Regulatory Compliance Information BM83 Regulatory Compliance Information Revision 0.0 Mar’ 2019 Preliminary Revision 0.
This document covers the Regulatory Compliance information which will be part of the BM83 Module datasheet and related documents shared with customers. 1 Revision 0.
1.1 BM83 Usage Instructions under Modular Approval (a) FCC/ISED certification is valid only for the shielded version of the module. (b) Module placement guideline The host board should provide a continuous ground plane with minimum size equal to the module dimension directly beneath the module (16mmx19mm ). Provide ground plane with distributed via stitching.
2.1 United States The BM83 module has received Federal Communications Commission (FCC) CFR47 Telecommunications, Part 15 Subpart C “Intentional Radiators” single-modular approval in accordance with Part 15.212 Modular Transmitter approval. Single modular transmitter approval is defined as a complete RF transmission sub-assembly, designed to be incorporated into another device, that must demonstrate compliance with FCC rules and policies independent of any host.
• • • • Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help Additional information on labeling and user information requirements for Part 15 devices can be found in KDB Publication 784748, which is available at the FCC Office of Engineering and Technology (OET) Laboratory Division Knowled
3.1 Canada The BM83 module has been certified for use in Canada under Innovation, Science and Economic Development Canada (ISED, formerly Industry Canada) Radio Standards Procedure (RSP) RSP-100, Radio Standards Specifi- cation (RSS) RSS-Gen and RSS-247. Modular approval permits the installation of a module in a host device without the need to recertify the device. 3.1.
