optional In-Circuit Serial Programming™ (ICSP™) Socket for PRO MATE® II available separately. (AC004004) PICSTART® Plus (DV003001) MPLAB® ICD 2 In-Circuit Debugger. Configurations are: (DV164005) ICD 2 module, USB cable and ICD cable. (DV164006) ICD 2 module, USB cable, ICD cable, serial cable, PICDEM™ 2 Plus and power supply.
Part Number © 2005 Microchip Technology Inc. PICDEM™ MC Development Board (uses 28L/40L PIC18FXX31 family) PICDEM™ MC LV Development Board (uses 28L PIC18F2331, 2431, dsPIC30F family) DM183011 DM183021* PICDEM™ Z Motherboard PICDEM™ Z 2.4 GHz RF Card AC163027-1 AC163027-2 * Contact Microchip web site at www.microchip.com for availability. PICDEM™ FS USB Demo Board DM163015 PICDEM™ Z 2.
DS30177T-page 136 PICDEM™ MSC 1 Mixed Signal Controller Demo Board for PIC16C781/782 DM163012 dsPICDEM™ 1.1 General Purpose Demo Board dsPICDEM™ 64-Pin Starter Demo Board DM300014 DM300016 dsPICDEM™ MC1H 3-Phase High Voltage Power Module dsPICDEM™ MC1L 3-Phase Low Voltage Power Module DM300020 DM300021 DM300022 dsPIC® V.22/V.
CMX-Tiny+ for dsPIC® DSC: Preemptive RTOS SW300032 © 2005 Microchip Technology Inc. dsPIC® Speech Coding/Decoding Library (Eval, 5K, 25K, 100K licenses, respectively) PS700 Battery Monitor Evaluation Board with PS051 PowerInfo™ 2 PS8X0 Li-Ion/Poly Single Cell Fuel Gauge PS8X0 Li-Ion/Poly Single Cell Fuel Gauge with PS051 PowerInfo™ 2 PS7070EV PS8070* PS8070EV* * Contact Microchip web site at www.microchip.com for availability.
DS30177T-page 138 Transponder Evaluation Kit* PRO II Universal Programmer for DIP* AC004004 AC004001 AC004002 DM303006 – HCS101 AC004004 AC004001 AC004002 DM303006 AC004004 AC004001 AC004002 DM303006 DM303005 HCS410/412 Devices Supported Part Number Linear MCP6S22/92 DV3201A DV3201A MCP3201/02 Evaluation System Daughter Board Evaluation Kit for Sigma-Delta A/D Converter Family Single-Dual A/D MXSIGDM TX3400EV Mixed Signal PICtail™ Demo Board AC164002 – DV103006 HCS512 AC1640
MCP3204, MCP3208 © 2005 Microchip Technology Inc. MCP1630RD-DDBK1 MCP1630RD-LIC1 MCP1630DM-NMC1 MCP1630 +12V Dual Output Buck Converter Ref. Design MCP1630 Li-Ion Multi Bay Battery Charger Ref.
Development Systems Ordering Guide NOTES: DS30177T-page 140 © 2005 Microchip Technology Inc.
Index A Analog and Mixed-Signal Demo Boards and Kits 13.56 MHz Anticollision microID Developer’s Kit for MCRF355/360 (DV103003) ................................... 89 13.56 MHz Anticollision microID Developer’s Kit for MCRF355/360/45X (DV103006) ............................ 90 FilterLab Active Filter Design Software .................................. 95 MCP1252 Charge Pump Backlight Demo Board (MCP1252DM-BKLT) .............................................
Development Systems Ordering Guide D MPLAB ICD 2 Evaluation Kit (DV164006) ..............................32 MPLAB ICD 2 Module (DV164005) ........................................32 MPLAB ICD 2 Module ws (DV164007) ...................................32 MPLAB ICD 2 with dsPICDEM 1.1 General Purpose Demonstration Board (DV164032) .........................32 MPLAB ICD 2 with dsPICDEM Starter Demonstration Board (DV164030) .........................
Index P PICmicro MCU Demo Boards and Kits Low-Power Solutions Demonstration Board (DM163026) ........................................................... 67 PICDEM 1 Demonstration Board (DM163001) ...................... 52 PICDEM 17 Demonstration Board (DM173001) .................... 52 PICDEM 18R Demonstration Kit (DM163006) ....................... 55 PICDEM 2 Plus Demonstration Board (DM163022) .............. 53 PICDEM 3 Demonstration Board (DM163003) ......................
Development Systems Ordering Guide dsPIC30F Speech Recognition Library Software License - Evaluation Copy (SW300010-EVAL) ................................................ 15 dsPIC30F Speech Recognition Library Software License - Up to 5K Units (SW300010) ................... 15 dsPIC30F V.22bis Soft Modem Library (SW300002) ............. 14 dsPIC30F V.32bis Soft Modem Library Software License - 25K to 100K Units (SW300005) ............. 14 dsPIC30F V.
Index NOTES: © 2005 Microchip Technology Inc.
WORLDWIDE SALES AND SERVICE AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE Corporate Office 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200 Fax: 480-792-7277 Technical Support: http://support.microchip.com Web Address: www.microchip.
