User manual

1. Introduction
1.1. Features
• ATBTLC1000-MR110CA Bluetooth module
– Complies with Bluetooth V4.1, ETSI EN 300 328 and EN 300 440 Class 2, FCC CFR47 Part
15, and ARIB STD-T66
– ARM
®
Cortex
®
-M0 32-bit processor
• AT30TSE758A Digital Temperature Sensor
– Integrated temperature sensor + nonvolatile registers + serial EEPROM
– 2-Wire I
2
C and SMBus compatible serial interface
• Xplained Pro hardware identification system using ATSHA204A
• Power LED
• Power debugger support using current measurement header
• Provision for external flash (footprint only). Recommended MPN: IS25LD020-JNLE.
• Debug I
2
C header
• Debug UART/SPI extension port
• CHIP EN switch for ATBTLC1000 module (footprint only)
• SWD header
• 32kHz crystal
1.2. Kit Overview
The Atmel ATBTLC1000 Xplained Pro is an extension board containing the Atmel ultra-low power
Bluetooth module ATBTLC1000-MR110CA for the Xplained Pro platform. The kit can be connected to any
extension header on an Xplained Pro MCU Board.
Atmel ATBTLC1000 Xplained Pro [USER GUIDE]
Atmel-42538B-BTLC1000-Xplained-Pro_User Guide-11/2015
3